3-form Versa Series User manual

The Versa family from 3form is the perfect answer to movable and stationery partitions and room dividers, shelving, and hinged doors. This system is extremely versatile to
meet nearly all installation requirements and aesthetic preferences, complementing the beautiful material from 3form. It is easily conigured, easy to work with, and designed
speciically to work with 3form materials.
Using this Installation Manual – because there are many components and possibilities with 3form Versa hardware, this manual is organized by individual component
installation. Please see pages 2933 for dierent installation components and applications, and follow the corresponding page # to ind instructions for that particular
element of the installation.
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual

Table of Contents
Proiles and Platforms
Delection Charts
Point Support with Versa
Partitions - Floor to Ceiling
1
2
6
10
Dividers - Cantilever and Freestanding14
Doors19
Pony Walls23
Shelving25
Versa Base Plates34
Pressure Fit Ceiling37
Top Caps38
Freestanding Feet39
Casters40
Perpendicular Attachment40
Pivoting Base41
Mitered Corner Splice42
Drop Ceilings43
Extrusion Slot Covers44
Side Bracket Attachment45
Shelving and Spider Attachment46
Panel Size and Gauge Attachment Chart48
Flat Spider Attachment49
Door Hinges50
Door Catch51
Door Latch52
Slim Proile Connection53
Versa System Overview
1
Versa Solutions10
Installation29
General Speciications54
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual

As the foundation of the Versa system, multiple proiles are available for both installation versatility and aesthetic preference.
Uses of these proiles will be outlined later in this document.
For Assembly Instructions Turn Directly To Page 29
Overview
Proiles
Blade
90mm
24mm
35mm
Available in
max. 14'-0" length.
Longer available by
request.
60mm
60mm
Block
Available in
max. 10'-0" length.
Longer available by
request.
35mm
60mm
Oval
Available in
max. 10'-0" length.
Longer available by
request.
60mm
35mm
Bar
Available in
max. 10'-0" length.
Longer available by
request.
60mm
60mm
Square
Available in
max. 10'-0" length.
Longer available by
request.
32mm
37.5mm
Slim One
Available in
max. 10'-0" length.
32mm
40mm
Slim Two
Available in
max. 10'-0" length.
40mm
40mm
Slim Four
Available in
max. 10'-0" length.
35mm
90mm
Beam
Available in
max. 14'-0" length.
Longer available by
request.
Material is supported in all Versa applications using either Spiders with through holes or Brackets with pressure-it set screws or
brackets with through holes.
Platforms
Spiders Brackets
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
1

Overview
Recommended Length Floor to Ceiling Condition
Concrete Floor
Use the following chart for delection estimates and recommended maximum lengths by condition for loor to ceiling
installations. This chart is based on L/240 delection and forces being transferred on the Versa proile in its strong direction (the
deepest dimension).
All calculations for this condition are based on the proile as show loor to ceiling anchored to concrete using the 2Part Base Plate
(31565-KC) and assumes the connection to the loor and ceiling is rigid. Other conditions such as the pressure it assemble
at the ceiling, rotating base at loor, or substandard substrate anchorate will create conditions where additional delection can be
anticipated.
Floor to Ceiling Condition
10'-5" 0" ⅓" ⁄"⅛" Blade
10'-5" 0" ⅓" ⁄"⅛" Beam
10'-0" ⅜"⅓" ⁄" ¼" Square
10'-0" ⅜"⅓" ⁄" ¼" Block
8'-0" ⁄"
⅓" -
⅜"
Oval
8'-0" ⁄”⅓” ⅜" -Bar
5'-2" ⁄" - - -Slim Four
5'-4" ⁄" - - -Slim Two
⁄" ---4'-4"Slim One
4'-0" 10'-0"8'-0"6'-0"
Delection anticipated at center
span assuming 5 PSF force over
max length  4' width s.f.
transferred to this post
Recommended allowable length
for this condition to minimize
delection
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
2

