Aaeon FSB-866G User manual

Full-size CPU Card FSB-866G
FSB-866G
Intel®Pentium®4/Celeron®-D
PICMG, Full-size CPU Card
With DDR, Ethernet,
CompactFlash
™
FSB-866G Rev. A Manual 1st Ed.
Aug. 2005

Full-size CPU Card FSB-866G
i
Copyright Notice
This document is copyrighted, 2005. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Full-size CPU Card FSB-866G
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™is a trademark of the Compact Flash
Association.
 Intel®, Pentium®4, and Celeron®D are trademarks of Intel®
Corporation.
 Microsoft Windows®is a registered trademark of Microsoft Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.
Please be notified that all other products’ name or trademarks
not be mentioned above are properties of their respective
owners.

Full-size CPU Card FSB-866G
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 FSB-866G CPU Card
• 1 Floppy Cable
• 1 ATA-100 Cable
• 1 USB Cable
• 1 Keyboard Cable
• 1 Serial + Parallel Cable
• 1 Serial Cable
• 1 ATX Cable
• 4 Serial ATA Cable
• 1 CPU cooler. Fan for LGA 775 Pentium®4
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Full-size CPU Card FSB-866G
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Feature......................................................................1-4
1.3 Specification..............................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-4
2.4 List of Jumpers..........................................................2-5
2.5 List of Connectors .....................................................2-6
2.6 Setting Jumpers ........................................................2-8
2.7 Clear CMOS (JP1) ....................................................2-9
2.8 Front panel Connector (FP1) ....................................2-9
2.9 Front panel Connector (FP2) ....................................2-9
2.10 RS-232 Serial Port Connector (COM1)...................2-10
2.11 RS-232/422/485 Serial Port Connector (COM2).....2-10
2.12 IrDA Connector (IR1)...............................................2-10
2.13 LPT Port Connector (LPT1) ....................................2-11
2.14 USB Connector (USB1~3) ......................................2-11
2.15 Fan Connector (FAN1)............................................2-12
2.16 ATX Power Control Connector (CN1).....................2-12
2.17 LAN LED Connector (CN2, CN4)............................2-12

Full-size CPU Card FSB-866G
v
2.18 AC97 Connector (CN6)...........................................2-12
2.19 PS/2 Keyboard & Mouse Connector (CN7) ............2-13
2.20 Internal Keyboard Connector (CN8)........................ 2-13
2.21 PCI Express Connector (CN9) ..............................2-13
Chapter 3 CPU, Heatsink and Fan Installation
3.1 CPU Installation and motherboard handling.............3-2
Chapter 4 Award BIOS Setup
4.1 System Test and Initialization. ..................................4-2
4.2 Award BIOS Setup.................................................... 4-3
Chapter 5 Driver Installation
5.1 Installation.................................................................5-3
Appendix A I/O Information
A.1 I/O Address Map.................................................. A-2
A.2 1st MB Memory Address Map ................................A-3
A.3 IRQ Mapping Chart................................................A-4
A.4 DMA Channel Assignments...................................A-5
Appendix B Programming The Watchdog Timer
B.1 Programming .........................................................B-2
B.2 W83627EHG Watchdog Timer Initial Program......B-6

Full-size CPU Card FSB-866G
Chapter1GeneralInformation 1- 1
General
Chapter
1
Information

Full-size CPU Card FSB-866G
Chapter 1 General Information 1 - 2
1.1 Introduction
The FSB-866G utilizes Intel®LGA 775 Pentium®4 CPUs with high
CPU core frequencies up to 3.8GHz with the Front Side Bus (FSB)
running at 533 to 800MHz. Moreover, this model supports dual
channel DDR memory (DDR333/400) providing a maximum
capacity up to 2GB. The VGA controller of FSB-866G is an
integrated GMA900 2D/3D Graphics Accelerator inside the Intel
915GV chipset which enhances VGA performance capability, with a
core frequency up to 333MHz. The chipset is in Intel’s embedded
roadmap that helps ensure this model’s continued production.
In addition to the powerful computing engine, the FSB-866G comes
with seven USB 2.0 ports, one Keyboard and Mouse connector,
one standard FDD port, one IrDA header, CompactFlash™Type II
socket and Ultra ATA100 & SATA channels. This full-function
design makes the FSB-866G a cost-effective industrial CPU card,
ideal for system integrators.
The FSB-866G is also equipped with a PCI-Express LAN control IC,
Marvell 88E8036/88E8053, for supporting 2 10/100 Mb or
full-speed Giga LANs. This flexible feature provides networking
access abilities for high-speed applications such as gateway, VPN,
and Mini-server.

Full-size CPU Card FSB-866G
Chapter 1 General Information 1 - 3
The AAEON FSB-866G full-size CPU card is designed to fulfill the
requirements of tough applications that demand high speed and
stable computing performance. We strongly recommend you to
adopt this leading-edge model – high performance FSB-866G as
one of your integration solutions.

