ABB M2304 User manual

VER:1.0 │ │ 22.04.2015
ABB-Welcome
Pos: 2 /Di nA4 - Anleitung en Onlin e/Inhalt/KNX/D oorEntr y/83220-AP- xxx/Titelbl att- 8 3220-AP-xxx - ABB @ 19\mod_1323249 806476_15.doc x@ 11108 4@ @ 1
M2304
Video distributor
=== Ende der List ef ürT extmarke Cover == =

ABB-Welcome
|
—2 —
Pos: 4 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Inhalts verzeichnis (--> Für alle D okumente <--)/Inhalts verzeichnis @ 19\mod _1320649044386_15. docx@ 1 09653 @ @ 1
1Safety...............................................................................................................3
2Intended use ....................................................................................................3
3Environment.....................................................................................................3
3.1 ABB devices..........................................................................................4
4Operation .........................................................................................................5
4.1 Control elements...................................................................................5
4.2 Operating modes...................................................................................5
5Technical data..................................................................................................9
6Mounting / Installation ....................................................................................10
6.1 Requirements for the electrician .........................................................10
6.2 General installation instructions ..........................................................11
6.3 Mounting.............................................................................................12
=== Ende der Liste für Te xtmarke TOC ===

ABB-Welcome
|
—3 —
Pos: 6 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Überschrift en (--> Für alle Dokum ente <--)/1. Ebene/S - T/Sicherheit @ 18\mod _1302612791790_15. docx @ 103357@ 1 @ 1
1 Safety
Pos: 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Dokum entation/Sicherheit (--> Für all eD okumente <--)/W arnhinweise/Sicherh eit- 23 0V @ 18\m od_1302606816750 _15.docx @ 103308 @ @1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Work on the 100-240V supply system may only be performed by
authorised electricians!
–Disconnect the mains power supply prior to installation and/or
disassembly!
Pos: 8 /Busch-Ja eger( Neustruktur)/M odul-Stru ktur/Online-Dokum entation/Überschrift en (--> Für alle Dokum ente <--)/1. Ebene/A - F/Besti mmungsgemäßer Gebra uch @ 18\mod_1 302763321316_1 5.docx @ 103483 @ 1 @ 1
2 Intended use
Pos: 9/Di nA4 - Anleitung enO nline/Inhalt/KNX/D oorEntry/832 20-AP-xxx/B estimmungsg emaesser Gebra uch- 8 3220-AP-xxx-500 @ 20\mod_1 324561168699_15.d ocx@ 1 12728 @ @ 1
The M2304 video distributor is an integral part of the ABB Welcome door communication
system and operates exclusively with components from this system. Device M2304 can
be mounted easily inside flush-mounted box, or surface mounted on the wall by one
screw.
Pos: 10 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alle Do kumente <--)/1. Ebene/U - Z/Um welt@ 18 \mod_1302614158 967_15.docx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alle D okumente <--)/Hinw eise/Hinweis - Umwelt - Hinweis Elektrog eräte @ 18\mod_130276397 3434_15.docx @ 103500 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with
domestic waste.
–The device contains valuable raw materials which can be recycled.
Therefore, dispose of the device at the appropriate collecting
depot.
Pos: 12 /DinA4 - Anleitunge n Online/Ueberschrif ten/2./ABB Gera ete@ 1 9\mod_132 3162843832_15.d ocx @ 110875 @ 2 @ 1

ABB-Welcome
|
—4 —
3.1 ABB devices
Pos: 13 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/U mwelt (--> Für alle D okumente <--)/Hinw eise/Hinweis - Umwelt - ABB Elektrogerä te@ 1 9\mod_1323162745 839_15.docx @ 110867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for
proper disposal. Always dispose of the packaging material and electric devices and their
components via the authorized collecting depots and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG)
No.1907/2006)

ABB-Welcome
|
—5 —
Pos: 18 /DinA4 - Anleitunge n Online/Ueberschrif ten/1./Bedienu ng@ 1 8\mod_13026 13924165_15.doc x@ 103 365 @ 1@ 1
4 Operation
Pos: 19 /DinA4 - Anleitunge n Online/Ueberschrif ten/2./Norm aler Betrieb @ 18\mod_ 1302768820965_ 15.docx @ 103540 @ 2 @ 1
4.1 Control elements
Pos: 20 /DinA4 - Anleitunge n Online/Ueberschrif ten/3./Bedienel emente @ 20\mod_ 132326022055 9_15.docx @ 111647 @ 3 @ 1
Pos: 21 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/83 220-AP-xxx/Bedieneleme nte- 83220-AP- xxx @ 18\mod_13032 12853605_15.doc x@ 103673 @ @ 1
Fig.
1
: Overview of control buttons
No.
Functions
1
Bus in/out
2
4 outputs for indoor stations or risers
For details see “Operating modes”.
3
Terminal resistor ON / OFF.
1
2
3

ABB-Welcome
|
—6 —
In video installations or combined audio- and video- installations, the
switch must be set as 'RC on' at the last device of the line.
Pos: 22 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F ür alle Dokume nte< --)/+++++++ +++++ Seitenumbruch +++++++++ +++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @1
Pos: 22 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F ür alle Dokume nte< --)/+++++++ +++++ Seitenumbruch +++++++++ +++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @1

ABB-Welcome
|
—7 —
4.2 Control elements
A. In a building, a video distributor divides the video signal into 4 branches in
connection with the indoor stations.
B. For a residential complex, the video distributor can be used to divide the video signal into 4
risers.