Overview
Recommended Length Cantilever Condition
Concrete Floor
Use the following chart for delection estimates and recommended maximum lengths by condition for loor to ceiling installations.
This chart is based on L/180 delection and forces being transferred on the Versa proile in its strong direction (the deepest
dimension).
All calculations for this condition are based on the proile as show anchored to concrete loor using the 2Part Base Plate
(31565-KC) and assumes the connection to the loor is rigid. Other conditions such as the pressure it assemble at the ceiling,
rotating base at loor, or substandard substrate anchorate will create conditions where additional delection can be anticipated.
Cantilever Condition
⅜"
⅜"
-
-
-
-
-
-
-
⅜"⁄"
⅜"⁄"
-
⁄"
-
⁄"
--
- -
- -
- -
--
6'-0"5'-0"
8'-0" 0" 0" ⁄"⅓" Blade
8'-0" 0" 0" ⁄"⅓" Beam
4'-9" ⁄" 0" 0" ⁄" Square
4'-9" ⁄" 0" 0" ⁄" Block
4'-0" ⅓"
0" ¼"⁄"
Oval
4'-0" ⅓" 0" ⁄" ¼" Bar
3'-1" 0" ⅓" ⁄" -Slim Four
3'-2" 0" ⅓" ⁄" -Slim Two
0" --
⁄"
2'-7"Slim One
1'-0" 4'-0"3'-0"2'-0"
Delection anticipated at center span assuming
5 PSF force over max length  4' width s.f.
transferred to this post
Recommended allowable length
for this condition to minimize
delection
8'-0"
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
3

Overview
Many dierent options are available depending on the installation requirements and preferences. Example solutions on the follow-
ing pages will highlight these various capabilities and recommended material types and gauges for each solution.
Accessories
This system oers all the components you will need to create installations in the following categories.
Applications
Partitions Dividers Doors Shelving
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
4

The top pressure it assembly is an integral part of most Versa installations (ig.1). It is composed of an adjustable top plate, a
threaded rod, and a barrel nut. Once the top and bottom plates are in place and secure, threading the barrel nut against the Versa
Profile extends the top plate irmly against the ceiling. The top adjustable plate can be attached to the ceiling with screws or can
simply be secured with pressure using the barrel nut (ig. 2 & 3). The maximum extension of the threaded rod
should be 6", please account for this when determining the proile lengths.
Pressure Fit Assembly
Overview
Fig 1 Fig 3Fig 2
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
5

2× Panel
gauge min.*
*Varia Only. For other
materials see spec sheets
Hardware shown in this document is for interior use only.
Overview
Panel Caps
Material recommendations
Do not use cyanoacrylate or solvent type thread locking materials with Varia.
3form materials must be separated from metal at all times, especially threads. 1" diameter caps ship bundled with press-it
washers which press into a ⅝" diameter hole to stay in place during the installation process to protect the panel from any metal
contact. ¾" diameter caps (315-2-K) are meant only for Varia and cannot be used with other materials.
3-15-175 Pressure Fit Washer ships together
with 1" dia. caps
3form Varia and Monolithic Glass must be protected from metal at all times, refer to the next page for Instructions. See Versa
Glass Integrator Solution Document for more information on glass.
Part Number Notes
315-2-K
315-25K use press it washers as
described next page
use provided washer front and
back of panel
315-26K
315-27K use press it washers as
described next page
use press it washers as
described next page
315-28K use press it washers as
described next page
Thread Size
(3/4") 20mm  (3/4") 20mm
M8 Thread
(1") 25mm  (3/4") 20mm
M8 Thread
(1") 25mm  (11/16") 17mm
M8 Thread
(1") 25mm  (3/8") 10mm
M8 Thread
(1") 25mm  (1") 25mm
M8 Thread
Hole Size to Drill
1/2"
5/8"
5/8"
5/8"
5/8"
315-29K use press it washers as
described next page
3151716K
3151717K use press it washers as
described next page
use press it washers as
described next page
3151719K use press it washers as
described next page
(1") 25mm  (11/4") 32mm
M8 Thread
(1") 25mm 2-part cap for thinner
material M8 Thread
(1") 25mm 2-part cap for thinner
material M8 Thread
(1") 25mm 2-part cap for thinner
material M8 Thread
5/8"
5/8"
5/8"
5/8"
315172-K use press it washers as
described next page
(1") 25mm 2-part cap for thinner
material M8 Thread 5/8"
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
6

