ABB REACT 2 Series User manual

ABB solar inverters
Product manual
REACT 2
3.6 to 5.0 kW

- 2 -
000884AG
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be followed during the installation
and maintenance of the equipment.
SAVE THESE INSTRUCTIONS!
Keep this document in a safe place near the inverter for easy access during installation,
operation and maintenance.
THE INSTALLER MUST READ THIS DOCUMENT IN ITS ENTIRETY BEFORE INSTALLING
THIS EQUIPMENT.
Operators are required to read this manual and scrupulously follow the instructions given in
it, since ABB cannot be held responsible for damage caused to people and/or things, or the
equipment, if the conditions described below are not observed.
7KHSXUSRVHRIWKLVGRFXPHQWLVWRVXSSRUWWKHTXDOL¿HGWHFKQLFLDQZKRKDVUHFHLYHGWUDLQLQJ
and/or has demonstrated skills and knowledge in construction, to install, operate and maintain
the inverter. This manual covers only inverter, not any equipment (photovoltaic modules, external
disconnects, etc) to which it is connected.
Warranty requirements are included in the Terms and Conditions of sale included with the
inverter order.
NOTE: Any changes made to the product or to the installation conditions that hasn’t been
approved by ABB will void the warranty.
All pictures and illustrations shown in this user manual are indicatives and must be intended as
support for installation instruction only. Actual product may vary due to product enhancement.
6SHFL¿FDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH7KHODWHVWYHUVLRQRIWKLVGRFXPHQWLVDYDLODEOH
on the ABB website.
The products are designed to be connected to and to communicate information and data via a network
interface. It is the user’s sole responsibility to provide and continuously ensure a secure connection between
the product and the user’s network or any other network (as the case may be). The user shall establish
DQGPDLQWDLQDQ\DSSURSULDWHPHDVXUHVVXFKDVEXWQRWOLPLWHGWRWKHLQVWDOODWLRQRI¿UHZDOOVDSSOLFDWLRQRI
authentication measures, encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized access, interference,
LQWUXVLRQOHDNDJHDQGRUWKHIW RIGDWDRULQIRUPDWLRQ$%% DQGLWVDI¿OLDWHV DUHQRWOLDEOHIRU GDPDJHVDQG
or losses related to such security breaches, any unauthorized access, interference, intrusion, leakage and/
or theft of data or information. The data, examples and diagrams in this manual are included solely for the
concept or product description and are not to be deemed as a statement of guaranteed properties. All persons
responsible for applying the equipment addressed in this manual must satisfy themselves that each intended
application is suitable and acceptable, including that any applicable safety or other operational requirements
are complied with. In particular, any risks in applications where a system failure and/or product failure would
FUHDWHDULVNIRUKDUPWRSURSHUW\RUSHUVRQVLQFOXGLQJEXWQRWOLPLWHGWRSHUVRQDOLQMXULHVRUGHDWKVKDOOEH
the sole responsibility of the person or entity applying the equipment, and those so responsible are hereby
requested to ensure that all measures are taken to exclude or mitigate such risks. This document has been
carefully checked by ABB but deviations cannot be completely ruled out. In case any errors are detected, the
reader is kindly requested to notify the manufacturer. Other than under explicit contractual commitments, in no
event shall ABB be responsible or liable for any loss or damage resulting from the use of this manual or the
application of the equipment.

- 3 -
000884AG
Product Manual
REACT2-3.6/5.0 photovoltaic system with storage
1 - Introduction and general information
2 - Characteristics
3 - Safety and accident prevention
4 - Lifting and transport
5 - Installation
6 - Instruments
7 - Operation
8 - Maintenance
9 - Attachments
REACT2-3.6_5.0-TL-OUTD-Product Manual EN-RevA(M000044AG)
EFFECTIVE 18/10/2018
© Copyright 2018 ABB. All Rights Reserved.

