3One data 1200 User manual

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Model1200
Model1200
Model1200
Model1200
2-port
2-port
2-port
2-port
10/100M
10/100M
10/100M
10/100M
Media
Media
Media
Media
Converter
Converter
Converter
Converter
(SM
(SM
(SM
(SM
&
&
&
&
MM)
MM)
MM)
MM)
I
I
I
I
ntroduction
ntroduction
ntroduction
ntroduction
:
:
:
:
The Media Converter complies with IEEE802.3, IEEE802.3u,
IEEE802.3x Standards. It is designed to convert data signal between
10/100 Base-TX and 100Base-FX fast Ethernet. It supports
10/100Base-TX and 100Base-FX applications. The data signal
converted by s uch high performance media converter can be
transmitted up to 120Km maximum by fiber-optical cable. The
Converter is equipped one optic port and two RJ45 Jacks and one
external power supply receptacle. Four LED indicators are built-in
for easy diagnosing and monitoring the status of. It can be
configured automatically for Full Duplex or Half Duplex operation.
Packing
Packing
Packing
Packing
L
L
L
L
ist
ist
ist
ist
:
:
:
:
Model 1200 is shipped with following items.
1. Model1200 ×1
2. 5VDC power adapter ×1(Media converter/5VDC)
3. User manual ×1
F
F
F
F
eatures:
eatures:
eatures:
eatures:
1. Accord to IEEE802. 1 10Base-T , IEEE802.3 u 100Base-TX,
IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Power External 5VDC input
5. Plug-and-play, easy to installation
6. Can insert to 2U 19", 14 slots Rack (power external)
P
P
P
P
inout
inout
inout
inout
Configuration:
Configuration:
Configuration:
Configuration:
Power
Power
Power
Power
Model1200 adopt the power supply input is 5VDC external.
All manuals and user guides at all-guides.com
all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Ethernet(RJ45),Optical
Ethernet(RJ45),Optical
Ethernet(RJ45),Optical
Ethernet(RJ45),Optical
fiber
fiber
fiber
fiber
interface
interface
interface
interface
Optical
Optical
Optical
Optical
fiber
fiber
fiber
fiber
interface:
interface:
interface:
interface:
Optic fib er interface need use in pairs, OUT port is fiber send side ,
connect another long-range light of interface fiber receive end IN;
IN port is fiber receive side , connect long-range same fiber send
side :
Optic fib er s spent both ends mark the label (the following picture
show: A-A, B-B, can also mark another: A1-A2, B1-B2), in order to
use.
NOTE:
NOTE:
NOTE:
NOTE:
SC, ST or FC, for optic fiber interface, SM is look the same
to MM for form. For example,Model 1200 SM/SC,the optic fiber
interface(SC) is look the same to Model 1200 MM/SC.
All manuals and user guides at all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Ethernet
Ethernet
Ethernet
Ethernet
interface:
interface:
interface:
interface:
2-port Ethernet( RJ45 ) interface supports MDI/MDI-X auto
negotiation, can use straight- through cable connect PC or server,
use across-over connect cable Switch or HUB.
MDI: PIN 1, 2, 3, 6 connects opposite.
MID-X: 1 → 3 , 2 → 6 , 3 → 1 , 6 → 2
MDI/MDI-X 10Base-T/100Base-TX P IN define as follow:
Note ： “TX ±” Transfer data ± ， “RX ±” Receive data ± ， “—” None 。
MDI:
MDI:
MDI:
MDI:
MDI-X:
MDI-X:
MDI-X:
MDI-X:
PIN
MDI
MDI-X
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4、5、7、8
—
—
1
8
RJ 45
TX +
TX -
TX -
RX +
RX +
RX -
RX -
TX +
2
3
6
1
2
3
6
1
1
8
RJ 45
TX +
TX -
TX -
RX +
RX +
RX -
RX -
TX +
2
3
6
1
6
1
2
3
( TX - )
( RX +)
( RX - )
( TX +)
( TX +)
( TX - )
( RX +)
( RX - )
1 8
All manuals and user guides at all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
LED
LED
LED
LED
indications:
indications:
indications:
indications:
Specifications:
Specifications:
Specifications:
Specifications:
Standards : comply with IEEE802. 1 10Base-T , IEEE802.3 u
100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,120km(SM),
2, 5 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: 2 ×SC, 2 × ST, 2×FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125
um
LED
LED
LED
LED
STATE
STATE
STATE
STATE
INDICATION
INDICATION
INDICATION
INDICATION
FX-ACT
FX-ACT
FX-ACT
FX-ACT
(Fiber Link Port)
OFF
no link
BRIGHT
link is ok
FLASH
TX or RX activity
TP1-ADD
TP1-ADD
TP1-ADD
TP1-ADD
( Ethernet Port 1 )
OFF
no link
BRIGHT
link is ok
FAST
FLASH
transmitting or receiving at
100Mbps
SLOW
FLASH
transmitting or receiving at
10Mbps
POWER
POWER
POWER
POWER
OFF
no POWER
BRIGHT
POWER is ok
TP
TP
TP
TP
2
2
2
2
-ADD
-ADD
-ADD
-ADD
( Ethernet Port 2 )
OFF
no link
BRIGHT
link is ok
FAST
FLASH
transmitting or receiving at
100Mbps
SLOW
FLASH
transmitting or receiving at
10Mbps
All manuals and user guides at all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Muti-Mode:50/125,62.5/125um
Wavelength:850nm,1310nm,1550nm
Power supply: External 5VDC input
Dimensions: 94.0mm ×71.0mm ×26.0mm
Installation: support DIN-Rail installation
Operating temp:-10 ° C to 65 ° C
Storage temperature: -20 to 70 ° C
Operating humidity : 5% to 95% (no condensation)
Warranty: 5 years
Approvals: FCC,CE, RoHS approvals
Applications
Applications
Applications
Applications
:
:
:
:
Extending
Extending
Extending
Extending
10/100M
10/100M
10/100M
10/100M
Ethernet
Ethernet
Ethernet
Ethernet
data
data
data
data
distance
distance
distance
distance
Installation
Installation
Installation
Installation
:
:
:
:
Model1200 provides DIN-rail and wall mounting two types of
installation.