Installation
1 Piece Cap
For Thicker and Thinner Panels
3-15-0025-K
3-15-0026-K
3-15-0027-K
3-15-0028-K
3-15-0029-K
5/8"Ø
3-15-0025-K
3-15-0026-K
3-15-0027-K
3-15-0028-K
3-15-0029-K 5/8"Ø
1. Press it washers into ⅝" diameter hole (if drilled properly the washers should snap into place in the panel hole) front and back of
panel, (back side only for thinner panels).
2. Carefully place panel in position, verify washers remain in place. Install caps through washers and panel to back hardware. Hand
tightening with a subsequent partial tool tightening is appropriate. Caps do not need to be overtightened.
Materials ¼" and Thicker Materials ⁄" and Thinner
3-15-1719-K
3-15-1720-K
M8 Threaded Rod
M8 Threaded Rod
3-15-0725
3-15-1716-K
3-15-1717-K
Materials ¼" and Thicker Materials ⁄" and Thinner
2 Piece Cap
For Thicker and Thinner Panels
1. Install hardware at substrate and M8 Threaded rod into substrate hardware (barrel or other) so it is ready to receive cap and
panel. For thinner panels place recessed white bushing onto threaded rod in preparation for panel installation.
2. Press it washers into ⅝" diameter hole (If drilled properly the washers should snap into place in the panel hole) front and back
of panel, (back side only for thinner gauge panels).
3. Carefully place panel in place, verify washers remain in place. Install caps through washers and panel to back hardware. Hand
tightening with a subsequent tool partial tightening is appropriate. Caps do not need to be overtightened.
(Varia, Chroma, Koda, Stone and 100%) (Varia only)
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
7

1" - - -
25mm(1") Countersunk Cap w/
32mm(11/4") threaded rod
315-74
¾" 25mm(1") Cap w/
32mm(11/4") threaded rod
315-29
- -
25mm(1") Countersunk Cap w/
25mm(1") threaded rod
315-739
½" 20mm Countersunk Cap w/
20mm (3/4") threaded rod
315-732
25mm(1") Cap w/
25mm(1") threaded rod
315-28
-
25mm(1") Countersunk Cap w/
20mm(3/4") threaded rod
315-736
⅜" 20mm Countersunk Cap w/
20mm (3/4") threaded rod
315-732
25mm(1") Cap w/
25mm(1") threaded rod
315-28
-
25mm(1") Countersunk Cap w/
17mm threaded rod
315-737
¼" 20mm(3/4") Cap w/
20mm(3/4") threaded rod
315-2
25mm(1") Cap w/
20mm(3/4") threaded rod
315-25
-
25mm(1") Countersunk Cap w/
10mm(3/8") threaded rod
315-738
⁄"
⁄" 20mm(3/4") Cap w/
20mm(3/4") threaded rod
315-2
25mm(1") Cap w/
17mm threaded rod
315-26
25mm(1") Cap w/
10mm(3/8") threaded rod
315-27
- - -
- -
⅛" 25mm(1") Cap w/
17mm threaded rod
315-26
- - -
Designed for:
Varia
Chroma
Struttura
Stone
Pressed Glass*
100%
Designed For:
Varia
100%
Designed for:
Varia
100%
Designed for:
Varia
Struttura
100%
Summary
1 Piece Cap Chart
Another integral part of the Versa system regardless of application is the 1-piece threaded cap. The length of threading needs
to be chosen based on the gauge of material. To select the best options for your installation, please follow the 2 steps outlined
below. Your end result will be separate part numbers for each connection.
Spanner Wrench (ST)
3-15-0782
1" Cap Threaded Rod ¾" Cap Threaded Rod ¾" Countersunk1" Countersunk
Spanner Wrench (ST)
3-15-0782
Ø 3/4"
Spanner Wrench (CS)
3-15-0744
Spanner Wrench (CS)
3-15-0744
Ø 3/4"
1
Choose
the design >
2
Select the
panel gauge
V
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
8