- 4 -
000002FG
Warranty and supply conditions
The warranty conditions are considered to be valid if the Customer
adheres to the indications in this manual; any conditions deviating from
those described herein must be expressly agreed in the purchase order.
ABB declares that the equipment complies with the provisions of law currently in force in the
country of installation and has issued the corresponding declaration of conformity.
N ot included in the supply
ABB accepts no liability for failure to comply with the instructions for correct installation and
will not be held responsible for systems upstream or downstream of the equipment it has
supplied.
,WLVDEVROXWHO\IRUELGGHQWRPRGLI\WKHHTXLSPHQW$Q\PRGL¿FDWLRQPDQLSXODWLRQRUDOWHUDWLRQ
not expressly agreed with the manufacturer, concerning either hardware or software, shall
result in the immediate cancellation of the warranty.
The customer is fully responsible for any changes made to the system.
*LYHQ WKH FRXQWOHVV DUUD\ RI V\VWHP FRQ¿JXUDWLRQV DQG LQVWDOODWLRQ
environments possible, it is essential to check the following: adequate
spaces, suitable for housing the equipment; airborne noise produced
based on the environment; possible ÀDPPDELOLW\FRQGLWLRQV
ABB will NOT be held liable for defects or malfunctions arising from:
improperuseoftheequipment;deteriorationresultingfromtransportation
or particular environmental conditions; performing maintenance
incorrectly or not at all; tampering or unsafe repairs; use or installation by
XQTXDOL¿HGSHUVRQV
ABB is not responsible for any loss of the equipment, or part of it, which
does not take place on the basis of the regulations and laws in force in
the country of installation.
1
Introduction and general information

- 5 -
000885AG
1 - Introduction and general information
Table of Contents
I ntroduction and general information...............................................................................................4
Warranty and supply conditions...........................................................................................................4
Not included in the supply.......................................................................................................4
Table of Contents....................................................................................................................................5
Reference number index .......................................................................................................................9
Graphical representation of references.............................................................................................10
REACT2-UNO-3.6/5.0-TL (external view)............................................................................10
REACT2-BATT (external view).............................................................................................10
REACT2-UNO-3.6/5.0-TL (internal view).............................................................................11
REACT-MTR-1PH.................................................................................................................12
Meter ABB B21 .....................................................................................................................12
Meter ABB B23, B24.............................................................................................................12
Scope and target audience..................................................................................................................13
Purpose and document structure .........................................................................................13
List of appendix documents..................................................................................................13
Operator and maintenance personnel skills/prerequisites...................................................13
Symbols and signs...............................................................................................................................14
Field of use, general conditions ........................................................................................................16
Intended or allowed use........................................................................................................16
Limits in field of use...............................................................................................................16
Improper or disallowed use ..................................................................................................17
C haracteristics.................................................................................................................................18
General conditions...............................................................................................................................18
Models and range of equipment.........................................................................................................19
Identification of the equipment and manufacturer................................................................20
Communication identification label.......................................................................................21
Characteristics and technical data.....................................................................................................22
Tightening torques ................................................................................................................25
Overall dimensions REACT2-3.6/5.0-TL-OUTD ..................................................................26
Overall dimensions REACT-MTR-1PH.................................................................................27
Overall dimensions Meter ABB B21 .....................................................................................27
Overall dimensions Meter ABB B23, B24.............................................................................27
Dimensions bracket REACT2-UNO-3.6/5.0-TL....................................................................28
Dimensions bracket REACT2-BATT.....................................................................................29
Efficiency curves..................................................................................................................................30
Power limitation (Power Derating)......................................................................................................31
Power reduction due to environmental conditions................................................................31
Power reduction due to the altitude of the installation..........................................................32
Output power reduction due to the input voltage..................................................................33
Input power reduction due to the input voltage ....................................................................34
P- Q curve capability.............................................................................................................35
Characteristics of a photovoltaic generator......................................................................................36
Strings and Arrays.................................................................................................................36