Wall
Wall
Wall
Wall
mounting
mounting
mounting
mounting
installation
installation
installation
installation
All manuals and user guides at all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
DIN-Rail
DIN-Rail
DIN-Rail
DIN-Rail
Installation
Installation
Installation
Installation
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
instructions:
instructions:
instructions:
instructions:
1. Make sure the power is connected and turned on.
2. Make sure the converter Ethernet and fiber optic cables are
connected properly.
3. Check the connections according to the connection diagram.
4. Check the LED Indication status and identify possible problems
from the Indication LED table above.
Note:
Note:
Note:
Note:
1. M ed ia C o n v e r t e r is a s e n s i t i v e e l e c t r on i c i t e m , p l e a s e d o
h a n d l e w i t h e x t r a c a r e o n d e l i v e r y , s h i ft i n g a n d h u m i d i t y .
2. T h is u n i t w i l l b e w a rr a n t y f o r 5 y e a r s .
3. W h ene v e r t he r e is a p r ob l e m r e g a r d i n g t h e q u a l i t y i ss u e w i t h i n
t h e w a rr a n t y pe r i o d , w e w i l l t a k e t h e r e s p on s i b i l i t y t o r e p a i r w i t h
f r e e .
4. A ft e r t h e w a rr an t y p e r i o d , w e w i l l c h a r g e a c c o r d i ng l y
d e pend i n g o n t h e f a u l t o r d a m a g e .
5. W h ene v e r t h e r e is a f au l t , y o u c a n c o n t a c t o u r t e c h n i c a l
s u p p o r t a f t e r y o u i d e n t i f y t h e p r o b l e m a n d t h e a l a r m .
All manuals and user guides at all-guides.com
all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Common
Common
Common
Common
Problems
Problems
Problems
Problems
:
:
:
:
1.
1.
1.
1.
PWR
PWR
PWR
PWR
power
power
power
power
supply
supply
supply
supply
indicator
indicator
indicator
indicator
lamp
lamp
lamp
lamp
not
not
not
not
lighting
lighting
lighting
lighting
Cause:
Cause:
Cause:
Cause:
1. Power supply not properly connected
2. Protector tube damaged
3. P ower input tie-line in reverse connection
4. Internal power supply circuit with failure
Solution
Solution
Solution
Solution
:
:
:
:
1. Check power switch and jack
2. Replace protector tube
3. Correct power supply line connection
4. Returned to the manufacturer for repair.
2
2
2
2
.
.
.
.
FX
FX
FX
FX
-ACT
-ACT
-ACT
-ACT
indicator
indicator
indicator
indicator
lamp
lamp
lamp
lamp
not
not
not
not
lighting
lighting
lighting
lighting
Cause:
Cause:
Cause:
Cause:
Optic fiber port link is fault.
Solution:
Solution:
Solution:
Solution:
1. Check fiber optic is link or not.
2. Check fiber optic loss is high.
3. Clean the connector of optic interface.
4. Insert the well connector in place.
5. Returned to the manufacturer for repair.
3
3
3
3
.
.
.
.
TP1(2)-ADD
TP1(2)-ADD
TP1(2)-ADD
TP1(2)-ADD
indicator
indicator
indicator
indicator
lamp
lamp
lamp
lamp
not
not
not
not
lighting
lighting
lighting
lighting
Cause:
Cause:
Cause:
Cause:
Ethernet port link is fault.
Solution:
Solution:
Solution:
Solution:
1. Check Ethernet(RJ45) line is link or not.
2. Check Ethernet(RJ45) port is loose.
3. Check the rate of selected media converter
4. Check the rate of Network.
5. Returned to the manufacturer for repair.
4
4
4
4
.
.
.
.
Network
Network
Network
Network
packet
packet
packet
packet
loss
loss
loss
loss
Solution:
Solution:
Solution:
Solution:
1. Check Ethernet rate or full/half duplex is matched or not.
2. Ethernet(RJ45) port is loose contact, or optic port is loose
contact and soiled .
3. Ethernet cable not comply with Ethernet standard.
All manuals and user guides at all-guides.com

Your Serial and Data Communications Expert
Shen zhen 3onedata Technology Co.,Ltd
Certifications:
Certifications:
Certifications:
Certifications:
Shenzhen
Shenzhen
Shenzhen
Shenzhen
3onedata
3onedata
3onedata
3onedata
Technology
Technology
Technology
Technology
Co.,Ltd
Co.,Ltd
Co.,Ltd
Co.,Ltd
Tel: [phone] Fax: [phone]
www.3onedata.com
All manuals and user guides at all-guides.com