Low-proile thinner gauge kit
3151717K
+ 3151754
Standard thinner gauge kit
3151716K
+ 3151754
Standard thinner gauge kit
3151716K
+ 3151753
Low-proile thinner gauge kit
3151717K
+ 3151753
-
-
-
Low-proile thinner gauge kit
3151717K
+ 3151754
Standard thinner gauge kit
3151716K
+ 3151754
Standard thinner gauge kit
3151716K
+ 3151753
Low-proile thinner gauge kit
3151717K
+ 3151753
-
-
Standard thinner gauge kit
3151719K
+ 315333
Standard thinner gauge kit
3151719K
+ 315332
Low-proile thinner gauge kit
315172-K
+ 315332
Low-proile thinner gauge kit
315172-K
+ 315333
Countersunk assembly thicker gauge
3151721K
+ 3151757
Standard thinner gauge kit
3151719K
+ 3151755
Standard thinner gauge kit
3151719K
+ 315332 A
Low-proile thinner gauge kit
315172-K
+ 315332 A
Low-proile thinner gauge kit
315172-K
+ 3151755
Countersunk assembly thicker gauge
3151721K
+ 3151756
Countersunk assembly thicker gauge
3151721K
+ 3151758
Designed for:
Varia
Chroma
Struttura
Stone
100%
Designed for:
Varia
100%
Designed for:
Varia
Chroma
Struttura
Stone
100%
⁄"
⁄"
⅜"
¾"
1"
½"
⅛"
¼"
Summary
2 Pieces Cap Chart
Another integral part of the Versa system regardless of application is the 2-piece cap. The length of rod needs to be chosen based
on the gauge of material. This threaded rod is then capped using your choice of standard , low proile , counter bore , or counter-
sunk caps. To select the best options for your installation, please follow the 2 steps outlined below. Your end result will be separate
part numbers for each connection.
1" Standard 1" Low Proile 1" Counterbore
Allen Keys
Low Profile Cap Key
3-15-1704
Spanner Wrench (ST)
3-15-0782
*Pressed Glass in 5/16" and 3/4" gauges is compatible only when used with the Glass Adapter hardware, 315-68K or 315-69K
*See Versa Glass Integrator and Glass Adapter Solution Documents for more information
1
Choose
the design >
2
Select the
panel gauge
V
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
9

Solution 1
Partitions
Partitions
Oval
Blade
Slim One
Slim Two
Slim Four
Square
Bar
Beam
Block
Wall Plate
3-15-0019
3/8" Side Bracket
3-15-0787-K
3/4" Side Bracket
3-15-1540-K
4-Point Spider
3-15-0766
1-Point Spider
3-15-0768
2-Point Spider Straight
3-15-0781
Slim Post Mount
3-15-1731-K
3/4" Hinged Bracket
3-15-0830-K
2-Point Spider
3-15-0767
2-leg 3D Spider
3-15-1735-K
1-leg 3D Spider
3-15-1734-K
3/8" 45 Degree Bracket
3-15-1526-K
M8 T-Nut
3-15-0826
Bottom Plate
3-15-1736-K
Slot Cover
3-15-1732
Blade Plate Cover
3-15-1733-K
5" Oval Plate Cover
3-15-1745-K
5" Square Plate Cover
3-15-1746-K
6" Oval Plate Cover
3-15-0714-K
6" Square Plate Cover
3-15-0715-K
Slim Plate Cover
3-15-1747-K
3-15-0707-K
3-15-0712-K
Pivot Base
3-15-1744-K
Pressure Fit Assembly
3-15-0804-K
Sleeve
3-15-1741
Stando Cap and
Panel Protection
2 Piece Bracket
3-15-1752-K
16mm Duo Bracket
3-15-5001-K
5" Two Part Bottom
Plate for Concrete
3-15-6500-KC
6" for Wood
3-15-0713-KW
Square Base Plate
3-15-6502-K
Block Plate Cover
3-15-0137-K
Beam Plate Cover
3-15-0136-K
Bar Plate Cover
3-15-0138-K
See pages 6 to 9
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
10

