ABB RTC-F-1.PB User manual

1473-1-8574│14.08.2014
Technical Manual
Room temperature controller
RTC-F-1.PB

ABB-free@home®Content
Technical Manual 1473-1-8574 │2
1Notes on the instruction manual ________________________________________________________ 3
2Safety ____________________________________________________________________________ 4
2.1 Used symbols ________________________________________________________________________ 4
2.2 Intended use _________________________________________________________________________ 5
2.3 Improper use _________________________________________________________________________ 5
2.4 Target group / qualification of personnel ____________________________________________________ 5
2.5 Safety instructions _____________________________________________________________________ 6
3Information on protection of the environment ______________________________________________ 7
4Product description __________________________________________________________________ 8
4.1 Scope of supply_______________________________________________________________________ 8
4.2 Type overview ________________________________________________________________________ 9
4.3 Function overview _____________________________________________________________________ 9
4.4 Device overview of room temperature controller______________________________________________ 9
5Technical data _____________________________________________________________________ 10
5.1 Main overview _______________________________________________________________________ 10
5.2 Dimensions _________________________________________________________________________ 10
5.3 Circuit diagrams______________________________________________________________________ 10
6Mounting _________________________________________________________________________ 11
6.1 Planning instructions __________________________________________________________________ 11
6.2 Safety instructions for mounting _________________________________________________________ 11
6.3 Mounting / Installation _________________________________________________________________ 12
7Commissioning ____________________________________________________________________ 14
7.1 Allocation of devices and specifying channels ______________________________________________ 14
7.2 Setting options per channel_____________________________________________________________ 17
7.3 Linking _____________________________________________________________________________ 19
8Updating options ___________________________________________________________________ 20
9Operation_________________________________________________________________________ 21
9.1 Displays / messages __________________________________________________________________ 23
10 Maintenance ______________________________________________________________________ 24
10.1 Cleaning ___________________________________________________________________________ 24

ABB-free@home®Notes on the instruction manual
Technical Manual 1473-1-8574 │3
1 Notes on the instruction manual
Please read this manual through carefully and adhere to the information contained
therein. This will assist you in preventing damage to persons and property and ensure
reliable operation and long service life of the device.
Please keep this manual in a safe place.
If you pass the device on, also include this manual.
Busch-Jaeger accepts no liability for failure to observe the instructions in this manual.
If you require additional information or have questions about the device, please contact
Busch-Jaeger or visit our Internet site at:
www.BUSCH-JAEGER.com
www.abb.com/freeathome

ABB-free@home®Safety
Technical Manual 1473-1-8574 │4
2 Safety
The device has been constructed according to the latest valid regulations governing
technology and is operationally reliable. It has been tested and left the factory in a
technically safe and reliable state.
However, residual hazards remain. Read and adhere to the safety instructions to pre-
vent such hazards.
Busch-Jaeger accepts no liability for failure to observe the safety instructions.
2.1 Used symbols
The following symbols point to dangers involved in the use of the device and provide
practical instructions.
Warning
This symbol in connection with the signal word "Warning" indicates
a dangerous situation which could lead to immediate death or to
serious injury.
Attention - damage to property
This symbol indicates a possibly damaging situation for the product.
Non-observance can lead to damage or destruction of the product.
Note...
This symbol indicates information or references to additional useful
topics. This is not a signal word for a dangerous situation.
This symbol indicates information on the protection of the environ-
ment.
The following symbols are used in the manual to draw attention to special dan-
gers:
This symbol indicates a dangerous situation due to electric current.
If such a sign is ignored, it can lead to serious injuries or even
death.

