ABB i-HD H81365P A Series User manual

i
2TMD042100D0003 │02.12.2021
Product manual
ABB i-HD
H81365P.-A Mini video outdoor station

Table of contents
Product manual
2TMD042100D0003
│
2
Table of c ontents
1Notes on the instruction manual............................................................................................................4
2Safety..................................................................................................................................................4
3Intended use........................................................................................................................................4
4Environment.........................................................................................................................................5
4.1 ABB devices..............................................................................................................................5
5Product description...............................................................................................................................6
5.1 Device type ...............................................................................................................................6
5.2 Control elements........................................................................................................................7
5.3 Terminal description...................................................................................................................8
5.4 Lock type and connection...........................................................................................................9
6Technical data....................................................................................................................................10
7Mounting/Installation...........................................................................................................................11
7.1 Requirement for the electrician.................................................................................................11
7.2 Mounting.................................................................................................................................12
7.2.1 Preparation .......................................................................................................................... 12
7.2.2 Installation height.................................................................................................................. 12
7.2.3 Installation situation.............................................................................................................. 13
7.2.4 Flush-mounted installation .................................................................................................... 14
7.2.5 Cavity wall installation........................................................................................................... 15
8Commissioning...................................................................................................................................16
8.1 Configure the settings on indoor station....................................................................................16
8.1.1 Outdoor station enters engineering mode .............................................................................. 16
8.1.2 Indoor station enters engineering settings.............................................................................. 17
8.1.3 Local device settings............................................................................................................ 18
8.1.4 Lock management................................................................................................................ 20
8.1.5 Door status detection............................................................................................................ 21
8.1.6 Sound setting....................................................................................................................... 22
8.1.7 Anti-flicker setting................................................................................................................. 23
8.1.8 Card mode........................................................................................................................... 24
8.1.9 Set the function of pushbutton............................................................................................... 25
8.1.10 Time sync setting.................................................................................................................. 26
8.1.11 Compatible mode setting ...................................................................................................... 27
8.1.12 Updating the firmware........................................................................................................... 28
8.1.13 Viewing the version............................................................................................................... 29
8.1.14 Serial number....................................................................................................................... 30
8.1.15 Signature............................................................................................................................. 31
8.2 Configure the settings on PC management software.................................................................32
8.3 Card management...................................................................................................................33
9Cyber security....................................................................................................................................35
9.1 Disclaimer ...............................................................................................................................35
9.2 Performance and service .........................................................................................................35

Table of contents
Product manual
2TMD042100D0003
│
3
9.3 Deployment guideline...............................................................................................................36
9.4 Upgrading................................................................................................................................36
9.5 Backup/Restore.......................................................................................................................36
9.6 Malware prevention solution.....................................................................................................36
10 Notice................................................................................................................................................37

Notes on the instruction manual
Product manual
2TMD042100D0003
│
4
1Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place. If you pass the device on, also pass on this manual
along with it. ABB accepts no liability for any failure to observe the instructions in this manual.
2Safety
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
3Intended use
As part of the ABB i-HD system, this device can only be used with accessories from that system.

Environment
Product manual
2TMD042100D0003
│
5
4Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
– The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
4.1 ABB devices
All packaging materials and devices from ABB bear the markings and test seals for proper
disposal. Always dispose of the packing materials and electric devices and their components via
an authorized collection facility or disposal company.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description
Product manual
2TMD042100D0003
│
6
5Product description
5.1 Device type
Article
number Product ID Product name Colour Size (HxWxD)
Unit: mm
H81365P1-A 2TMA130011A0001 Mini video outdoor station,
1 button, IC, FM Aluminum alloy 105 x 180 x 43
H81365P2-A 2TMA130011A0002 Mini video outdoor station,
2 buttons, IC, FM Aluminum alloy 105 x 180 x 43

Product description
Product manual
2TMD042100D0003
│
7
5.2 Control elements
No. Description
1Ring Indicator
■Indicator flashes slowly: ringing
■Indicator flashes quickly: busy line
2Call indicator
3 Unlock indicator
4 Speaker and microphone integration
5Round pushbutton module with IC card reader
4
5
1
2
3

Product description
Product manual
2TMD042100D0003
│
8
5.3 Terminal description
No. Description
1 Connector for the sensor used for door status detection
2Connector for exit button
3Plug-in clamps (LOCK...AGND) for door opener
4Plug-in clamps (COM...NC...NO) for floating output
5 Plug-in clamps (DC+...GND) for standalone power supply
6 LAN (PoE)
7N/A
DS
NC COM NO GND DC+
LAN
1
23
4 5
6
7
LOCKAGNDEXIT