- 6 -
000885AG
1 - Introduction and general information
Description of the REACT2 system....................................................................................................37
Notes on the sizing of the system.........................................................................................37
Operating diagram................................................................................................................38
Connectivity diagram ............................................................................................................39
Operating stages of the system............................................................................................40
Functionality and components of the equipment..................................................................41
Topographic diagram of the equipment................................................................................43
Safety devices.......................................................................................................................................44
Anti-Islanding ........................................................................................................................44
Ground fault of the photovoltaic panels................................................................................44
REACT2-BATT state of health (SOH) ..................................................................................44
Other safeguards..................................................................................................................44
S afety and accident prevention .....................................................................................................45
Safety information and instructions ..................................................................................................45
Hazardous areas and operations .......................................................................................................46
Environmental conditions and risks......................................................................................46
Signs and labels....................................................................................................................46
Thermal and electrical hazard ..............................................................................................47
Clothing and protection of personnel....................................................................................47
Safety precautions relating to REACT2-BATT......................................................................48
Residual risks .......................................................................................................................................50
Table of residual risks ...........................................................................................................50
L ifting and transport........................................................................................................................51
General conditions ..............................................................................................................................51
Storage of equipment...........................................................................................................................52
Special rules for storage of REACT2-BATT.........................................................................52
Lifting.....................................................................................................................................................53
Equipment weight .................................................................................................................53
Transport of the equipment.................................................................................................................54
Road transport of Battery Unit..............................................................................................54
Unpacking and checking ....................................................................................................................55
General Handling Information...............................................................................................55
List of components supplied.................................................................................................55
I nstallation .........................................................................................................................................57
General conditions ..............................................................................................................................57
Environmental checks...........................................................................................................58
Wireless signal environmental checks..................................................................................60
Installations above 2000 metres...........................................................................................61
Installations with a high level of humidity .............................................................................61
Mounting instruction - REACT2 system............................................................................................62
Mounting instruction - REACT2 multi battery system .....................................................................66
Connection of the energy meter.........................................................................................................68
Connection of the REACT-MTR-1PH (single-phase)...........................................................70
Connection and configuration of the ABB B21 meter (single-phase)...................................72
Connection and configuration of the REACT-MTR-3PH (three-phase)...............................74
Distribution grid output connection (AC side)..................................................................................76
Characteristics and sizing of the line cable ..........................................................................76
Load protection switch (AC disconnect switch)....................................................................77

- 7 -
000885AG
1 - Introduction and general information
Installation of the cable on the AC output connector............................................................77
Connection for the AC output connector to the inverter .......................................................79
Installation of the external protective grounding cable.........................................................80
BACKUP output connection (AC).......................................................................................................81
Characteristics and sizing of the cable for BACKUP output.................................................82
Load protection switch (AC disconnect switch) for BACKUP output....................................82
Connection to AC BACKUP output terminal block...............................................................82
Preliminary operations for connection of the PV generator ...........................................................83
Checking the correct polarity of the strings ..........................................................................83
Checking of leakage to ground of the photovoltaic generator..............................................83
Selection of differential protection downstream of the inverter ............................................83
Configuration of independent or parallel input channels................................................................85
Channel configuration examples..........................................................................................86
Independent channel configuration (default configuration)..................................................87
Configuration of parallel-connected channels......................................................................87
Input connection to PV generator (DC side) .....................................................................................88
Installation procedure for quick-fit connectors .....................................................................89
Communication and control signal connections .............................................................................93
External backup command connection ................................................................................94
Remote control connection...................................................................................................94
+5V output connection..........................................................................................................95
Connection of RS485 LOGGER serial communication line.................................................95
Ethernet connection..............................................................................................................97
Configurable Relay connection (OUTPUT 1 and OUTPUT 2).............................................99
I nstruments......................................................................................................................................100
General conditions ............................................................................................................................100
User interface......................................................................................................................................101
Description of the synoptic..................................................................................................101
Embedded Web User Interface..........................................................................................101
Aurora Vision Plant Management Platform........................................................................101
ABB Ability™ Energy Viewer for solar plants....................................................................102
Measurement tolerance......................................................................................................102
O peration........................................................................................................................................103
General conditions ............................................................................................................................103
Commissioning...................................................................................................................................104
Free@Home protocol activation.........................................................................................111
Synoptic icons behaviour..................................................................................................................112
Red GFI LED.......................................................................................................................113
Description of the Web User Interface.............................................................................................114
Access to the Web User Interface......................................................................................114
Web User Interface menu structure....................................................................................117
MAIN section.......................................................................................................................118
SETTING section................................................................................................................119
Inverter Log ........................................................................................................................125
USER section......................................................................................................................126
Connectivity .......................................................................................................................127
Service TOOLS ..................................................................................................................129
Information .........................................................................................................................132