Solution 1
Partitions Example 1
Pressure Fit Application With Side Bracket Attachments
The top mounted Pressure Fit Assembly securely mounts each proile in place, where panels can be mounted using side bracket
attachments. This pressure it system easily adapts to the environment, whether you fasten the top directly to the ceiling, or put
the rod through a drop ceiling tile while fastening the top to the substrate above. This can then be covered with the ceiling canopy
on a drop ceiling. Or, you can use an alternate option of a drop ceiling clip to attach the top of the proile. The loor plate can be
exposed or covered using the Floor Plate Cover. For temporary installations
this pressure it system does not need to be bolted to the ceiling or loor, or for
a more permanent and secure installation, the top and bottom plates
may be bolted to the ceiling and loor.
Blade
(3)
Beam
(3)or
(1)
Sleeve
3-15-1741
(8)
Slot Cover
3-15-1732
(3)
(3)
(3)
Bottom Plate
3-15-1736-K
5" Two Part Bottom
Plate for Concrete
(Requires Cover Plate)
3-15-65-KC
Square BasePlate
3-15-652-K
or
or
(20)
2 Piece Bracket
3-15-1752-K
(3)
Pressure Fit Assembly
3-15-84-K
(3)
(3)
Beam Plate Cover
3-15-136-K
Blade Plate Cover
3-15-1733-K
or
(3)
(3)
Beam Plate Cover
3-15-136-K
Blade PlateCover
3-15-1733-K
or
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
11

Solution 1
Partitions Example 2
Pressure Fit Application With Spider Attachments
(3)
Pressure Fit Assembly
3-15-0804-K
(4)
1-Point Spider
3-15-0768
(3)
(3)
(3)
Bottom Plate
3-15-1736-K
5" Two Part Bottom
Plate for Concrete
(Requires Cover Plate)
3-15-6500-KC
Square BasePlate
3-15-6502-K
or
or
(3)
(3)
Oval
3-15-0790-K
Bar
or
(2)
4-Point Spider
3-15-0766
(6)
2-Point Spider
3-15-0767
(24)
Stando Cap
(24)
M8 T-Nut
3-15-0826
(3)
(3)
Bar Plate Cover
3-15-0138-K
Oval Plate Cover
3-15-1745-K
or
See pages 6 to 9
As in Example 1, the pressure it system can be installed using dierent proiles. In this example, where the goal is to have panels
placed above other panels, spiders are being used with 2-piece caps instead of side brackets.
This allows you to conceal the proiles behind the material and have as many dierent
types of panels as desired. 4-point, 2-point and 1-point spiders are available to
add lexibility and ease of installation. The recommended height of the
partitions is dependent on the Versa Profile used, refer to the
chart on page 2 for more information.
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
12

(3)
Pivot Base
3-15-1744-K
(30)
Stando Cap
(15)
2-leg 3D Spider
3-15-1735-K
(15)
M8 T-Nut
3-15-826
(3)
(3)
(3)
Pressure Fit Assembly
3-15-84-K
Oval
3-15-79-K
Bar
or
Solution 1
Partitions Example 3
Pressure Fit Pivoting Partitions
In this installation, the Oval or Bar Profile is being used with Spiders and the Pivot Base to create pivoting partitions that can divide
or artistically complement a space. These partitions can turn to the closed position to create a separate part of a room, or can be
opened for full use of the room. It is recommended that the maximum width of pivoting partitions is 38" each. For thicker gauges
you will need more Spiders to support additional weight. The recommended height of the partitions is dependent on the Versa
Profile used, refer to the chart on page 2 for more information.
See pages 6 to 9
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
13

Solution 2
Dividers
4-Point Spider
3-15-0766
2-Point Spider
3-15-0767
Dividers
Free Standing Base
3-15-0803-K
3/8" Hinged Bracket
3-15-0831-K
3/4" Hinged Bracket
3-15-0830-K
Oval
Blade
Square
Bar
Beam
Block
3/8" 45° Bracket
3-15-1526-K
Wall Plate
Converter
3-15-0019 3/8" Side Bracket
3-15-0787-K
3/4" Side Bracket
3-15-1540-K
2 Piece Bracket
3-15-1752-K
M8 T-Nut
3-15-0826
Slot Cover
3-15-1732
Standoff Cap and
Panel Protection
1-Point Spider
3-15-0768
2-Point Spider
Straight
3-15-0781
2-leg 3D Spider
3-15-1735-K
1-leg 3D Spider
3-15-1734-K
5" Bottom Plate
3-15-1736-K
5" Two Part Base
Plate for Concrete
3-15-6500-KC
6" Two Part Base Plate
for Cantilever >72"
3-15-1941-K
6" Base Plate for Wood
3-15-0713-KW 5" Blade Plate Cover
3-15-1733-K
6" Blade Plate Cover
3-15-1940-K
6" Beam Plate Cover
3-15-1939-K
5" Square Plate Cover
3-15-1746-K
6" Square Plate Cover
3-15-0715-K
5" Oval Plate Cover
3-15-1745-K
6" Oval Plate Cover
3-15-0714-K
Slim One Plate Cover
3-15-1747-K
Slim Two Plate Cover
3-15-0707-K
Slim Four Plate Cover
3-15-1800-K
Square Base Plate
3-15-6502-K
Bar Plate Cover
3-15-0138-K
Block Plate Cover
3-15-0137-K
Beam Plate Cover
3-15-0136-K
Bar Top Cap
3-15-0141-K
Block Top Cap
3-15-0140-K
Beam Top Cap
3-15-0139-K
Oval Cap
3-15-0788-K
Square Cap
3-15-1537-K
Blade Cap
3-15-1728-K
Slim One
See pages 6 to 9
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
14