Full-size CPU Card FSB-866G
Chapter 1 General Information 1 - 4
1.2 Features
• Support Intel®Pentium®4 / Celeron®-D CPU up to
3.8GHz
• DDR 333/400 memory support up to 2GB
• Integrated GMA900 2D/3D Graphics Accelerator,
VGA supports
• Integrated AC-97 Codec Audio (Daughter Board
optional)
• 2 PCI-express Connectors Can Support 2 Full-speed
Gigabit LANs
• Supports 4 Full-speed Gigabit LANs (optional)
• Supports Ultra ATA100 & SATA & CompactFlashTM
Type-II Storage
• 4 SATA Connectors support 4 SATA devices
• 1 IDE Slot supports 2 IDE devices
• Adding ITE8211 up can support 3 IDE slots (optional)
• 7 USB2.0/ 1 RS-232, 1 RS-232/422/485/ 1 Parallel/ 1
IrDA Port
• Watchdog Function 1~255 sec.

Full-size CPU Card FSB-866G
Chapter 1 General Information 1 - 5
1.3 Specification
System
 CPU: Support Intel®LGA 755
Pentium®4 and Celeron®-D
Processors up to 3.8 GHz
(533/800MHz FSB)
 Chipset: Intel®915GV + Intel®
82801FB/FR (ICH6/ICH6R)
 Ethernet: PCI Express 10/100Mb or
10/100/1000Mb LAN
optional, RJ-45 x 2 Marvell
88E8036/88E8053
controller
 System Memory: 184-pin 2.5V DDR DIMM
Socket x 2, total up to 2GB
Support Dual Channel DDR
memory (DDR 333/400)
 BIOS: Award Plug & Play FWH
BIOS – 4Mb ROM
 Watchdog Timer: 1~255 step, can be set with
software on Super I/O
 SSD: Supports CompactFlash™
type II connector, USB to
IDE

Full-size CPU Card FSB-866G
Chapter 1 General Information 1 - 6
 Expansion Interface: ISA/ PCI/ PCI Express
Connector (DF13-30P)
 Battery: Lithium battery
 Power Supply Voltage: +12V ATX, other supply from
Backplane
 VGA Controller: Integrated GMA 900 on
Intel®915GV, Core
frequency up to 333MHz
 Audio (Daughter board):Realtek ALC655 AC97
Codec, MIC-in/ Line-in/
Line-out/ CD-IN
 IDE Interface: ATA-100 x 1 channel
(Support two ATAPI
devices); SATA-150 x 4
(Support four SATA devices)
 Universal Serial Bus: USB 2.0 Port x 7; 5 x 2 pin
header for internal x 3;
Type-A connector onboard x
1
 ISA Interface: PCI to ISA Bridge Used
 IR Interface: Supports IrDA header x 1
 RTC: Internal RTC
 Operation Temp.: 32°F~140°F (0°C ~60°C)

Full-size CPU Card FSB-866G
Chapter 1 General Information 1 - 7
I/O
 FDD Interface: Standard FDD port x 1
(supports up to 1 floppy
device)
 Serial Ports: Two COM ports: (Internal
pin header, external D-sub
x2)
COM 1: RS-232
COM 2: RS-232/422/485
 Parallel Port: Supports SPP/EPP/ECP
mode
 Keyboard & Mouse connector:
Mini-DIN for PS/2 Keyboard
and mouse connector x 1;
Internal keyboard pin
header x 1
 IrDA: IrDA Tx/Rx header x 1
 USB Three 5 x 2 pin headers
(support 7 USB 2.0 ports)

Full-size CPU Card FSB-866G
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Chapter
2
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of user manual. For othe
r
chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007866G10 Printed in Taiwan Aug 2005

Full-size CPU Card FSB-866G
Chapter 2 Quick Installation Guide 2 - 2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Full-size CPU Card FSB-866G
Chapter2QuickInstallationGuide2 - 3
2.2 Location of Connectors and Jumpers
Component Side

Full-size CPU Card FSB-866GFull-size CPU Card FSB-866G
Chapter 2 Quick Installation Guide 2 - 4
2.3 Mechanical Drawing2.3 Mechanical Drawing
Component SideComponent Side
Chapter 2 Quick Installation Guide 2 - 4

Full-size CPU Card FSB-866G
Chapter2QuickInstallationGuide2 - 5
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Jumpers
Label Function
JP1 Clear CMOS

Full-size CPU Card FSB-866G
Chapter 2 Quick Installation Guide 2 - 6
2.5 List of Connectors
The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Connectors
Label Function
FP1 Front Panel Connector 1
FP2 Front Panel Connector 2
ATX1 ATX Power_12V Connector
ATX2 ATX Power Connector
VGA1 VGA Display Connector
FDD1 Floppy Connector
IDE1~3 EIDE Connector
SATA1~4 Serial ATA Connector
CFD1 Compact Flash Slot
COM1 RS-232 Serial Port Connector
COM2 RS-232/422/485 Serial Port Connector
IR1 IrDA Connector
LPT1 LPT Port Connector
USB1~3 USB Connector
USB4 USB Connector
LAN1 10/100 or 100/1000 Base-Tx Ethernet
Connector
LAN2 10/100 or 100/1000 Base-Tx Ethernet
Connector
DIMM1~2 DIMM Slot

Full-size CPU Card FSB-866G
Chapter2QuickInstallationGuide2 - 7
FAN1 Fan Connector
CN1 ATX Power Control Connector
CN6 AC97 Connector
CN7 PS2 Keyboard/Mouse Connector
CN8 Internal Keyboard Connector
CN2 LAN 1 Active LED Connector
CN4 LAN 2 Active LED Connector
CN9 PCI Express x1 Connector