ABB ABB-Welcome User manual

0073-1-7523 │ │ 14.11.2012
ABB-Welcome
Pos: 2 /DinA4 - Anleitungen O nline/Inhalt/K NX/DoorEntry/ 83300/Titelblatt - 83300 - ABB @ 19\mod_1323173 449723_15.doc x@ 110999 @ @ 1
83300-500
83300
-515
System controller
=== Ende der Liste für Textmarke Co ver ===

ABB-Welcome
| 0073-1-7523
— 2 —
Pos: 4 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Inhalts verzeichnis (--> Für alle Dokumente < --)/Inhaltsverzeichn is @ 19\mod_1320649044386_15. docx @ 109653 @ @1
1Safety.......................................................................................................................................................................3
2Intended use............................................................................................................................................................3
3Environment.............................................................................................................................................................3
3.1 ABB devices............................................................................................................................................3
4User Manual.............................................................................................................................................................3
5Operation.................................................................................................................................................................4
5.1 Standard operation .................................................................................................................................4
6Technical data..........................................................................................................................................................5
7Mounting / Installation..............................................................................................................................................6
7.1 Requirements for the electrician .............................................................................................................6
7.2 General installation instructions ..............................................................................................................6
7.3 Mounting .................................................................................................................................................7
7.4 Connection..............................................................................................................................................7
=== Ende der Liste für Textmarke TOC ===

ABB-Welcome
Safety
| 0073-1-7523
— 3 —
Pos: 6 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Über schriften (--> Für alle Dokumen te<--) /1. Ebene/S - T/Sicher heit @ 18\mod_1302612791790_1 5.docx @ 103357 @ 1 @ 1
1 Safety
Pos: 7 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Sic herheit (--> Für alle Dokumente < --)/Warnhinweise/Sic herheit - 230 V @ 18\mod_130260681 6750_15.docx @ 103308 @ @1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Work on the 230V supply system may only be performed by authorised electricians!
– Disconnect the mains power supply prior to installation and/or disassembly!
Pos: 8 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Über schriften (--> Für alle Dokumen te< --)/1. Ebene/A - F/Bestim mungsgemäßer Gebrauch @ 18\mod_130 2763321316_15.doc x @ 103483 @ 1@ 1
2 Intended use
Pos: 9 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/D oorEntry/83300/B estimmungsgemaesser Gebrauc h - 83300-500 @ 19\mod_1323173289184_1 5.docx @ 110990 @ @1
The 83300-500 system controller is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. The device must only be installed on mounting rails
according to DIN EN 500022.
Pos: 10 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Überschriften (--> Für alle Dokume nte <--)/1. Ebene/U - Z/ Umwel t @ 18\mod_130261 4158967_15.docx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Umwelt (--> Für alle Dokumente <--) /Hinwei se/Hi nweis - Umwelt - Hinwei s Elektrogeräte @ 18\mod_130 2763973434_15.doc x @ 103500@ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic waste.
– The device contains valuable raw materials which can be recycled. Therefore, dispose of the
device at the appropriate collecting depot.
Pos: 12 /DinA4 - Anleitungen Online/ Ueberschriften/2. /ABB Geraete @ 19\mod_13231628 43832_15.docx @ 110875 @ 2 @ 1
3.1 ABB devices
Pos: 13 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Umwelt (--> Für alle Dokumente <--) /Hinwei se/Hi nweis - Umwelt - ABB E lektrogeräte @ 19\mod_1323162 745839_15.docx @ 110867 @ @1
All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always
dispose of the packaging material and electric devices and their components via the authorized collecting depots
and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)
Pos: 14 /DinA4 - Anleitungen Online/ Ueberschriften/1. /Anwenderhandbuch @ 19\mod_ 1309347227593_15.doc x@ 107 473 @ 1@ 1
4 User Manual
Pos: 15 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEntr y/Systemhandbuch/ Anwenderhandbuch - ABB @ 19\mod_13231631 57997_15.docx @ 110883 @ @1
Detailed information for planning ABB-Welcome systems is contained in the user manual. Download at
www.Busch-Jaeger.com.
Pos: 16 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 52149 @ @ 1

ABB-Welcome
Operation
| 0073-1-7523
— 4 —
Pos: 17 /DinA4 - Anleitungen Online/ Ueberschriften/1. /Bedienung @ 18\mod_130261 3924165_15.docx @ 103365 @ 1 @ 1
5 Operation
Pos: 18 /DinA4 - Anleitungen Onli ne/Ueberschriften/ 2./Normaler Betri eb @ 18\mod_1302768820965_15. docx @ 103540 @ 2 @ 1
5.1 Standard operation
Pos: 19 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEn try/83300/Bedienung - 83300 @ 18\mod_ 130321507813 3_15.docx @ 103730 @ @1
Fig. 1:
No.
Function
1
Setting the duration for the door opener
– When activated, the door can be opened during the period from 1 second to 10 seconds, depending on
the setting.
2
Setting the duration of the lighting
– When activated, the lighting remains on for 1 second to 5 minutes, depending on the setting.
3
Status LED
The status LED lights up permanently = the device is operating
The status LED flashes slowly = the device is operating
The status LED flashes fast = there is an error
4
Floating output of door opener
5
Power supply of door opener
6
• Connection for the outdoor station
• When using several outdoor stations: connection for the external bus
7
• Connection for the indoor station
• When using several indoor stations: connection for the internal bus
8
Floating output for the light
9
Power supply
Pos: 20 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 52149 @ @ 1

