3One data IMC100-2T1F-1D User manual

IMC100-2T1F-1D
Industrial Media Converter
User Manual
Version 01
Issue Date: 2019-01-28
Industrial Ethernet Communication Solutions Expert 3onedata Co., Ltd.

Copyright © 2019 3onedata Co., Ltd. All rights reserved.
No company or individual is allowed to duplicate or transmit this manual in any forms without written
permission issued by 3onedata Co., Ltd.
Trademark statement
, and are the registered trademark owned by
3onedata Co., Ltd. And other trademarks mentioned in this manual belong to their corresponding
companies.
Notes
Purchased product, service or features should be constrained by 3ondedata commercial contracts and
clauses. The whole or part product, service or features described in this document may beyond
purchasing or using range. 3onedata won't make any statement or warranty for this document content
unless any other appointment exists.
Due to product version upgrading or other reason, this document content will be upgraded periodically.
Unless other appointment exists, this document only for usage guide, all statement, information and
suggestion in this document won't constitute any warranty.

3onedata Co., Ltd.
Headquarter address:
3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road,
Nanshan District, Shenzhen, 518108, China
Technology support:
[e-mail]
Service hotline:
[phone]
E-mail:
[e-mail]
Fax:
[phone]
Website:
http://www.3onedata.com

User Manual
3onedata proprietary and confidential 1
Copyright © 3onedata Co., Ltd.
Preface
Managed Industrial Ethernet Switch User Manual has introduced this series of
switches:
Product feature
Network management method
Network management relative principle overview
Readers
This manual mainly suits for engineers as follows:
Network administrator responsible for network configuration and maintenance
On-site technical support and maintenance staff
Hardware engineer
Text Format Convention
Format
Description
“”
Words with "" represent the interface words. e.g.: "The port
number".
>
Multi-level path is separated by ">". Such as opening the
local connection path description: Open "Control Panel>
Network Connection> Local Area Connection".
Light Blue Font
Represent the words click to achieve hyperlink. Font color as:
"Light blue".
About This Chapter
The "About This Chapter" section provides links to each
section and corresponding principles / operating chapters in
this chapter.
Icon Convention
Format
Description

User Manual
3onedata proprietary and confidential 2
Copyright © 3onedata Co., Ltd.
Format
Description
Reminder the announcements in the operation, improper
operation may result in data loss or equipment damage.
Pay attention to the notes on the mark, improper operation
may cause personal injury.
Make a necessary supplementary instruction for operation
description.
Configuration, operation, or tips for device usage.
Pay attention to the operation or information to ensure
success device configuration or normal working.
Revision Record
Version NO.
Revision Date
Revision Description
01
2019-01-18
Product release

User Manual
3onedata proprietary and confidential I
Copyright © 3onedata Co., Ltd.
Content
PREFACE......................................................................................................................................... 1
CONTENT......................................................................................................................................... I
1LOG IN THE WEB INTERFACE............................................................................................. 1
1.1 WEB BROWSING SYSTEM REQUIREMENTS .................................................................. 1
1.2 SETTING IPADDRESS OF PC....................................................................................... 1
1.3 LOG IN THE WEB CONFIGURATION INTERFACE ............................................................. 3
2SYSTEM STATUS.................................................................................................................... 4
2.1 BASE INFOR ............................................................................................................. 4
2.2 PORT INFOR ............................................................................................................. 6
3SYSTEM CONFIG................................................................................................................... 8
3.1 PORT SETTING.......................................................................................................... 8
3.2 VLAN....................................................................................................................10
3.3 COM SETTINGS.......................................................................................................10
3.4 IP FILTERING...........................................................................................................13
3.5 MAC FILTERING......................................................................................................14
3.6 RELAY WARNING.....................................................................................................16
3.7 STORM ...................................................................................................................17
4SYSTEM TOOLS ................................................................................................................... 19
4.1 SYSTEM FILE UPDATE ..............................................................................................19
4.2 LOGIN SETTINGS .....................................................................................................20
5FAQ........................................................................................................................................ 22
5.1 SIGN IN PROBLEMS ..................................................................................................22
5.2 CONFIGURATION PROBLEM.......................................................................................22
5.3 INDICATOR PROBLEM ...............................................................................................23
6MAINTENANCEAND SERVICE.......................................................................................... 25
6.1 INTERNET SERVICE ..................................................................................................25
6.2 SERVICE HOTLINE....................................................................................................25
6.3 PRODUCT REPAIR OR REPLACEMENT..........................................................................26