- 8 -
000885AG
1 - Introduction and general information
Inverter switch-off...............................................................................................................................133
Operator and maintenance personnel skills/prerequisites.................................................133
Switch-off procedure...........................................................................................................134
M aintenance...................................................................................................................................136
General conditions ............................................................................................................................136
Routine maintenance .........................................................................................................137
Troubleshooting ..................................................................................................................137
Alarm Messages.................................................................................................................138
Power limitation messages.................................................................................................146
Procedure for dismantling of the REACT2 system ........................................................................148
Registration on website and calculation of Admin Plus password .............................................149
Verification of ground leakage .........................................................................................................152
Behaviour of a system without leakage..............................................................................152
Behaviour of a system with leakage...................................................................................153
Measuring the insulation resistance of photovoltaic generator...................................................154
Storage and dismantling ..................................................................................................................155
Storage of the equipment or prolonged stop......................................................................155
Dismantling, decommissioning and disposal......................................................................155
A ttachments...................................................................................................................................156
Port and network services used by the inverter.............................................................................156
IP Network Services............................................................................................................156
Network Hosts.....................................................................................................................157
Inverter network configuration ............................................................................................157
Further information............................................................................................................................158
Contact us...........................................................................................................................................159

- 9 -
000885AG
1 - Introduction and general information
Reference number index
01
REACT2-UNO wall bracket
30
LAN Ethernet connector (RJ45)
02
REACT2-UNO
31
Coin cell
03
Synoptic
32
DC input terminal
04
heat sink
33
Memory card
05
REACT2-UNO front cover
34
RS485-METER communication card
06
Input connectors MPPT1 (IN1)
35
RS485-PC communication card
07
DC and battery disconnect switch
36
RS485-LOGGER communication card
08
Battery communication connector COMM.[A]
37
RS485-LOGGER line termination switch
09
Battery power connector POWER [A]
38
RS485-PC line termination switch
10
REACT2-UNO wall attachment point
39
RS485-METER line termination switch
11
REACT2-UNO external protective earth
40
Communicationand control signalscrewterminal block
12
Input connectors MPPT2 (IN2)
41
Multifunctional relay screw terminal block
13
Service cable gland
42
AC output (BACKUP) screw terminal block
14
METER connector
43
AC output (GRID) screw terminal block
15
Wi-Fi antenna connector
44
Cable conduit
16
AC output (BACKUP) cable gland
50
Meter ABB B21
17
AC output (GRID) connector
51
REACT-MTR-1PH
20
REACT2-BATT wall bracket
52
Hole for line cable
21
REACT2-BATT
53
AC power supply terminal block
22
Battery communication connector COMM.[B]
54
METER RS485 screw terminal block
23
Battery power connector POWER [B]
55
METER ABB B23, B24
24
REACT2-BATT external protective earth [B]
56
Three-phase connection screw terminal block
25
REACT2-BATT external protective earth [A]
57
METER RS485 screw terminal block
26
REACT2-BATT wall attachment point

- 10 -
000885AG
1 - Introduction and general information
Graphical representation of references
R EACT2-UNO-3.6/5.0-TL (external view)
PV
BATTERY
DC SWITCH GRIDBACKUP
METER
POWER
COMM.
12
13
15
14
16
17
03
04
05
02
01
08
09
10
11
07
06
R EACT2-BATT (external view)
COMM.
[B]
POWER
[B]
COMM.
[A]
POWER
[A]
22 23 09 08
24
26
25
20
21
26

- 11 -
000885AG
1 - Introduction and general information
R EACT2-UNO-3.6/5.0-TL (internal view)
IN2
IN2IN1 IN1
METER-485
CARD PC-485
CARD LOGGER-485 CARD
RS485
LOGGER
RS485
METER
RS485
PC
+T/R
-T/R
RTN
+T/R
-T/R
RTN
N.C N.C
CC
N.O N.O
METER-485
CARD PC-485
CARD LOGGER-485 CARD
RS485
LOGGER
RS485
METER
RS485
PC
+T/R
-T/R
RTN
+T/R
-T/R
RTN
N.C N.C
CC
N.O N.O
MEMORY
CARD
33
34
35
36
37
38
39
42
43
40
41
44
31
30
32

- 12 -
000885AG
1 - Introduction and general information
R EACT-MTR-1PH
M eter ABB B21
M eter ABB B23, B24
REACT-MTR-1PH
SUTATS
ERUSAEM
INPUT :
110/230 V
50/60 Hz
10 mA max
54
53
52
51
56
5657
55
3
COMM
553
54
53
50