ABB-free@home®Safety
Technical Manual 1473-1-8574 │5
2.2 Intended use
This device is a room temperature controller for decentralized flush-mounted
installation.
The room temperature controller (with bus coupler) is suitable for the control of
conventional heating and cooling systems.
The device is intended for the following:
» operation according to the listed technical data,
» installation in dry interior rooms and suitable flush-mounted boxes,
» use with the connecting options available on the device.
The intended use also includes adherence to all specifications in this mnaual.
2.3 Improper use
Each use not listed in chapter 2.2 is deemed improper use and can lead to
personal injury and damage to property.
Busch-Jaeger is not liable for damages caused by use deemed contrary to the
intended use of the device. The associated risk is borne exclusively by the user/
operator.
The device is not intended for the following:
» unauthorized structural changes,
» repairs,
» use outdoors or in bathroom areas,
» use with an additional bus coupler.
2.4 Target group / qualification of personnel
Installation, commissioning and maintenance of the device must only be carried
out by trained and properly qualified electrical installers.
The electrical installers must have read and understood the manual and follow
the instructions provided.
The electrical installers must adhere to the valid national regulations in their
country governing the installation, functional test, repair and maintenance of elec-
trical products.
The electrical installers must be familiar with and correctly apply the "Five safety
regulations" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth and short-circuit;
5. Cover or barricade adjacent live parts.

ABB-free@home®Safety
Technical Manual 1473-1-8574 │6
2.5 Safety instructions
Warning
Electric voltage! Risk of death and fire due to electrical voltage of
230 V.
Dangerous currents flow through the body when coming into direct
or indirect contact with live components. This can result in electric
shock, burns or even death.
» Work on the 230 V supply system may only be performed by
authorised and qualified electricians.
» Disconnect the mains power supply before installation /
disassembly.
» Never use the device with damaged connecting cables.
» Do not open covers firmly bolted to the housing of the device.
» Use the device only in a technically faultless state.
» Do not make changes to or perform repairs on the device, on its
components or its accessories.
» Keep the device away from water and wet surroundings.
Attention - damage to property
Risk of damaging the device due to external factors.
Moisture and contamination can damage or destroy the device.
» Protect the device against humidity, dirt and damage during
transport, storage and operation.

ABB-free@home®Information on protection of the
environment
Technical Manual 1473-1-8574 │7
3 Information on protection of the environment
All packaging materials and devices bear the markings and test seals for proper
disposal.
The products meet the legal requirements, in particular the laws governing elec-
tronic and electrical devices and the REACH ordinance (EU Directive
2002/96/EG WEEE and 2002/95/EG RoHS), (EU-REACH Directive and Law for
the Execution of the Directive (EG) No.1907/2006).
The device contains valuable raw materials which can be recycled.
Used electric and electronic devices must not be disposed of with
domestic waste.
» Always dispose of the packaging material and electric devices
and their components via the authorized collecting depots and
disposal companies.

ABB-free@home®Product description
Technical Manual 1473-1-8574 │8
4 Product description
Fig. 1: Product overview
[1] Flush-mounted insert
[2] Support ring (not included in scope of delivery)
[3] Cover frame (not included in scope of delivery)
[4] Cover/push-button (not included in scope of delivery)
This device is a room temperature controller for decentralized flush-mounted
installation.
The room temperature controller (with bus coupler) is suitable for the control of
conventional heating and cooling systems.
The devices are not pre-programmed. The devices must be parameterised for the
use of the functions.
The integrated bus coupler makes possible the connection to the free@home bus
line.
4.1 Scope of supply
The scope of supply only contains the flush-mounted insert [1]. It must still be
completed with a support ring [2], a cover frame [3] and a cover/a push-button [4].
Note...
Additional information about the switch ranges is available in the
electronic catalogue (www.busch-jaeger-catalogue.com).
1
2
3
4