ABB-Welcome
|
—8 —

ABB-Welcome
|
—9 —
Pos: 76 /DinA4 - Anleitunge n Online/Ueberschrif ten/1./Technisc heD aten @ 18\mo d_1302615863001_ 15.docx @ 103416 @ 1 @ 1
5 Technical data
Pos: 77 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/83 220-AP-xxx/Technische Daten - 83220-AP-xxx @ 18\mod_13032 12854559_15.doc x@ 10370 5@ @ 1
Designation
Value
Operating temperature
-25° C to +55° C
Storage temperature
-40° C –+70° C
Protection
IP 20
Single-wire clamps
2 x 0.28 mm² –2 x 1 mm²
Fine-wire clamps
2 x 0.28 mm² –2 x 1 mm²
Bus voltage
20-30 V
Pos: 78 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Onli ne-Dokumentation (--> F ür alle Dokume nte< --)/+++++++ +++++ Seitenumbruch +++++++++ +++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @1

ABB-Welcome
|
—10 —
Pos: 79 /Busch-Jaeg er( Neustruktur)/Mo dul-Struktur/Onlin e-Dokumentation/Üb erschriften (--> Für alle Do kumente <--)/1. Ebene/M - O /Montage / Installatio n @1 8\mod_130 2613966111_15.doc x@ 1 03373 @ 1 @ 1
6 Mounting / Installation
Pos: 80 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Do kumente <--)/Warnhin weise/Sicherheit - Ni ederspannu ngs- und230 V- Leitungen @ 18\ mod_1302617821 491_15.docx @ 10346 5@ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
–Low-voltage and 100-240 V cables must not be installed together in
a flush-mounted socket!
In case of a short-circuit there is the danger of a 100-240 V load on
the low-voltage line.
Pos: 81 /Busc h-Jaeg er (Neustr uktur)/Modul- Struktur/O nline-Doku mentation/Sich erheit (--> Für alle Do kumente <--)/Warnhin weise/Sicherheit - Fachkennt nisse@ 1 8\mod_130277 4384017_15.docx @ 103564 @ 2 @ 1
6.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
•Incorrect installation endangers your life and that of the user of the
electrical system.
•Incorrect installation can cause serious damage to property, e.g.
due to fire.
The minimum necessary expert knowledge and requirements for the
installation are as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.

ABB-Welcome
|
—11 —
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type supply network (TN system, IT system, TT system)
to secure the following power supply conditions (classic connection
to ground, protective earthing, necessary additional measures,
etc.).
Pos: 82 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/Mont age/Montage hinweise - Allgemein @ 19\ mod_13105636 70478_15.docx @ 107 743 @ 2@ 1
6.2 General installation instructions
•Terminate all branches of the wiring system via a connected bus device (e.g., indoor
station, outdoor station, system device).
•Do not install the system controller directly next to the bell transformer and other
power supplies (to avoid interference).
•Do not install the wires of the system bus together with 100-240 V wires.
•Do not use common cables for the connecting wires of the door openers and wires of
the system bus.
•Avoid bridges between different cable types.
•Use only two wires for the system bus in a four-core or multi-core cable.
•When looping, never install the incoming and outgoing bus inside the same cable.
•Never install the internal and external bus inside the same cable.

ABB-Welcome
|
—12 —
6.3 Mounting
Pos: 85.1 /DinA4 - Anleitu ngen Online/Inhalt/KN X/DoorEntry/83 220-AP-xxx/Montage - M odule/Montage - Mo ntagedose -- 83220-AP- xxx@ 1 9\mod_132325 0406848_15.docx @ 111098 @ @ 1
Device M2304 can be easily mounted in the flush-mounted box or surface mounted on the
wall by a screw.
Mounted with flush-mounted box
Mounted on the wall
Pos: 83 /Busch-J aeger (Neustru ktur)/Modul-Struktur /Online-Doku mentation/Steu ermodule - Online-D okumentation (--> F ürall eD okument e<--) /++++++++++ ++Seitenum bruch+++ +++++++++ @ 9\ mod_1268898668093 _0.docx @ 52149 @ @ 1

ABB-Welcome
Pos: 95 /DinA4 - Anleitunge n Online/Inhalt/KN X/DoorEntry/Pr ojektierung-Mer kblatt/ProjektierP os:9 7/ Busch-Jaeger (Neus truktur)/Modul-Str uktur/Online-Do kumentation/Rüc kseiten (--> Für alle Do kumente <--)/Rüc kseite- Busc h-Jaeger- Allgemein @ 20\mod_13273 20074886_15.doc x@ 13710 3@ @ 1
Notice
=== Ende der List ef ürT extmarke Bac kcover ===
We reserve the right to at all times make technical changes as well as changes to the
contents of this document without prior notice.
The detailed specifications agreed to at the time of ordering apply to all orders. ABB
accepts no responsibility for possible errors or incompleteness in this document.
We reserve all rights to this document and the topics and illustrations contained
therein. The document and its contents, or extracts thereof, must not be reproduced,
transmitted or reused by third parties without prior written consent by ABB.