- 13 -
000004FG
1- Introduction and general information
Scope and target audience
P urpose and document structure
This operating and maintenance manual is a useful guide that will enable
you to work safely and carry out the operations necessary for keeping the
equipment in good working order.
,IWKHHTXLSPHQWLVXVHGLQDPDQQHUQRWVSHFL¿HGLQWKLVPDQXDOWKHSURWHFWLRQSURYLGHGE\
the equipment may be impaired.
The language in which the document was originally written is ITALIAN; therefore, in the event of
inconsistencies or doubts please ask the manufacturer for the original document.
L ist of appendix documents
In addition to this user manual and maintenance you can consult (and
download)theproductdocumentationbyvisitingwww.abbsolarinverters.
com.
Part of the information given in this document is taken from the original supplier documents.
This document contains only the information considered necessary for the use and routine
maintenance of the equipment.
O perator and maintenance personnel skills/prerequisites
Personnel in charge of using and maintaining the equipment must be skilled for the described
tasks and must reliably demonstrate their capacity to correctly interpret what is described in
the manual.
)RUVDIHW\UHDVRQVRQO\DTXDOL¿HGHOHFWULFLDQZKRKDVUHFHLYHGWUDLQLQJDQGRUGHPRQVWUDWHG
skills and knowledge of the inverter’s structure and operation may install the inverter.
7KH LQVWDOODWLRQ PXVW EH SHUIRUPHG E\ TXDOL¿HG LQVWDOOHUV DQGRU OLFHQVHG HOHFWULFLDQV LQ
accordance with the existing regulations in the country of installation.
,QYHUWHURSHUDWLRQDQGPDLQWHQDQFHE\DSHUVRQZKRLV127TXDOL¿HGLVLQWR[LFDWHGRURQ
narcotics, is strictly forbidden.
7KH FXVWRPHU KDV FLYLO OLDELOLW\ IRU WKH TXDOL¿FDWLRQ DQG PHQWDO RU SK\VLFDO VWDWH RI WKH
personnel who interact with the equipment. They must always use the personal protective
equipment (PPE) required by the laws of the country of destination and whatever is provided
by their employer.

- 14 -
000006HG
1 - Introduction and general information
Symbols and signs
In the manual and/or in some cases on the equipment, the danger or
hazard zones are indicated with signs, labels, symbols or icons.
Symbol Description
Indicates that it is mandatory to consult the manual or original document,
which must be available for future use and must not be damaged in any
way.
General warning - Important safety information. Indicates operations or
situations in which staff must be very careful.
Dangerous Voltage - Indicates operations or situations in which staff
must be very careful with regard to dangerous voltage levels.
Hot parts - Indicates a risk arising from the presence of hot zones or
zones with parts at high temperatures (risk of burns).
Risk of explosion
Risk of injury due to the weight of the equipment. Take care during lifting
and transport
Indicates that the area in question must not be accessed or that the
operation described must not be carried out.
Keep out of the reach of children
,QGLFDWHVWKDWVPRNLQJDQGWKHXVHRIQDNHGÀDPHVLVSURKLELWHG
Indicates that it is mandatory to carry out the described operations
using theclothing and/or personal protective equipment provided by the
employer.
WEEE logo. Indicates that the product is to be disposed of according to
current legislation regarding the disposal of electronic components.
IPXX Indicates the protection rating of the equipment according to IEC 70-1
(EN 60529 June 1997) standard.
Point of connection for grounding protection.
Indicates the permitted temperature range

- 15 -
000006HG
1 - Introduction and general information
Symbol Description
XX
Indicates a risk of electric shock. The discharge time of the stored
HQHUJ\UHSUHVHQWHGLQWKH¿JXUHE\WKHOHWWHUV;;LVSURYLGHGRQWKH
LGHQWL¿FDWLRQODEHO
DC
Direct Current
AC
Alternate current
With isolation transformer
Without isolation transformer
Positive pole of the input voltage (DC)
Negative pole of the input voltage (DC)
Indicates the centre of gravity of the equipment.
Indicates the requirement to wear acoustic protection devices in order to
prevent damage to hearing

