ABB Welcome M M2233 User manual

VER:1.0 ││04.04.2014
ABB-Welcome M
Pos: 2 /DinA 4 - Anl eitun gen Onl ine /Inh alt /KN X/D oo rEntry /832 20-A P- xx x/Tit el blat t - 832 20-AP -xxx - AB B @ 1 9\ mod_ 132 3249 806 476 _15. docx @ 11 108 4 @ @ 1
M2233.-.
7" Video hands-free indoor
station
===E nde der Lis te für Tex tmarke C over == =

ABB
-Welcome
| — 2 —
Pos: 4 /Busc h-Ja ege r (N eust rukt ur)/Mo dul -St ruktu r/O nli ne-D ok u ment ation /Inh al tsve rzei ch nis ( --> Fü r alle D oku men te <-- )/In haltsv e rzeic hni s @ 19\ mod _13 206 490 4438 6_1 5.d ocx @ 109 653 @ @ 1
1Safety.......................................................................................................4
2Intended use.............................................................................................4
3Environment..............................................................................................4
3.1 ABB devices.............................................................................4
4Operation..................................................................................................6
4.1 Standard operations..................................................................6
4.1.1 Control elements.......................................................................6
4.1.2 Welcomescreen and status bar.................................................8
4.2 Control actions........................................................................10
4.2.1 Surveillance............................................................................10
4.2.2 Intercom .................................................................................11
4.2.3 Calling Guard unit...................................................................12
4.2.4 Switch Actuator.......................................................................13
4.2.5 Setting up the voice and video connections..............................14
4.2.6 Opening the door....................................................................15
4.2.7 Muting....................................................................................16
4.2.8 Activating the custom function.................................................17
4.2.9 Events and picture memory / history........................................19
4.2.10 Information..............................................................................23
4.2.11 Inserting the SD card..............................................................24
4.2.12 Settings..................................................................................25
4.2.12.1 Overview ................................................................................25
4.2.12.2 Intercom .................................................................................28
4.2.12.3 Switch Actuator.......................................................................31
4.2.12.4 Program button.......................................................................33
4.2.12.5 Leave Home Management ......................................................34
4.2.12.6 Voice Message.......................................................................36
4.2.12.7 Setting Door Open Password ..................................................38
4.2.12.8 Black list.................................................................................39
4.2.12.9 Audio Settings.........................................................................40
4.2.12.10 Auto Unlock............................................................................42
4.2.12.11 Display Settings......................................................................44
4.2.12.12 Date and Time........................................................................46
4.2.12.13 Language...............................................................................48
4.2.12.14 Setup......................................................................................49
4.2.12.15 Firmware Update ....................................................................51
4.3 Cleaning.................................................................................52
4.4 Adjusting the device................................................................53
4.4.1 Terminal resistor.....................................................................53

ABB
-Welcome
| — 3 —
4.4.2 Connection.............................................................................54
5Technical data.........................................................................................55
6Mounting / Installation..............................................................................56
6.1 Requirements for the electrician...............................................56
6.2 General installation instructions...............................................57
6.3 Mounting.................................................................................58
===E nde der Liste f ür Textma rke TOC == =