Solution 2
Dividers Example 1
Free Standing Divider With Flexible Varia Panels
With the optional Free Standing Base, the 3form Versa Divider solution can create completely free-standing applications, serving
as a movable partition or divider. When used with lexible Varia panels (1/8" gauge), the weight of the base can be used to cold
form the panel, creating undulation without heat forming. Caps cover the tops of the proiles and Slot Covers conceal the
exposed slots to create a very clean look as the Side Brackets hold the material between the proiles. It is recommended that
these free-standing partitions be no taller than 4'.
3/8" 2Piece Bracket
3-15-829
Slot Cover
3-15-1732
Oval
3-15-79-K
Bar
or
Free Standing Base
315-83K
Bar Top Cap
315-141K
Oval Cap
315-788K
or
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
15

Solution 2
Dividers Example 2
Free Standing Divider With Rigid Varia Panel
As with Example 1, the 3form Versa Divider solution can create completely free-standing applications, serving as a movable
partition or divider. Shown with clamping side brackets and 1/2" gauge Varia. Maximum 96" high side proiles. Maximum Chroma
and Varia panel size is 48" wide  93" high. Maximum glass size is 48" wide  72" high.
See Versa Glass Integrator Solution Document for more information on glass.
Slot Cover
3-15-1732
Foot For Partition
3-15-0874-K
Slim One
Blade
Beam
or
2PieceBracket
3-15-1752-K
Slim Post Mount
3-15-1731-K
Blade Cap
3-15-1728-K
Beam Top Cap
3-15-0139-K
or
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
16

XX
XX
XX
X X X X XX X X
X X XX X X
X X XX X X
Versa Horizontal Proile - 50" Length
Bar
6135
Versa Vertical Proile - 96" Length
Blade
-6-12
Beam
6127
Square
619
Block
6131
Oval
617
Blade
-6-12
Slim 2
613
Slim 1
6135
Bar
-6-135
Oval
-6-17
Block
-6-131
Square
-6-19
Beam
-6-127
Solution 2
Versa Compatibility Chart for Free Standing Dividers
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
17

Solution 2
Dividers Example 3
Floor Bolted Free Standing Divider Application
In this example, the bottom plate is bolted to the loor, which can be covered using the Bottom Plate Cover, and Slot Covers
conceal any exposed slots in the proile. The material is then suspended using Spiders with thru holes to hide the hardware behind
the materials. When this free standing divider is bolted to the loor, the height of the divider is dependent on the Versa Profile
used, refer to the chart on page 3 for more information.
(2)
(3)
(3)
(3)
(3)
(3)
(3)
Slot Cover
3-15-1732
5" Bottom Plate
3-15-1736-K
5" Two Part Base
Plate for Concrete
(Requires CoverPlate)
3-15-65-KC
or
or
Square BasePlate
3-15-652-K
6" Two Part Base Plate
for Cantilever 72"
3-15-1941-K
or
Blade
Beam
or
(40)
(3)
(3)
(3)
(3)
(3)
(3)
(20)
M8 T-Nut
3-15-826
Standoff Cap
(20)
2-leg 3D Spider
3-15-1735-K
5" Blade Plate Cover
3-15-1733-K
Beam Plate Cover
3-15-136-K
6" Beam Plate Cover
3-15-1939-K
6" Blade Plate Cover
3-15-194-K
or
or
or
Blade Cap
3-15-1728-K
Beam Top Cap
3-15-139-K
or
See pages 6 to 9
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versatm Solution Document/Installation Manual
18