ABB-Welcome
Technical data
| 0073-1-7523
— 5 —
Pos: 21 /DinA4 - Anleitungen Online/ Ueberschriften/1. /Technische Daten @ 18\mod_1302 615863001_15.docx @ 103416 @ 1 @ 1
6 Technical data
Pos: 22 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEn try/83300/Technisc he Daten - 83300 @ 18\mod_130321507 9179_15.docx @ 103762 @ @1
Designation
Value
Operating temperature
-5℃to +45℃
Storage temperature
-20°C – +70°C
Protection
IP 20
Single-wire clamps
2 x 0.6 mm² – 2 x 1 mm²
Fine-wire clamps
2 x 0.6 mm² – 2 x 0.75 mm²
Volume
Maximum 80 dB
Mains voltage
100-240 V, 50 / 60 Hz, 0.9 A
Power supply for door opener
12 V~; 1.6 A
Floating output for door opener
30 V AC/DC; 3 A
Floating output for light
230 V~; 3 AX
Bus voltage
28 V- ±2 V, 1.5 A
Size
12 TE
Pos: 23 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB-Welcome
Mounting / Installation
| 0073-1-7523
— 6 —
Pos: 24 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Überschriften (--> Für alle Dokume nte <--)/1. Ebene/M - O/Montag e / Installation @ 18\mod_13026139 66111_15.docx @ 103373 @ 1 @ 1
7 Mounting / Installation
Pos: 25 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Sic herheit (--> Für alle Dokument e <--)/Warnhinweise/Sic herheit - Niederspannun gs-und 230 V-Lei tungen @ 18\mod_130261782149 1_15.docx @ 103465 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Low-voltage and 230 V cables must not be installed together in a flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the low-voltage line.
Pos: 26 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Sic herheit (--> Für alle Dokument e <--)/Warnhinweise/Sic herheit - Fachkenntnisse @ 18\m od_1302774384017_15.d ocx @ 103564 @ 2 @ 1
7.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering knowledge and experience.
• Incorrect installation endangers your life and that of the user of the electrical system.
• Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
• Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.
• Use suitable personal protective clothing.
• Use only suitable tools and measuring devices.
• Check the type supply network (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Pos: 27 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/DoorEn try/Montage/Montagehin weise - Allgemein @ 19\mod_131056 3670478_15.docx @ 107743 @ 2 @ 1
7.2 General installation instructions
• Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,
system device).
• Do not install the system controller directly next to the bell transformer and other power supplies (to avoid
interference).
• Do not install the wires of the system bus together with 230 V wires.
• Do not use common cables for the connecting wires of the door openers and wires of the system bus.
• Avoid bridges between different cable types.
• Use only two wires for the system bus in a four-core or multi-core cable.
• When looping, never install the incoming and outgoing bus inside the same cable.
• Never install the internal and external bus inside the same cable.
Pos: 28 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 521 49 @ @ 1

ABB-Welcome
Mounting / Installation
| 0073-1-7523
— 7 —
Pos: 29 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Überschriften (--> Für alle Dokume nte <--)/2. Ebene/M - O/Montag e @ 18\mod_1302615960458_15. docx @ 103424 @ 2 @ 1
7.3 Mounting
Pos: 30 /DinA4 - Anleitungen Online/ Inhalt - Montage/Montage - Hutsc hienen nach DIN EN 500022 @ 18\mod_1 303218164750_15.doc x @ 103868 @ @ 1
The device 83300-500 must only be installed on mounting rails according to DIN EN 500022.
Pos: 31 /DinA4 - Anleitungen Online/ Ueberschriften/2. /Anschluss @ 18\mod_13026 17573351_15.docx @ 103449 @ 2 @ 1
7.4 Connection
Pos: 32 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEn try/83300/Anschluss - 83300 @ 18\mod _1303215077836_ 15.docx @ 103722 @ @1
Fig. 2:
No.
Function
1
Floating output of door opener
2
Power supply of door opener
3
• Connection for the outdoor station
• When using several outdoor stations: connection for the external bus
4
• Connection for the indoor station
• When using several indoor stations: connection for the internal bus
5
Floating output for the light
6
Power supply
Pos: 33.1 /DinA4 - Anleitung en Online/Inhalt/KNX/DoorEn try/Video-Module/Ein leitungen/Einlei tung- Mo ntage und Anschluss des Gerae tes @ 20\mod_1324553399047_1 5.docx @ 112597 @ @1

ABB-Welcome
Mounting / Installation
| 0073-1-7523
— 8 —
Video for mounting and connecting the device
Pos: 33.2 /DinA4 - Anleitung en Online/Inhalt/KNX/DoorEn try/Video-Module/Video s/Sprachneutral/Vi deo Montage - Systemzentral e - Montage-Anschluss @ 21\mod_13297503407 30_0.docx @ 198759 @ @1
=== Ende der Liste für Textmarke Con tent ===

ABB-Welcome
0073-1-7523 | | 14.11.2012
Pos: 35 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Rückseiten (--> Für alle Dokumente < --)/Rückseite - Busch-Jaeger - Allgemein @ 20\mod_1327 320074886_15.doc x@ 137103 @ @ 1
A
member of the ABB Group
Busch
-Jaeger Elektro GmbH
PO box
58505 Lüdenscheid
Freisenbergstraße 2
58513 Lüdenscheid
Germany
www.BUSCH
-JAEGER.com
[e-mail]
Central sales service:
Phone:
[phone]
Fax:
[phone]
Notice
We reserve the right to at all times make
technical changes as well as changes to the
contents of this document without prior notice.
The detailed specifications agreed to at the time
of ordering apply to all orders.
ABB accepts no
responsibility for possible errors or
incompleteness in this document.
We reserve all rights to this document and the
topics and illustrations contained therein. The
document and its contents, or extracts thereof,
must not be reproduced, transmitted or reused by
third parties without prior written consent by ABB.
Copyright© 2012
Busch-Jaeger Elektro GmbH
All rights reserved
=== Ende der Liste für Textmarke Bac kcover ===