ABB
-Welcome M
Safety
| — 4 —
Pos: 6 /Busc h-Ja ege r (N eust rukt ur)/Mo dul -St ruktu r/O nli ne-D ok u ment ation /Ü be rschri ften (- -> Für alle D okum ent e < --)/1. Eb ene/S - T /Si cher heit @ 18\ mod _13 026 127 917 90_ 15.d oc x @ 103 357 @ 1 @ 1
1Safety
Pos: 7 /Busc h-Ja ege r (N eust rukt ur)/Mo dul -St ruktu r/O nli ne-D ok u ment ation /S icher hei t (--> Für all e Dok um ente <- -)/Wa rn hinw eise /S ic herhei t - 23 0 V @ 18\m od_ 130 260 681 675 0_15 .docx @ 1 033 08 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
– Work on the 100-240V supply system may only be performed by
authorised electricians!
– Disconnect the mains power supply prior to installation and/or
disassembly!
Pos: 8 /Busc h-Ja ege r (N eust rukt ur)/Mo dul -St ruktu r/O nli ne-D ok u ment ation /Ü be rschri ften (- -> Für alle D okum ent e < --)/1. Eb ene/A - F /Bes tim mun gsge mä ßer Geb rau ch @ 18\ mod _13 027 6332 131 6_1 5.do cx @ 1034 83 @ 1 @ 1
2Intended use
Pos: 9 /DinA 4 - Anl eitun gen Onl ine /Inh alt /KN X/D oo rEntry /832 20-A P- xx x/B esti mmu ngsg em aess e r Ge bra uch - 83 220 -AP -xxx- 500 @ 2 0\mo d_1 324 561 168 699 _15. doc x @ 11 272 8 @ @ 1
The M2233x-x is an integral part of the ABB Welcome M door communication system
and operates exclusively with components from this system. The device must only be
installed in dry indoor rooms.
Pos: 10 /B usc h-J aeg er (Neus truk t ur)/M odul -Strukt ur/O nline -Dok u me ntatio n/Ü be rsch rifte n ( --> Fü r alle D oku men te < --)/1. E bene /U - Z/U mwelt @ 18\ mod _13 026 141 5896 7_1 5.d ocx @ 103 383 @ 1 @ 1
3Environment
Pos: 11 /B usc h-J aeg er (Neus truk t ur)/M odul -Strukt ur/O nline -Dok u me ntatio n/U mw elt ( --> F üral l e Dok u me nte <--)/H inwei s e/Hi nw eis -U mwelt - H inwei s El ektr oge räte @ 1 8\mo d_1 302 763 973 434 _15. doc x @ 10 350 0 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
domestic waste.
– The device contains valuable raw materials which can be recycled.
Therefore, dispose of the device at the appropriate collecting
depot.
Pos: 12 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ers c hrift en/2 ./ AB B Gera ete @ 19 \ mod_1 323 162 843 832_ 15. docx @ 11 087 5 @ 2 @ 1
3.1 ABB devices
Pos: 13 /B usc h-J aeg er (Neus truk t ur)/M odul -Strukt ur/O nline -Dok u me ntatio n/U mw elt ( --> F üral l e Dok u me nte <--)/H inwei s e/Hi nw eis -U mwelt - A BB E lektro ger äte @ 19\ mo d_1 3231 627 458 39_ 15.d oc x @ 110 867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via the authorized collecting depots and disposal companies.

ABB
-Welcome M
Environment
| — 5 —
ABB products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB
-Welcome M
Operation
| — 6 —
Pos: 18 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ersc hrift en/1 ./B edie nun g @ 18\ mod_ 130 261 392 416 5_15 . docx @ 1 033 65 @ 1 @ 1
4Operation
Pos: 19 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ers c hrift en/2 ./ Nor male r Bet rieb @ 18 \mo d_1 302 768 8209 65_ 15. docx @ 10 3540 @ 2 @ 1
4.1 Standard operations
Pos: 20 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ers c hrift en/3 ./ Bedie nel e men te @ 20\ mod _13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3 @ 1
4.1.1 Control elements
Pos: 21 /Di nA 4 - A nl eitu ngen Onl in e/In hal t/KN X/D o orEnt ry/83 220 -A P-x xx/B e dienel eme nte - 8 322 0-A P-xx x @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103 673 @ @ 1
Fig. 1 Control elements

ABB
-Welcome M
Operation
| — 7 —
No. Functions
17"Touch screen
2Comunication button
2A While a call is coming, press this button to activate the communication
within 30 seconds and press it again to end the call.
2B In standby mode, press this button to set up the voice and video
connections to the default outdoor station.
3Unlock button
3A Press this button to open the door at any time.
3B Auto-unlock: the door is automatically opened after an incoming call.
If the LED lights up, this indicates auto-unlock.
If the LED flashes rapidly, it means the door is open over the set time (The
sensor must be connected first).
4Mute button
4A In standby mode, press this button to mute the ringtone for this indoor
station.
4B In standby mode, hold this button to mute the ringtone for all indoor
stations in the apartment.
4C While a call is coming, press this button to reject the call.
4D During the conversation, press this button to mute the microphone.
If the LED lights up ,this indicates a mute status.
5Programmable button 1
5A Release the lock connected with OS (COM-NC-NO) (default function)
5B *Programmable for additional functions, e.g. call to guard unit,
intercom.....
6History button
6A Press this button to display the "History" record.
6B When video is on the screen, press this button to take a snapshot
manually.
7System setting button
Enter the system settings menu for various functions of the device.
*For use of this button, please contact your electrical installer.

