Aaeon HSB-835A User manual

Half-size CPU Card HSB-835A
HSB-835A
Intel®Pentium®4 Processor
Half-size CPU Card
With DDR, Ethernet,
CompactFlash™& SATA
HSB-835A Rev. A Manual 1st Ed.
Jan. 2005

Half-size CPU Card HSB-835A
i
Copyright Notice
This document is copyrighted, 2005. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material inthis document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Half-size CPU Card HSB-835A
ii
Acknowledgments
All other products’name or trademarks are properties of their
respective owners.
lAward is a trademark of Award Software International, Inc.
lCompactFlash™is a trademark of the Compact Flash
Association.
lIntel®,Pentium®M, and Celeron®M are trademarks of Intel®
Corporation.
lMicrosoft Windows®is a registered trademark of Microsoft Corp.
lITE is a trademark of Integrated Technology Express, Inc.
lIBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
lSoundBlaster is a trademark of Creative Labs, Inc.

Half-size CPU Card HSB-835A
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
•1HSB-835A CPU Card
•1Floppy Cable
•1ATA-100 Cable
•1USB Cable
•1Keyboard Cable
•1Serial + Parallel Cable
•1Serial Cable
•1ATX Cable
•1Quick Installation Guide
•1CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Half-size CPU Card HSB-835A
iv
Contents
Chapter 1 General Information
1.1Introduction.............................................................1-2
1.2Feature ...................................................................1-4
1.3Specification............................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precaution....................................................2-2
2.2 Location of Connectors and Jumpers.......................2-3
2.3 Mechanical Drawing................................................2-5
2.4 List of Jumpers........................................................2-7
2.5 List of Connectors ...................................................2-8
2.6 Setting Jumpers......................................................2-9
2.7 Clear CMOS (JP1) ..................................................2-10
2.8Front panel Connector (FP1)...................................2-10
2.9Front panel Connector (FP2)...................................2-10
2.10 RS-232/422/485 Serial Port Connector (COM1).....2-11
2.11 RS-232 Serial Port Connector (COM2)..................2-11
2.12 IrDA Connector (IR1).............................................2-11
2.13LPT Port Connector (LPT1)...................................2-12
2.14USB Connector (USB1~2).....................................2-12
2.15Fan Connector (FAN1)..........................................2-13
2.16ATX Power Control Connector (CN1) ....................2-13
2.17 LAN LED Connector (CN2)....................................2-13

Half-size CPU Card HSB-835A
v
2.18 AC97 Connector (CN3)..........................................2-13
2.19 PS/2 Keyboard & Mouse Connector (CN4)............2-14
2.20 Internal Keyboard Connector (CN5).......................2-14
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization..................................3-2
3.2 Award BIOS Setup..................................................3-3
Chapter 4 Driver Installation
4.1 Installations.............................................................4-3
Appendix A I/O Information
A.1 I/O Address Map................................................. A-2
A.2 1st MB Memory Address Map.............................. A-3
A.3 IRQ Mapping Chart............................................. A-4
A.4 DMA Channel Assignments ................................ A-5
Appendix B Programming The Watchdog Timer
B.1 Programming...................................................... B-2
B.2 W83627HF Watchdog Timer Initial Program........ B-7

Half-size CPU Card HSB-835A
Chapter 1 General Information 1-1
General
Information
Chapter
1

Half-size CPU Card HSB-835A
Chapter 1 General Information 1 -2
1.1 Introduction
Introducing AAEON’s new HSB-835A, powered by Intel®
Pentium®4/Prescott processor, half-size form factor single board
computer (SBC) with an onboard VGA, 10/100/1000Mb LAN
optional and seven USB 2.0 ports.
HSB-835A successfully deployed Intel®most advanced 82865G
chipset, which supports high CPU frequency up to 3.2 GHz with
front side bus running at 400/533/800MHz. HSB-835A supports
Intel®Hyper-Threading Technology gives you the best overall
Pentium®4/Prescott processor performance available. HSB-835A
also provides high memory capacity up to 2GB DDR DRAM (DDR
200/266/333/400) and support Dual-channel (128 bits wide) DDR
memory interface.
In addition to its powerful computing engine, the full functional
design of the board includes features such as i82865GVon-chip
integrated 2D/3D graphics engine, built-in USB 2.0 and on board
CompactFlash™Type I socket. HSB-835A delivers super graphic
performance without additional cost on integrated Intel®82865GV
chipset, and provides unique Intel®Extreme Graphics architecture
to maximize VGA performance capability.