ABB-free@home®Product description
Technical Manual 1473-1-8574 │9
4.2 Type overview
Article no. Product name Sensor channels
RTC-F-1.PB Room temperature controller 1
Table 1: Overview of types
4.3 Function overview
The following table provides an overview of the possible functions and
applications of the device:
Icon of the operating surface Information
Name: Room temperature controller
Type: Actuator
Made available by: Room temperature controller
Function: Controls free@home heating actuators
Table 2: Function overview
Note...
The room temperature controller operates as PI controller and in time
adjusts its control value also to the response of the room.
4.4 Device overview of room temperature controller
Fig. 2: Device overview of room temperature controller
[1] Display
[2] Mark TOP
[3] Type plate
[4] Bus connection terminal
4
3
21

ABB-free@home®Technical data
Technical Manual 1473-1-8574 │10
5 Technical data
5.1 Main overview
Parameters Value
Power supply 24 V DC (via bus line)
Bus subscribers 1 (12mA)
Connection
Bus connection terminal: 0.4-0.8 mm
Cable type: J-Y(St)Y, 2x2x0.8 mm
Wire stripping: 6-7 mm
Protection IP20
Ambient temperature -5 °C – +45 °C
Storage temperature -20 °C – +70 °C
Table 3: Technical data
5.2 Dimensions
Note...
All dimensions are in mm.
Fig. 3: Dimensions
5.3 Circuit diagrams
Fig. 4: Electrical connection
17,9
44
46
11,5
Bus
+
-

ABB-free@home®Mounting
Technical Manual 1473-1-8574 │11
6 Mounting
6.1 Planning instructions
Note...
Planning and application instructions for the system are available in
the free@home system manual. They can be downloaded at
www.abb.com/freeathome.
6.2 Safety instructions for mounting
Warning - Risk of death due to electrical voltage
Dangerous currents flow through the body when coming into di-
rect or indirect contact with live components. This results in elec-
tric shock, burns or even death.
Work improperly carried out on electrical systems is a hazard to
one's own life and that of the user. Also fires and serious damage
to property can result.
» Install the device only if you have the necessary electrical engi-
neering knowledge and experience (see chapter 2.4).
» Use suitable personal protective clothing.
» Use suitable tools and measuring devices.
» Check the supply network type (TN system, IT system,
TT system) to secure the following power supply conditions
(classic connection to ground, protective earthing, necessary
additional measures, etc.).
» Observe the correct polarity.

ABB-free@home®Mounting
Technical Manual 1473-1-8574 │12
6.3 Mounting / Installation
» Turn the device into the correct installation
position.
- The mark "TOP" must be aligned toward
the top.
» Turn the support ring into the correct instal-
lation position.
- The mark "TOP" must be aligned toward
the top.
» Push the device through the support ring
until it latches into the support ring.
» Connect the free@home bus line with the
bus connection terminal [1].
Observe the correct polarity!
» Insert the device into the flush-mounted
box and screw it on.
1
2

ABB-free@home®Mounting
Technical Manual 1473-1-8574 │13
» In case the cover has not been pre-
mounted or if it has been pulled off, attach
it to the device insert.

ABB-free@home®Commissioning
Technical Manual 1473-1-8574 │14
7 Commissioning
Commissioning is always carried out via the Web-based surface of the System
Access Point.
The System Access Point establishes the connection between the free@home
participants and the smartphone, tablet or PC. It is used to identify and program
the participants during commissioning.
Devices which are physically connected to the free@home bus, log themselves
automatically into the System Access Point. They transmit information about their
type and supported functions (see Table 2, chapter 4.3).
During initial commissioning all devices are given a generic name (e.g. room
temperature controller1, etc.). The user must change this name to a name
practical for the system (Example: "Room temperature controller living room").
The devices must be parameterised for the use of the functions.
Commissioning of the room temperature controllers is described in the following
chapters. Here it is assumed that the basic commissioning steps of the overall
system have already been carried out. General knowledge about the Web-based
commissioning software of the System Access Point is assumed.
Note...
General information about commissioning and parameterization is
available in the technical reference manual and the online Help of the
System Access Point.
7.1 Allocation of devices and specifying channels
The devices connected to the system must be identified, i.e. they are allocated to
a room according to their function and are given a descriptive name.
The allocation is made via the allocation function of the Web-
based user interface of the System Access Point.