ABB
-Welcome M
Operation
| — 8 —
4.1.2 Welcome screen and status bar
Fig. 2 Status bar
During the calling period, the following functions are available:
No. Functions
1Current date
- Touch this button to set the current date..
2Time
- Touch this button to set the correct time .
3System information
- Touch this button to call up the address (number of the indoor station,
default outdoor station, master or slave station) on this panel and the
current software information.
4History
- New information is available in History (events and picture memory)
when this icon flashes. it means a missed call or a voice message.
- Touch this button to display the events and picture memory .
5Mute function
- Icons "crossed-out handset" and "crossed-out bell" indicate the mute
status of the microphone or the loudspeaker of the panel.
39
2465 7 8
10
1
11
12
13
14

ABB
-Welcome M
Operation
| — 9 —
6Open entrance door
- The "Open door" icon is displayed when you press the door opener or
activate the function "Automatic door opener".
7SD card
- The icon shows whether you have inserted an SD card.
8Switch actuator
- The icon is shown after you activate the switch actuator.
9Cleaning blockage
- The icon is shown when the display is blocked to prevent functions being
enabled during cleaning.
10 SOS
- Press this button for 3s to send an SOS signal to a gurad unit.
11 Surveillance
- Touch this button to start to survey the default outdoor station .
12 Intercom
- Touch this button to enter the intercom call menu.
13 Guard unit
- Touch this button to call a guard unit.
14 Switch Actuator
- Touch this button to enter the switch actuator menu.
Pos: 29 /B usc h-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Dok u me ntatio n/S teu er mod ule - Onli n e-Dok ume ntati on (-- > F ür alle D ok ume nte <- -)/ +++++ ++ +++++ S eiten umb ruch + +++ ++ +++++ + @ 9\m od_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1
Pos: 22 /B usc h-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Dok u me ntatio n/S teu er mod ule - Onli n e-Dok ume ntati on (-- > F ür alle D ok ume nte <- -)/ +++++ ++ +++++ S eiten umb ruch + +++ ++ +++++ + @ 9\m od_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1

ABB
-Welcome M
Operation
| — 10 —
Pos: 26 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ersc hrift en/2 ./B edie nak ti onen @ 2 0\m od_ 1323 262 294 281 _15. docx @ 11 191 1 @ 2 @ 1
4.2 Control actions
Pos: 27 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ersc hrift en/3 ./S pr ech- und V ideov erbi ndu ng @ 20\ mod _13 232 6236 870 0_1 5.do cx @ 1119 27 @ 3 @ 1
4.2.1 Surveillance
Pos: 28 /Di nA 4 - A nl eitu ngen Onl in e/In hal t/KN X/D o orEnt ry/83 220 -A P-x xx/S p rech - u nd Vi de over bind ung - 8 322 0-AP -xxx @ 20\ mo d_1 3232 623 418 52_ 15.d ocx @ 111 919 @ @ 1
Fig. 3 Surveillance
Touch this button to start to survey the default outdoor station. Only the video
connection appears first. Press button to activate the voice connection.
No. Function
1Designation of camera.
2Set volume with the "Plus / minus" buttons.
3If several outdoor stations or external cameras are connected.
- Select a camera with the “Forward/back” buttons
4Touch the button to set the display.
• Saturation of the display (plus and minus).
• Contrast of the display (plus and minus).
Pos: 29 /B usc h-J aeg er (Neus truk t ur)/M odul -Strukt ur/O nline -Dok u me ntatio n/S teu er mod ule - Onli n e-Dok ume ntati on (-- > F ür alle D ok ume nte <- -)/ +++++ ++ +++ ++S eiten umb ruch + +++ ++ +++++ + @ 9\m od_ 126 8898 668 093 _0. doc x @ 521 49 @ @ 1
2
3
4
1
Surveillance

ABB
-Welcome M
Operation
| — 11 —
Pos: 30 /Di nA 4 - A nl eitu ngen Onl in e/Ueb ersc hrift en/3 ./T uer oeff nen @ 2 0\mo d_1 323 263 277 453 _15. docx @ 11 193 5 @ 3 @ 1
4.2.2 Intercom
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 4 Intercom
Touch this button to enter the intercom call menu . Then, the following functions are available.
Set the intercom call lists in the “System setting-intercom setting“ menu first.
No. Functions
1The name of an intercom.
2The address of an intercom.
3The type of an intercom (external or internal).
means an external intercom from a different apartment.
means an internal intercom from the same apartment.
4 Make an intercom call.
5Back to the START screen.
4
1
Intercom
5
2 3