- 16 -
000886AG
1 - Introduction and general information
Field of use, general conditions
ABB accepts no liability for damage of any kind that may arise from
incorrect or careless operations.
You may not use the equipment for a use that does not conform to that provided for in the
¿HOGRIXVH7KHHTXLSPHQW0867127EHXVHGE\LQH[SHULHQFHGVWDIIRUHYHQH[SHULHQFHG
staff if carrying out operations on the equipment that fail to comply with the indications in this
manual and enclosed documentation.
I ntended or allowed use
The REACT2 system is designed to optimise self-consumption in
residential contexts and consists of
5($&7812 transforms a direct current (DC) from a
photovoltaic generator (FV) into an alternating current (AC) which can
be fed into the public distribution grid.
5($&7%$77EDWWHU\XQLW temporarily stores unused energy from
the photovoltaic generator which will subsequently be used when the
energy demand from users is greater than the energy produced by the
PV generator
(QHUJ\PHWHU which measures energy at the connection point to the
grid and communicates with REACT2 in order to maximise energy self-
VXI¿FLHQF\E\PDQDJLQJWKHVWRUDJHV\VWHP
L imits in field of use
The REACT2 system can be used only with photovoltaic modules which do not require the
grounding of one of the input poles, unless accessories are installed which are compatible
with the inverter and enable this operation to be carried out. In this case you must install an
isolation transformer on the AC side of the system.
Only a photovoltaic generator consisting of class II modules (in accordance with IEC 61730)
can be connected as input to the REACT2 system (do not connect batteries or other power
sources)
The REACT2 system can be connected to the electricity grid only in countries for which it has
EHHQFHUWL¿HGDSSURYHG
The REACT2 system cannot be connected on the DC side in parallel to other inverters to
convert energy from a photovoltaic generator with a power greater than the nominal power
of the single inverter.
The REACT2 system can be used only if all the technical characteristics are observed.
Batteries other than those approved by ABB cannot be connected to the REACT2 system

- 17 -
000886AG
1 - Introduction and general information
I mproper or disallowed use
IT IS STRICTLY FORBIDDEN TO:
,QVWDOOWKHV\VWHPLQVXFKDZD\WKDWLWLVH[SRVHGWRGLUHFWVXQOLJKW
 ,QVWDOO WKH HTXLSPHQW LQ HQYLURQPHQWV ZLWK SDUWLFXODU ÀDPPDELOLW\
conditions or in environmental conditions (temperature and humidity)
RWKHUWKDQWKRVHVSHFL¿HG
8VHWKHHTXLSPHQWZLWKVDIHW\GHYLFHVZKLFKDUHIDXOW\RUGLVDEOHG
 8VH WKH HTXLSPHQW RU SDUWV RI WKH HTXLSPHQW E\ OLQNLQJ LW WR RWKHU
machines or equipment, unless expressly provided for.
0RGLI\RSHUDWLQJSDUDPHWHUVWKDWDUHQRWDFFHVVLEOHWRWKHRSHUDWRUDQG
or parts of the equipment to vary its performance or change its insulation.
&OHDQthe equipment with corrosive products that may attack parts or
generate electrostatic charges.
 8VH RU LQVWDOO WKH DSSOLDQFH RU SDUWV RI LW ZLWKRXW KDYLQJ UHDG DQG
understood the contents of the user and maintenance manual.
:DUPRUGU\UDJVDQGFORWKHVRQSDUWVDWtemperature. In addition to
being hazardous, doing so would compromise component ventilation
and cooling.
For further information on the installation conditions refer to chapter 5 “Installation”

- 18 -
000008EG
General conditions
A description of the equipment characteristics is provided to identify its
main components and specify the technical terminology used in the ma-
nual.
This chapter contains information about the models, details of the
equipment, characteristics and technical data, overall dimensions and
HTXLSPHQWLGHQWL¿FDWLRQ
The customer/Installer takes full responsibility if, when reading this manual, the chronological
order of its presentation provided is not observed. All information is provided considering
occasional inclusion of information in previous chapters.
In certain cases, there may be a need to separately document softwa-
re functionality or attach supplementary documentation to this manual
ZKLFKLVLQWHQGHGIRUPRUHTXDOL¿HGprofessionals.
2
Characteristics

- 19 -
000887AG
2 - Characteristics
Models and range of equipment
The pieces of equipment which make up the REACT2 system to which
this manual is dedicated are:
Single-phase inverter unit:
REACT2-UNO-3.6-TL single-phase, maximum output power 3600W
REACT2-UNO-5.0-TL single-phase, maximum output power 5000W
Main characteristics
1XPEHURILQSXWFKDQQHOV
,QSXWFRQQHFWRUVTXLFN¿WFRQQHFWRUVSDLUVIRUHDFKFKDQQHO
'&GLVFRQQHFWVZLWFK
:LUHOHVVRU/$1FRPPXQLFDWLRQ
0DQDJHPHQWRIH[WHUQDOORDGVWKURXJKLQWHJUDWHGUHOD\V
$&%DFNXS2XWSXWRIIJULG
Battery unit:
REACT2-BATT nominal battery capacity 4kWh
In the system up to three REACT2-BATTs can be used (maximum
capacity of the system 3x4kWh=12kWh)
Energy meter:
REACT-MTR-1PH energy meter for single-phase line
ABB B21-212 energy meter for single-phase line
ABB B23-212, B24-212 energy meter for three-phase line
7KHFKRLFHRI WKHFRPSRQHQWVIRUWKHV\VWHPPXVWEH PDGHE\DTXDOL¿HGWHFKQLFLDQZKR
knows about the installation conditions, the devices that will be installed outside the inverter
and possible integration with an existing system.
REACT-MTR-1PH
SUTATS
TSET
ERUSAEM
INPUT :
110/230 V
50/60 Hz
10 mA max