User Manual
3onedata proprietary and confidential 1
Copyright © 3onedata Co., Ltd.
1Log in the Web Interface
1.1 WEB Browsing System Requirements
While using managed industrial Ethernet switches, the system should meet the
following conditions.
Hardware and Software
System Requirements
CPU
Above Pentium 586
Memory
Above 128MB
Resolution
Above 1024x768
Color
Above 256 color
Browser
Above Internet Explorer 6.0
Operating System
Windows XP
Windows 7
1.2 Setting IP Address of PC
The switch default management as follows:
IP Setting
Default Value
IPAddress
192.168.1.254
Subnet Mask
255.255.255.0
While configuring the switch via Web:
Before remote configuration, please make sure the route between computer and

User Manual
3onedata proprietary and confidential 2
Copyright © 3onedata Co., Ltd.
switch is reachable.
Before local configuration, please make sure the computer IP address is on the
same subnet as the one of switch.
Notes:
While first configuring the switch, if it is a local configuration mode, please make sure
that the network segment of current PC is 1.
E.g.: Assume that the IP address of the current PC is 192.168.5.60, change the
network segment "5" of the IP address to "1".
Operation Steps
Amendment steps as follows:
Open "Control Panel > Network Connection> Local Area Connection> Properties>
Step 1
Internet Protocol Version 4 (TCP / IPv4)> Properties".
Change the selected "5" in red frame of the picture below to "1".Step 2
Click “OK”, IP address modifies successfully.Step 3
End.Step 4
In windows system, if user adopts the advanced configuration function of IP address and
accesses the switch device via setting IP dummy address, the following managed functions
can't be achieved: IEEE 802.1x polling.

User Manual
3onedata proprietary and confidential 3
Copyright © 3onedata Co., Ltd.
1.3 Log in the Web Configuration Interface
Operation Steps
Login in the web configuration interface as follow:
Run the computer browser.Step 1
On the browser's address bar, type in the switch addresses "http://192.168.1.254 ".Step 2
Click the “Enter” key.Step 3
Pop-up a window as the figure below, enter the user name and password on the loginStep 4
window.
Notes:
The default username and password are “admin”, please strictly distinguish capital and
small letter while entering.
Default username and password have the administrator privileges.
WebServer will provide 3 times opportunities to enter username and password. If enter
the error information for 3 times, the browser will display a "Access denied" to reject
access message. Refresh the page and try again.
Click "OK".Step 5
End.Step 6
After login in successfully, user can configure relative parameters and information
according to demands.
Notes:
After login in the device, modify the switch IP address for usage convenience.

User Manual
3onedata proprietary and confidential 4
Copyright © 3onedata Co., Ltd.
2System Status
2.1 Base Infor
Function Description
On the “Basic Infor”page, user can check and set device name and description,
check information such as hardware version, firmware version and MAC address, etc.,
as well as network settings.
Operation Path
Open in order: "Main Menu > System Config > System Information".
Interface Description 1：Basic Infor
Basic Infor interface as follows:
The main element configuration description of Basic Infor interface:
Interface Element
Description
Name
The device name.
Note:
This item can be modified and input up to 30 characters.

User Manual
3onedata proprietary and confidential 5
Copyright © 3onedata Co., Ltd.
Interface Element
Description
Description
The device description.
Note:
This item can be modified and input up to 30 characters.
Hardware Ver
Device hardware version.
Firmware Ver
Device firmware version.
MAC Address
Device MAC address.
Interface Description 2：Network Set
Network Set interface as follows:
Main elements configuration description of Network Set interface:
Interface Elements
Description
Use the following IP
address
It represents that enabling manually configured IP
address, netmask and gateway address.
Automatically obtain
DNS server address
It represents that enabling the system automatical
acquisition for the device IP address.
IPAddress
Configure IP address of the device.
Notes:
Default configured IP address is 192.168.1.254.
Subnet Mask
Configure subnet mask of the device.