ABB
-Welcome M
Operation
| — 12 —
4.2.3 Calling Guard unit
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 5 Calling Guard unit
Touch the “Guard unit“ button to call a guard unit . Then, the following functions are available.
No. Functions
1Designation of a guard unit
2Set volume with the "Plus / minus" buttons.
Call Guard unit
2
1

ABB
-Welcome M
Operation
| — 13 —
4.2.4 Switch Actuator
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 6 Switch Actuator
Touch this button to enter the switch actuator menu . Then, the following functions are
available.
Set actuator lists in the “system setting-switch actuator“ menu first.
No. Functions
1The name of an actuator.
2The address of an actuator.
3Touch this button to activate the selected actuator.
4Touch this button to go back to the START screen.
Switch Actuator
4
1 2
3

ABB
-Welcome M
Operation
| — 14 —
4.2.5 Setting up the voice and video connections
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 7 Switch Actuator
The following functions are available for setting up the voice and video connections
(press the communication button):
No. Functions
1Designation of the camera.
2Set the volume with the "Plus / minus" buttons.
3On condition that several outdoor stations or external cameras are
connected, select the camera with the “Forward/back” buttons.
4 Touch the butons to set the display.
• Saturation of the display (plus and minus).
• Contrast of the display (plus and minus).
Pos: 29 /B usc h-J aeg er (Neus truk t ur)/M odul -Strukt ur/O nline -Dok u me ntatio n/S teu er mod ule - Onli n e-Dok ume ntati on (-- > F ür alle D ok ume nte <- -)/ +++++ ++ +++ ++S eiten umb ruch + +++ ++ +++++ + @ 9\m od_ 126 8898 668 093 _0. doc x @ 521 49 @ @ 1
2
3
4
1

ABB
-Welcome M
Operation
| — 15 —
4.2.6 Opening the door
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 8 Opening the door
Press the key button to activate the door opener. Then, the following function becomes
available:
No. Functions
1The "Open door" icon is displayed after you press the door opener or
activate the function "Automatic door opener".
1

ABB
-Welcome M
Operation
| — 16 —
4.2.7 Muting
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 9 Opening the door
The muting menu (mute timer) has the following functions:
No. Functions
1No call is pending:
If you press the "Mute function" while no call is pending, the bell sound of
the panel will be deactivated for a certain period.
- If calls come in during this period of time, only the video image is
displayed.
- Missed calls are displayed in the events and pictures memory .
2A call is pending:
If you press the button "Mute function" during a call, the microphone of the
panel will be deactivated until the button is pressed again.
1 2

ABB
-Welcome M
Operation
| — 17 —
4.2.8 Activating the custom function
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
1 2
3

ABB
-Welcome M
Operation
| — 18 —
Fig. 10 Activating custom function
The program button can be configured with different functions, e.g. call to guard unit,
intercom call or control switch actuator. And its default function is the release of the
2nd-lock, which is connected with terminals COM-NC-NO of an outdoor station.
If no function is assigned to the program button, there will be no action after pressing
this program button.
Only the existing intercom call list & switch actuator list can be assigned for the program
button.
No. Functions
1If the function “release 2nd-lock” is assigned to the program button , the
"Open door" icon will be displayed when you press the program button.
2If the function "control switch actuator’ is assigned to the program button,
the "Actuator" icon will be displayed when you press the program button.
3 If the function “make an intercom call” is assigned to the program button,
the call will be activated directly when you press the program button.
4If function “call guard unit” is assigned to the program button, the call will
be activated directly when you press the program button.
4

ABB
-Welcome M
Operation
| — 19 —
4.2.9 Events and picture memory / history
Pos: 31 /Di nA 4 - A nl eitu ngen Onl in e/In halt /KN X/D o orEnt ry/83 220 -A P-xx x/ Tue r o effne n - 832 20-AP -x xx @ 20\ mod_ 132 326 795 847 9_15 . docx @ 1 121 09 @ @ 1
Fig. 11 Events and picture storage / history
The panel records all events. Press the "History" button, then the last 100 events will be
displayed (prior events are overwritten).
No. Functions
1If you have activated the function "Auto snapshots activated" in the system
settings, the flashing icon in the status bar signals a newly taken snapshot.
- The symbol stops flashing when you call up the events and pictures
memory.
2Voice message
- Press the flash button to enter the voice message settings menu.
1 2

ABB
-Welcome M
Operation
| — 20 —
1 2
2
3
4