ABB Welcome M2306 User manual

User manual
M2306 & M2307, Lift control module
Please select your language
English
Suomi
Français
Norsk
Polski
Svenska
Italiano
Dansk
Español
Pусский
Português
简体中文
Čeština
Deutsch
Slovenčina
Nederlands

VER:1.2 │ │ 29.07.2016
ABB-Welcome
Pos: 2/Di nA4 - Anleitung enO nline/Inhalt/KNX/D oorEntry/832 20-AP-xxx/Tit elblatt - 83220-AP-xxx - ABB @ 19\mod_1 323249806476_15. docx@ 11 1084@ @ 1
Lift control module
M2306
M2307
=== Ende der List ef ür Textmar keC over ===

ABB-Welcome
|
—2 —
Pos: 4 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokumen tation/Inhalts verzeichnis (--> Für alleD okumente <--)/I nhaltsverzeichnis @ 19\ mod_1320649044386_1 5.docx@ 1 09653 @ @ 1
1Safety............................................................................................................3
2Environment ..................................................................................................3
2.1 ABB devices.................................................................................3
3Technical data...............................................................................................4
4Function.........................................................................................................5
5Connection ....................................................................................................6
5.1 M2306...........................................................................................6
5.2 M2307...........................................................................................7
5.3 Lift control relay module address by binary setting.......................9
6Mounting / Installation..................................................................................10
6.1 Requirements for the electrician.................................................10
6.2 Mounting.....................................................................................12
7User case ....................................................................................................13
7.1 High building (no more than 16 floors) with one lift.....................13
7.2 High building (more than 16 floors) with one lift..........................15
7.3 High building (more than 16 floors) with two lifts ........................17
7.4 High building (more than 16 floors) with four lifts........................18
8Operation.....................................................................................................19
8.1 User scenario illustration of visitor target floor............................19
8.2 User Scenario Illustration of resident target floor........................20
9Configuration through PC software..............................................................21
9.1 Connected to PC ........................................................................21
9.2 Configuration..............................................................................22
=== Ende der Liste fürT extmarke TOC ===

ABB-Welcome
Pos: 6 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Überschrift en( --> Füralle Do kumente <--)/1. Ebene/S - T/Sicherh eit@ 18\mod _1302612791790_1 5.docx @ 103357@ 1 @ 1
1 Safety
Pos: 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Dokum entation/Sicherheit (--> Für alle Doku mente< --)/Warnhin weise/Sicherheit - 230 V @ 18\mod_1302606 816750_15.docx @ 103308 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Work on the 100-240 V supply system may only be performed by
authorized electricians!
–Disconnect the mains power supply prior to installation and/or
disassembly!
Pos: 10 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/U -Z/U mwelt @ 18\mod_1302 614158967_15.docx @ 10 3383@ 1 @ 1
2 Environment
Pos: 11 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--)/Hi nweise/Hin weis- U mwelt- Hinweis Ele ktrogeräte@ 18\m od_130276397343 4_15.docx @ 103500 @ @1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
household waste.
–The device contains valuable raw materials that can be recycled.
Therefore, dispose of the device at the appropriate recycling
facility.
Pos: 12 /DinA4 - Anleitungen Online/Ue berschriften/2./ABB G eraete@ 1 9\mod_13231628 43832_15.docx @ 110875 @ 2 @ 1
2.1 ABB devices
Pos: 13 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alleD okum ente<--)/Hi nweise/Hin weis- U mwelt- ABB Ele ktrogeräte@ 19\m od_1323162745839_1 5.docx @ 110867 @ @1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via an authorized collecting depots or disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB-Welcome
3 Technical data
Pos: 14 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Te chnische Daten/Di mmer/Technisc heD aten - 6591 U-101 @ 23 \mod_133308908 5280_15.docx @ 2070 39@ @ 1
General
Single-wire
clamps
2 x 0.28 mm - 2 x 0.75 mm;
Fine-wire clamps
2 x 0.28 mm - 2 x 0.75 mm;
Bus voltage
20-30 V DC
Size
4 TE
Protection
IP 20
Operating
temperature
-25 °C - +55 °C
Size
M2306: 90 mm x 72 mm x 65 mm
M2307: 216 mm x 110 mm x 45 mm

ABB-Welcome
Pos: 15 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenum bruch++ +++++++ +++ @ 9\mod _1268898668 093_0.docx @ 5 2149@ @ 1
4 Function
Pos: 22 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /2. Ebene/G- L/Lastarten @ 20\mod_1326269 704379_15.docx @ 136905 @ 2 @ 1
The lift control modules include the M adaptor (M2306) and lift control relay module (M2307). These
two devices together ensure that lift (elevator) only goes to authorized floor(s).
If a resident presses the "unlock" button when receiving a guest's call from the outdoor station, or the
authorized user swipes the registered card or enters correct password, the lift (elevator) will
automatically go down to the floor where the outdoor station is installed. The lift (elevator) will then
go to the dedicated floor where that resident lives. It cannot go to unauthorized floors, even when
other buttons are pressed.
The configuration should be done through the dedicated configuration software by connecting the M
adaptor to a computer.