User Manual
3onedata proprietary and confidential 6
Copyright © 3onedata Co., Ltd.
Interface Elements
Description
Notes:
Default configured subnet mask is 255.255.255.0.
Gateway
Configure gateway address of the device.
Notes:
Default configured gateway address is 192.168.1.1.
Use the following DNS
server address
Configure the acquisition form of DNS server address as
manual configuration.
Notes:
Default configured DNS server address is 202.96.134.133.
Automatically obtain
DNS server address
Configure the acquisition form of DNS server address as
automatic acquisition.
Notes:
When IP address is manual configuration, this option becomes
gray and is not optional.
DNS Server
Configure DNS server address.
2.2 Port Infor
Function Description
On the “Port Information” page, user can check port number, port mode, connection
status, speed/duplex and flow control, etc.
Operation Path
Open in order: "Main Menu > System Config > Port Infor".
Interface Description
Port Infor interface as follows:
The main element configuration description of Port Infor interface:
Interface Element
Description
Port
Display the device port number.

User Manual
3onedata proprietary and confidential 7
Copyright © 3onedata Co., Ltd.
Interface Element
Description
FX/TX
Support two kinds of interface types:
Copper port;
Fiber port.
Port State
Support two kinds of Port State:
Enable
Disable
Link State
Support two kinds of Link State:
Link
UN-link
Rate/duplex
Rate/duplex：
Auto
10M half-duplex
10M full-duplex
100M half-duplex
100M full-duplex
Note :
When the speed/duplex is self-adaption mode, the port would adapt
to port speed/duplex mode automatically.
Flow Control
Support two kinds of Flow Control State:
Enable
Disable

User Manual
3onedata proprietary and confidential 8
Copyright © 3onedata Co., Ltd.
3System Config
3.1 Port Setting
Function Description
The “Port Setting”page mainly includes:
Check port type: copper port or fiber port
Port enablement
Set speed/duplex mode
Flow control
Jumbo frame status
The speed/duplex and flow control aimed at this port only works when the port is
enabled.
The speed and duplex would be acquired via automatic negotiation when choosing
automatic negotiation.
The port status doesn’t support disabling two copper ports at the same time.
Operation Path
Open in order: "Main Menu > System Config > Port Setting".
Interface Description
Port setting interface as follows:

User Manual
3onedata proprietary and confidential 9
Copyright © 3onedata Co., Ltd.
The main element configuration description of port setting interface:
Interface Element
Description
Port
Display the device port number.
Type
Support two kinds of interface types:
Copper port;
Fiber port.
Port State:
Support two kinds of Port State:
Enable
Disable
Note:
When the port state is enable, it means this port is enabled,
which is no data forwarding, and other options of this port
would gray out and be unable to choose.
Speed / Duplex
Click the drop-down list of “Speed/Duplex”to choose port
speed/duplex mode.
Auto
10M half-duplex
10M full-duplex
100M half-duplex
100M full-duplex
Note:
When the speed/duplex is “Auto”, the port would adapt to port
speed/duplex automatically.
Flow Control
Support two kinds of Flow Control State:
Enable
Disable
Jumbo Frame
Support two kinds of Jumbo Frame State:
Enable
Disable

User Manual
3onedata proprietary and confidential 10
Copyright © 3onedata Co., Ltd.
3.2 VLAN
Function Description
On the “VLAN”page, user can implement one-click VLAN enablement.
Operation Path
Open in order: "Main Menu > System Config > Vlan".
Interface Description：VLAN
VLAN interface as follows:
The main element configuration description of Vlan interface:
Interface Element
Description
VLAN Config
VLAN Config column
VLAN
Support two kinds of State:
Enable
Disable
Notes:
Enable Vlan fiber port can communicate with copper port
mutually, but two copper ports can't communicate with each
other: disable: two ports can communicate with each other.
3.3 COM Settings
Function Description
On the page of "COM Settings", user can implement serial port parameter
configuration and work mode configuration.
Operation Path
Open in order: " Main Menu > System Config > COM Settings".

