3m Aqua-pure ap1610ss User manual

At a Glance:

• Premium performance progressive porosity sediment cartridge(s)

• For hot and cold water applications

• 3/4” NPT Connections

Applications:

• Sediment / Rust

• Chlorine Taste & Odor

Product Beneﬁts:

• Heavy-duty 316 stainless steel head and 304 stainless steel housing rated to 300

psi (2,069 kPa) maximum operating pressure for maximum strength and durability

• Premium performance, high efﬁciency AP110 progressive porosity depth cartridge

• Manufactured from FDA CFR-21 compliant materials

• High Flow, dual cartridge AP2610SS model for high water demand applications and

less frequent cartridge changes

• 3/4” unrestricted ﬂow design for high ﬂow rates with minimal pressure drop

• “Sure-Seal” ring nut connector with tightening tool allowing for positive cartridge

sealing

• Complete installation manual is enclosed for easy reference and simple installation

Models:

AP1610SS / AP2610SS

Stainless Steel Water Filters

Product Speciﬁcations:

Spec #

Quantity

Model No.

(Part No.)

Inlet/

Outlet

Size

Dimensions Flow

Rate

Clean Pressure

Drop

Max.

Water

Temp.

Max.

Water

Pressure

Degree of

Filtration

Std.

Replacement

Ctg. No.

Height Diameter

AP1610SS

(5592002) 3/4”

NPT

12-7/32”

(31 cm)

4-5/32”

(10.6 cm)

8 gpm

(30.3 lpm)

2 psi @ 8 gpm

(13.8 kPa @ 30 lpm) 170°F

(76.7°C)

300 psi

(2,070 kPa)

5 Micron

Nominal

AP110

AP2610SS

(5592003)

22-1/32”

(56 cm)

4-5/32”

(10.6 cm)

16 gpm

(60.6 lpm)

4 psi @ 16 gpm

(27.6 kPa @ 61 lpm) AP110 (Qty. 2)

AP1610SS AP2610SS

*Dependent upon cartridge used

a 3M company

CUNO Incorporated

400 Research Parkway

Meriden, CT 06450 U.S.A.

Toll Free: 1.800.222.7880

Worldwide: 203.237.5541

Fax: 203.238.8701

www.aquapure.com • www.cuno.com

CUNO and Aqua-Pure are trademarks of 3M Company used under license.

LITAP1610 1007

Physical Speciﬁcations:

• 3/4” NPT connections

• System is manufactured from FDA CFR-21 compliant materials

• System has a maximum operating pressure of 300 psi (2,070 kPa)

and operating temperature of 170°F (76.7°C)

* For cold water use only

WARNING: Do not use with water that is microbiologically unsafe

or of unknown quality without adequate disinfection before or

after the system. The contaminants or other substances removed

or reduced by this water ﬁlter are not necessarily in all users water.

CUNO Incorporated recommends regularly scheduled maintenance

and replacement of the ﬁlter cartridge(s) in order for the product to

perform as advertised/sold. Change the ﬁlter cartridge at least ev-

ery 6 months. Improper installation and maintenance may result

in property damage due to water leakage.

Spec #

Quantity

Model Number

Part Number

Easy Installation:

Limited Warranty:

CUNO Incorporated warrants this Product to be free from defects in material and workmanship for ten (10) years from the date of purchase. This warranty does

not cover failures resulting from abuse, misuse, alteration or damage not caused by CUNO or failure to follow installation and use instructions. If the Product is

defective CUNO will replace the Product or refund your Product purchase price. CUNO will not be liable for any indirect, special, incidental, or consequential dam-

ages arising from the use of this Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation

may not apply to you. To obtain warranty service, mail your request to Warranty Claims, CUNO Incorporated, 400 Research Parkway, Meriden, CT 06450. Proof

of purchase (original sales receipt) must accompany the warranty claim, along with a complete description of the Product, model number and alleged defect.