Product description
Product manual
2TMD042100D0003
│
9
5.4 Lock type and connection
Lock type Pic Operation type Voltage Wiring type
Electrical strike
lock, 12V Power on to open 12 V
⎓
/~ Type A/B
Electrical strike
lock, 24V Power on to open 24 V
⎓
/~ Type B
Electrical rim
lock, 12 V Power on to open 12 V
⎓
Type A/B
Electrical
mortise lock Power off to open 12 V
⎓
Type C
Magnetic lock Power off to open 12/24 V
⎓
Type C
AGND
GND
NO
DC+
NC
DS
LOCK
COM
EXIT
AGND
GND
NO
DC+
NC
DS
LOCK
COM
EXIT
AGND
GND
NO
DC+
NC
DS
LOCK
COM
EXIT
+
+
+
-
--
PS
PS
TypeA
Type B
Type C

Technical data
Product manual
2TMD042100D0003
│
10
6Technical data
Designation Value
Rating voltage 24 V
⎓
Operating voltage range 20-27 V
⎓
Rating current 27 V
⎓
, 310 mA
24 V
⎓
, 350 mA
Operating temperature -40 °C…+55 °C
Product dimensions 105 x 180 × 43 mm
Camera type CMOS
Camera viewing angle 104°
Power supply for door opener 15 V
⎓
, 4A impulse, max. 250 mA holding
Floating output for door opener 30 V
⎓
, 3 A
IP level IP 54
IK level IK 07

Mounting/Installation
Product manual
2TMD042100D0003
│
11
7Mounting/Installation
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
7.1 Requirement for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
– Incorrect installation endangers your life and that of the user of the electrical
system.
– Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
– Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
– Use suitable personal protective clothing.
– Use only suitable tools and measuring devices.
– Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).

Mounting/Installation
Product manual
2TMD042100D0003
│
12
7.2 Mounting
7.2.1 Preparation
Use gloves to protect yourself against cuts.
7.2.2 Installation height
1.5 m
5 feet

Mounting/Installation
Product manual
2TMD042100D0003
│
13
7.2.3 Installation situation
Note
The following installation situations must be avoided without fail to ensure
picture quality:
■Direct light
■Direct sunlight
■Extremely bright picture background
■Highly reflective walls on the opposite side of the door station

Mount
ing/Installation
Product manual
2TMD042100D0003
│
14
7.2.4 Flush-mounted installation
Product dimension
Flush-mounted with pre-installation box
105 mm
180 mm
53 mm
174 mm
99 mm 45 mm99 mm
174 mm
3
2
1
Screw shaft: 4⌀
Scre w length: 25 mm≥
Mountingscrewx4

Mounting/Installation
Product manual
2TMD042100D0003
│
15
7.2.5 Cavity wall installation
Product dimension
Mounting
105 mm
180 mm
43 mm 90 mm
168mm
92 mm
97 mm
120mm 170mm
Screw shaft: 4⌀
Screw le ngth: 25 mm≥
Mountingscrew x4
1
2
3
4
5

Commissioning
Product manual
2TMD042100D0003
│
16
8Commissioning
8.1 Configure the settings on indoor station
8.1.1 Outdoor station enters engineering mode
Note
The mini outdoor station must be in the same network with the indoor station.
Please follow the steps below,
■Power up the mini outdoor station, three indicators light green.
■After a period of time, three indicators light down.
■Hold the first pushbutton for 5 s.
■When three indicators flash green, the mini outdoor station enters the engineering mode.

Commissioning
Product manual
2TMD042100D0003
│
17
8.1.2 Indoor station enters engineering settings
On the extra screen of indoor station, click "System" to access the corresponding screen.
On the "System settings" screen, click "Engineering settings", enter the engineering password
and then click "Outdoor station settings" to access the corresponding screen.

Commissioning
Product manual
2TMD042100D0003
│
18
8.1.3 Local device settings
On the "Outdoor station settings" screen, select the device type = "2nd OS".
[1] Location = Internal
With this setting, 2nd OS is connected to the router in the apartment.

Commissioning
Product manual
2TMD042100D0003
│
19
[2] Location = External
With this setting, 2nd OS is connected to the switch outside the apartment.
Note
The external and internal types cannot be used in mixed scenarios in the same
apartment.

Commissioning
Product manual
2TMD042100D0003
│
20
8.1.4 Lock management
On the "Outdoor station settings" screen,
No. Function
1
Unlock type when swiping
Set the lock to be released when swiping.
■Default lock (default)
■Subsidiary lock.
2
Lock type
Set the lock type for the default lock and subsidiary lock.
■Lock-GND
■NO-NC-COM
■IP actuator
3
Time of unlock
Set the time for unlock
■Power lock = Lock-GND
■Signal lock = NO-NC-COM