- 20 -
000887AG
2 - Characteristics
7KHODEHOVDUH127WREHKLGGHQE\IRUHLJQREMHFWVDQGSDUWVUDJVER[HVHTXLSPHQWHWF
they must be regularly cleaned and always kept in sight.
I dentification of the equipment and manufacturer
The technical data provided in this manual does not substitute the data
supplied on
WKHODEHOVDI¿[HGWRWKHHTXLSPHQW
7KHODEHOVDI¿[HGWRWKHHTXLSPHQWPXVW127EHUHPRYHGGDPDJHGVWDLQHGKLGGHQHWF
for any reason whatsoever.
The approval label contains the following information:
1. Manufacturer
2. Model
3. Rating data
&HUWL¿FDWLRQPDUNV
V dc max
I dc max
V dc Operating Range
V dc MPP
I sc max
V acr
f r
I ac max
Pacr (cos = ±0.9) φ
V acr
f r
Sacr
I ac max
MODEL:
REACT2-UNO-3.6-TL
575 V
90 - 575 V
2 x 12 A
160 - 480 V
2 x 15 A
Made in Italy
PROTECTIVE CLASS: I
230 V 1Ø
50 Hz
3200 W
3600 W
16 A
INVERTERSOLAR
www.abb.com/solar
PROTECTIVE
EARTHING
REQUIRED
230 V 1Ø
50 Hz
3000 VA
13 A
Adj. cos φ
P acr (cos = 1) φ
P ac max
IP65
5 minutes
-20 to + 55 °C
-4 to +131 °F
BACKUP OUTPUT
(1): Over/Under excited
0.1-1
(1)
BATTERY PORT
V dc Operating Range 170 - 575 V
I
dc max (charge) 13.5 A
I
dc max (discharge) 10 A
Smax 3600 VA
3
2
4
1
V dc max
I dc max
V dc Operating Range
V dc MPP
I sc max
V acr
f r
I ac max
Pacr (cos = ±0.9) φ
V acr
f r
Sacr
I ac max
MODEL:
REACT2-UNO-5.0-TL
575 V
90 - 575 V
2 x 13.5 A
195 - 480 V
2 x 15 A
Made in Italy
PROTECTIVE CLASS: I
230 V 1Ø
50 Hz
4500 W
5000 W
22 A
INVERTERSOLAR
www.abb.com/solar
PROTECTIVE
EARTHING
REQUIRED
230 V 1Ø
50 Hz
3000 VA
13 A
Adj. cos φ
P acr (cos = 1) φ
P ac max
IP65
5 minutes
-20 to + 55 °C
-4 to +131 °F
BACKUP OUTPUT
(1): Over/Under excited
0.1-1
(1)
BATTERY PORT
V dc Operating Range 170 - 575 V
I
dc max (charge) 13.5 A
I
dc max (discharge) 14 A
Smax 5000 VA
2
14
3
I dc max (charge) 4.5 A
Contains Rechargeable Li-ion Battery
- Refer to instruction manual for proper installation.
- Do not remove the cover. No user serviceable parts inside.
- Do not expose the unit to heating sources.
- Do not expose the unit to direct solar irradiation.
- Do not install or operate the unit in potentially explosive
s.atmosphere
WARNING!
www.abb.com/solar
BATTERY UNIT REACT2-BATTMODEL:
PROTECTIVE CLASS: I
Made in Italy
IP54
-20 55 (*)to + °C
-4 31 (*)to +1 °F
V dc max
575 V
W hr
4.0 kWh
I
dc max (discharge) 5.6 A
V
dc operating range 170 - 575 V
(*): Out of 0 to +40 °C (+32 to +104 °F) temperature range, power derating occurs
4
1
2
3