Half-size CPU Card HSB-835A
Chapter 1 General Information 1 -3
Seven USB 2.0 ports provide an expandable, Plug and Play serial
interface that ensures a standard low-cost connection for peripheral
devices. Industrial applications will benefit from the seven USB 2.0
by three pin-headers and one Type A connector onboard, offering
480Mbps high-speed efficiency and value without compromising
performance.
Moreover, HSB-835A is also equipped with Intel®Ethernet
controllers. One of these provides superior 1 GB Mbps networking
access ability for high speed networking applications such as
gateway, VPN, Mini server.
In short, this product is a versatile Pentium®4/ Prescott compact
board with the best cost-performance for CTI, networking and
mini-server markets.

Half-size CPU Card HSB-835A
Chapter 1 General Information 1 -4
1.2Feature
•Supports Intel®Pentium®4 CPU up to 3.2GHz
(Prescott CPU)
•Integrates AC97 Codec Audio (Daughter Board
optional)
•Supports Ultra ATA100 & SATA & CompactFlash™
Type I Storage
•Supports 10/100/1000Base-T Ethernet port x1
(10/100& GbE Optional)
•Supports 7 USB 2.0 Ports
•Supports RS-232 x 1, RS-232/422/485 x 1
•Supports 1 parallel port
•Supports 1 IrDA port
•Integrates AGP 8X 2D/3D Graphics Accelerator,
VGA support
•Supports DDR400 Memory up to 2GB
•Watchdog Function 1~255 sec.

Half-size CPU Card HSB-835A
Chapter 1 General Information 1 -5
1.3 Specification
System
lCPU: Supports Intel®Pentium®4
and Celeron®processors up
to 3.2 GHz (400/533/
800 MHz FSB)
lChipset: Intel®865G + Intel®
82801EB/ER (ICH5/ICH5R)
lI/O Chipset:Winbond W83627HF
lEthernet:10/100Mb or
10/100/1000Mb LAN
optional, RJ-45 x 1, Intel®
82562EZ / 82547EI
controller
lSystem Memory:184 pins 2.5V DDR DIMM
Socket x 2, total up to 2GB,
supports dual channel DDR
memory (DDR266/333/400)
lBIOS:Award Plug & Play
Firmware Hub BIOS –
4Mb ROM
lWatchdog Timer:1~255 step, can be set with
software on Super I/O
lCompactFlash: Supports CFD Type I

Half-size CPU Card HSB-835A
Chapter 1 General Information 1 -6
controller
lExpansion Interface:APCI interface
lPower Supply Voltage:+12V ATX, other supply from
Backplane
lVGA Controller: Integrated on Intel®865G,
AGP 8X, Core frequency up
to 266MHz
lAudio (Daughter board):Realtek ALC655 AC97
(Optional) Codec, MIC-in/Line-in
/Line-out/CD-in
lIDE Interface: ATA-100 x 1channel
(Supports two ATAPI
devices) SATA-150 x 2
(Supportstwo SATA devices,
Raid function optional)
lUniversal Serial Bus: USB 2.0 Port x 7,
dual 5 x 2 pin headersfor
internal, Type-A connector
onboard x 3
lIR Interface: SupportsIrDA header x 1
lRTC: Internal RTC
lPower Supply Request: ATX12V, other from
Backplanes
lOperation Temp: 0℃~60℃

Half-size CPU Card HSB-835A
Chapter 1 General Information 1 -7
I/O
lIDE Interface:ATA-100 x 1 channel
(support 2 ATAPI devices)
lFDD Interface: Standard Floppy Disk Drive
port x 1 (supportsup to 2
floppy devices)
lSerial Ports: Two COM ports: (Internal
pin header, external D-sub x
2)
COM 1: RS-232/422/485
COM 2: RS-232
lParallel Port: SupportsSPP/EPP/ECP
mode
lKB & Mouse connector: Mini-DIN for PS/2 keyboard
and mouse connector x 1,
Internal keyboard pin
header x 1
lIrDA: IrDA Tx/Rx header x 1
lUSB Dual 5 x 2 pin headers for
internal, supports7 USB 2.0
ports

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -1
Quick
Installation
Guide
Chapter
2
Part No. 2007835A10Printed in Taiwan Jan.2005
Notice:
The Quick Installation Guide is derived
from
Chapter 2 of user manual. For other
chapters and
further installation
instructions
, please refer to the user
manual CD-ROM that ca
me with the
product.

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -2
2.1 Safety Precaution
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -3
2.2Location of Connectors and Jumpers
Component Side

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -4
Solder Side

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -5
2.3 Mechanical Drawing
Component Side

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -6
Solder Side

Half-size CPU Card HSB-835A
Chapter 2 Quick Installation Guide 2 -7
2.4List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Jumpers
Label Function
JP1
Clear CMOS