3-form SimpleSpec 200.43 User manual

For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go

Contents Overview
(1)
Fin Base Profile
122" Length
0-60-2266
(2)
Fin Cover Profile
122" Length
0-60-2267
(2)
Aluminum
Shim for Fin
0-60-2274
(1)
Chroma 15¾"  96"  ½"
(4)
M6  40mm
Std SHCS
3-15-0709
(4)
M6 Washer
3-15-3040
(4)
M6 Hexagon Nut
3-15-3060
(1)
Light Drive RGB -
DMX Wall Control
3-60-510
(1)
Fin End Cap KIT
3-60-2268-K
= +
Lightbox Heat
Sink Screw
3-15-7780
(2)
Fin End Cap
3602268
(1)
96W Dimmable
Power Supply
3-60-765
(1)
(1)
Fin End Cap with
Strain Relief Hole KIT
3-60-2271-K
= +
Lightbox Heat
Sink Screw
3-15-7780
(2)
Fin End Cap
3602271
(1)
3 Channel PWM
DMX Interface
3-60-000
(1)
2
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go

Overview
96"
(2439mm)
2⅞"
(73mm) 16"
(407mm)
Fin End
Cap KIT
3602268-K
Chroma Panel
½" Gauge
Fin End Cap
with Strain Relief
Hole KIT
3602271-K
Fin Base
Profile
0602266
Fin Cover
Profile
0602267
Alumninum
Shim for Fin
0602274
+
+
3
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go

Installation
0-60-2266
1Drill and Anchor
Drill ¼" holes in Fin Base Proile for anchoring with maximum of 30" spacing and no more than 12" from edge.
a
Drill Drill Bits Driving Bits
Required Tools
⁄"  1¾" (or ¼"or M6)
Wood or Concrete Anchors
4
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go

Installation
1Drill and Anchor cont...
Anchor
Anchor Fin into wall using appropriate anchors for wall surface. Anchors to be supplied by installer.
b
5
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go

Installation
2Attach Cover Proiles
0-60-2267
(×2)
6
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go

3Connect Electrical
Have a qualiied electrician wire the lighting to a remote driver (in remote location) and test the lights.
3-6-000
3-Channel PWM
DMX Interface
96W
Blue
Brown
Black
White
Red
Black
+
1
PWM OUTPUT DC IN
2 3
+
+
+
- - - -
3-6-51
Light Drive RGB
To Additional
3-Channel Interfaces
CAT V Cable
CAT V Cable
(included w/Light Drive)
12-48V DC
DMX
IN OUT
Line Voltage
30' Cable
to Fin or Countertop (can
be extended an additional
20' with 14AWG+)
Blue Wire = (-) Blue LED
Brown Wire = (-) Green LED
Black Wire = (-) Red LED
White Wire = (+) 24VDC
Black
(neutral) (line)
White
3-60-765
Power Supply
Fin or
Countertop
Installation
7
For more information, please visit 3-form.com or call 800.726.0126
JUNE 2018 | MANRTG20043 | REV 002 © 2018 3form, Inc. All rights reserved.
SimpleSpec 200.43tm Installation Manual
Ready To Go