ABB-free@home®Commissioning
Technical Manual 1473-1-8574 │15
7.1.1 Adding device
Fig. 5: Adding device
» In the "Add device" bar select the desired application and pull it via drag-and-
drop onto the floor plan in the working area.
Fig. 6: Allocation
- A pop-up window opens automatically which lists all the devices suitable for
the application selected.
The desired device can be identified in 2 ways.

ABB-free@home®Commissioning
Technical Manual 1473-1-8574 │16
Identification via serial number
Fig. 7 Identification via serial number
» Compare the short 3-digit number of the identity label, which should be glued
to the device plan, with the numbers in the list and in this way identify the de-
vice you are searching for and, if necessary, also the channel.
Identification via switching (only suitable for actuators)
Fig. 8 Identification via switching
» Select a device and a channel from the list.
» Press the button in the detailed view of the device.
- The connected load is switched.
» Continue until you have found the device you are looking for.
RTC flushm. Livingr.
L
R
A
PMO
ABB700000013
Room Temperature Controller
Room Temperature Controller
Room Temperature Controller
Room Temperature Controller
Attic
Livingroom
ALLOCATION ROOM TEMPERATURE CONTROLLER
ABB700000027
ABB700000027
PMO
PMO
Room Temperature Controller

ABB-free@home®Commissioning
Technical Manual 1473-1-8574 │17
7.2 Setting options per channel
General settings and special parameter settings can be made for each channel.
The settings are made via the allocation function of the Web-
based user interface of the System Access Point.
Device selection
Fig. 9: Device selection
» Select the device icon [1] in the floor plan of the working area view.
- All setting options for the respective channel are displayed in the list view [2].
The following settings are available.
1
2

ABB-free@home®Commissioning
Technical Manual 1473-1-8574 │18
7.2.1 Settings of the room temperature controller
Actuator settings
[1] Changing the name
[2] Deleting the channel via 'X'
[3] Switching of the actuator via the button
[4] Setting the ECO temperature reduction
in °C - Specifying the value to which the
temperature is reduced after the ECO
mode is activated.
[5] Setting the temperature correction in °C -
Manual increase/reduction of the tempera-
ture value if the temperature is repeatedly
not reached automatically.
[6] Setting the switch-off delay in seconds
during absence
If the ECO mode is deactivated by a
movement detector, the switch-off delay
can be specified here when the ECO
mode is to be re-activated after the room
is exited.
Other settings
Extension unit operation - The room temperature controller can be configured in
the device settings as extension unit. In this setting only the temperature sensor
of the main unit is evaluated, the extension unit serves only for selecting the op-
erating mode, and the set-value temperature.
Room Temperature Controller
Room Temperature Controller
1
4
5
6
3
2

ABB-free@home®Commissioning
Technical Manual 1473-1-8574 │19
7.3 Linking
The room temperature controllers created via the allocation function can now be
linked with binary inputs or heating actuators.
The linking in the list view is then made via the linking function of
the Web-based user interface of the System Access Point.
7.3.1 Linking the room temperature controller with an actuator
Fig. 10: Linking the room temperature controller with an actuator
» To link the room temperature controller with an actuator, first click on the
desired room temperature controller [1] which is to operate the actuator and
then on the actuator [2].
» Press the tick at the bottom right to take over your entries.
- A blue connecting line indicates the link between the two devices.
The configuration is now transmitted automatically to the devices. The
transmission can (depending on the number of affected devices) take a
number of seconds. During the transmission a progress bar is displayed
around the devices affected.
2
Room Temperature Controller
Room Temperature Controller
1

ABB-free@home®Updating options
Technical Manual 1473-1-8574 │20
8 Updating options
A Firmware update is carried out via the Web-based user interface of the System
Access Point.