User Manual
3onedata proprietary and confidential 11
Copyright © 3onedata Co., Ltd.
Interface Description
COM settings interface as follows:
Main elements configuration description of COM settings interface:
Interface Element
Description
Serial port
Parameter config
Serial port Parameter config column
Baud Rate(bps)
Select baud rate of corresponding serial number. Options
include:
600/1200/2400/4800/9600/19200/38400/57600/115200
Check Bit
Select parity bits of corresponding serial number. Options
include:
None;
Odd;
Even.
Serial Port data
byte(bytes)
The length of serial port data frame. Its value range is 1~1024
Data Bits (bits)
Select data bits of corresponding serial number. Options
include:
7 bits;
8 bits.

User Manual
3onedata proprietary and confidential 12
Copyright © 3onedata Co., Ltd.
Interface Element
Description
Stop Bits (bits)
Select stop bits of corresponding serial number. Options
include:
1bits;
2 bits.
Interval (ms)
Interval time of serial data to Ethernet data, value range is
1-500ms.
COM Mode
It's decided by software and hardware, there are RS232,
RS485, RS422 three modes.
Work Mode
Settings
Work Mode Settings Column
Sessions
1-4, each serial port of serial server supports 1-4 sessions.
Session refers to the process serial server transmits data
received from serial port to Ethernet via socket connection.
Work Type
Choose the work type of serial port. Options are:
TCP Server
TCPClient
UDP
TcpAuto
Local Port
1-65535, it refers to TCP port that is provided by serial server
and can be connected by other TCP/IP nodes. The port is
connected to relative serial ports of serial server. System will
automatically distribute local port number when it's "0", fixed
local port number will be used when it's not "0".
TargetAddress
IP address or domain name address to be connected to serial
server, both can be corresponding to the host address in
Internet.
Target Port
1-65535, TCP port number to be connected to serial port.
LinkMode
Choose the link mode of serial port. Options are:
Link: it means this device would connect when it is
powered on. It would reconnect immediately even it is
disconnected;
Data Trigger: it means the corresponding port of this
device would connect once it receives data.
DisconTimeOut
If no activity happens within the specified time, the system
would send connection detection message to check whether
the connection is valid. If it has sent successive probe packet

User Manual
3onedata proprietary and confidential 13
Copyright © 3onedata Co., Ltd.
Interface Element
Description
for 3 times and receive no reply packet from the other side, it
would assume that the other side has lost connection and
close communication connection proactively. The value range
of keep-alive connection is 0~65535
Note:
If the keep-alive connection is set to “0”, it means this function is
disabled.
RealCom
Choose whether to turn on RealCom function. Options are:
Off
On
3.4 IP Filtering
Function Description
On the “IP Filtering”page, user can limit the host IP address and subnet mask that
user wants to access or connect via setting access rule.
Operation Path
Open in order: “Main Menu > Safety Management > IP Filter”.
Interface Description
IP filter interface as follows:

User Manual
3onedata proprietary and confidential 14
Copyright © 3onedata Co., Ltd.
The main element configuration description of IP filter interface:
Interface Element
Description
IP Filtering
Disable or enable IP address filtering rule.
Filtering Rule
Set access permission for other IP address to access this
system outside of filtering rule 1～10.
Num
Display the number of IP address filtering rules.
state
Enable and disable filtering rule.
Access
Permission
Set access permission, options are:
Allow: allow to access the IP address and subnet mask
that user has set.
Forbidden: forbid to access the IP address and subnet
mask that user has set.
IP Address
Set decimal IP address in filtering rules, for example
“192.168.1.61”.
Subnet Mask
Set decimal subnet mask in filtering rules, for example
“255.255.255.0”.
3.5 MACFiltering
Function Description