ABB-Welcome
Pos: 30 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Anschluss @ 19\mod_1 309248278435_15.doc x@ 1 07413@ 1 @ 1
5 Connection
5.1 M2306
Pos: 31 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/A nschluss/Dim mer/Anschluss - 6591 U-1 01@ 2 3\mod_1333093 920008_15.doc x@ 207 132 @ @ 1
Fig.
1
No.
Function
1
Status
- ON = Connected with the system controller/internal bus
- OFF = Not connected with the system controller/internal bus
- Blinking = Working with the system controller/internal bus
2
- ON = Power on
- OFF = Power off
- Blinking = Working
3
Connect with M2307
4
Power supply
5
Connect with the system controller/internal bus

ABB-Welcome
5.2 M2307
Pos: 31 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/A nschluss/Dim mer/Anschluss - 6591 U-1 01@ 2 3\mod_1333093 920008_15.doc x@ 207 132 @ @ 1
Fig.
2
No.
Function
1
Power LED
- ON = Power on
- OFF = Power off
2
Setting LED
- Blinks when working normally
3
Address
Set the module address
The address range is 1-16.Only the left 4 bits are used.
4
Power supply
5
Connect with M2306
6
Connect with the lift controller

ABB-Welcome
Pos: 24 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Online-D okumentation (--> F üralle Do kumente <--)/++++++ ++++++ Seitenumbruch ++++++++ ++++ @ 9\mod_12688 98668093_0.docx @ 52149 @ @ 1

ABB-Welcome
5.3 Lift control relay module address by binary setting
Fig.
3
Installer needs only read the labeling on the lift control module
and adjust according to the given position.
Only digits 1-2-3-4 are used.

ABB-Welcome
6 Mounting / Installation
Pos: 34 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sich erheit- Ni ederspan nungs- und 230 V-Leitunge n @ 18\mod_13 02617821491_15. docx @1 03465 @ @1
Warning
Electric voltage!
Risk of death and fire due to electric voltage of 230 V.
–Low-voltage and 230 V cables must not be installed together in a
flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the
low-voltage line.
Pos: 35 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sich erheit- Vorgeschaltete Sicherung absch alten @ 20\mod_ 1326441711467 _15.docx @ 137043 @ @ 1
Warning
Electric voltage!
The upstream fuse must be disconnected when working on the lighting
system.
Pos: 36 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Dokumente <--) /Warnhinweise/Sicherh eit- Fac hkenntnisse @ 18\mod_130 2774384017_15.doc x@ 1 03564 @ 2@ 1
6.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
•Incorrect installation endangers your life and that of the user of the
electrical system.
•Incorrect installation can cause serious damage to property, such as
a fire.
The minimum necessary expert knowledge and requirements for the
installation are as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect the power;
2. Secure against being reconnected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.

ABB-Welcome
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type of supply network (TN system, IT system, TT system)
to secure the following power supply conditions (classic connection
to ground, protective earthing, necessary additional measures, etc.).

ABB-Welcome
6.2 Mounting
Pos: 38 /Busch-J aeger (Neustru ktur)/Modul- Struktur /Online-Do kumentation/Mo ntage/alle Geräte/Montag e - UP-Dosen - DIN 49073-1 oder geeign etes Aufputzgehaeuse - Ohne Doc variable @ 20\mod_1325766 034453_15.docx @ 136593 @ @ 1
The device must only be installed on mounting rails according to DIN EN 50022.
It is highly recommended that M2306 be installed in the lift motor room on the top floor
or the electrical riser, while M2307 should be installed in the lift cabin.
Fig.
4
Fig.
5
: Dismantle

ABB-Welcome
7 User case
7.1 High building (no more than 16 floors) with one lift
One M2306 and one M2307
Pos: 41 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/I nbetriebnahme/Di mmer/Inbetrieb nahme - 6591 U-101 @ 19\ mod_13119487 81023_15.docx @ 108 300 @ 222 @ 1
Fig.
6
: Topology

ABB-Welcome
Wiring with one M2306 and one M2307
Fig.
7

ABB-Welcome
7.2 High building (more than 16 floors) with one lift
one M2306 and multi (up to 16) M2307
Fig.
8
: Topology

ABB-Welcome
Wiring with one M2306 and multi M2307
Fig.
9
Notes:
1.The first mini system controller (M2301) feeds one M2306 and one M2307.
2. An additional M2307 should be locally powered by one mini system controller. Eg. with
(4) M2307 and (1) M2306, 4 mini system controllers are needed.

ABB-Welcome
7.3 High building (more than 16 floors) with two lifts
one M2306 and multi M2307 support 2 lifts
Fig.
10
: Topology
Note: The address code can not be repeated.

ABB-Welcome
7.4 High building (more than 16 floors) with four lifts
Two M2306 and multi M2307 support 4 lifts
Fig.
11
: Topology
Pos: 42 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-
Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @
9\mod_1268898668093_0.docx @ 52149 @ @ 1
Note: The address code can not be repeated.

ABB-Welcome
Pos: 43 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alleD okument e<--) /1. Ebene/A- F /Bedienung @ 11\mod_12 79185541649_15.d ocx@ 8 3043@ 1 @ 1
8 Operation
Pos: 44 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/B edienung/Di mmer/Bedienung - 65 91U- 101 @ 23\mod_13 33091293158_15.d ocx @ 207069 @ @ 1
8.1 User scenario illustration of visitor target floor
Fig.
12
Pos: 42 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F üralle Do kumente <--)/+++++ +++++++ Seitenumbruch +++++++ +++++ @ 9\mod_1268 898668093_0.doc x@ 52149 @ @ 1
1.Visitor inputs
calling code for
the 12th floor.
2. The resident presses the "unlock" button
at any ABB-Welcome indoor station.
3. The lift will go down to the
outdoor station automatically
when visitor enters the lift.
4. Within a set of time
(default of 10 minutes),
the visitor can only
activate the 12th floor.
Other floors will not be
activated at the same
time.
After 10 minutes, the visitor
must go to the outdoor station
to call the resident again.
5. The visitor
reaches the
12th floor.