ACME Xperior 5R BEAM F User manual
EC Declaration of Conformity
We declare that our products (lighting equipments) comply with the
following specification and bears CE mark in accordance with the
provision of the Electromagnetic Compatibility (EMC) Directive
2004/108/EC.
EN55103-1:1996; EN55103-2:1996;
EN61000-3-2:2006
EN61000-3-3:2008
&
Harmonized Standard
EN 60598-2-17: 1989 +A2: 1991
EN60598-1:2008+A11:2009
Part 1:General requirements and test
Following the provisions of the low voltage directive 2006/95/EC
Innovation, Quality, Performance
XperiorTM 5R BEAM
User Guide
Please read these instructions carefully before use
www.bluelight.at
www.bluelight.at
EC Declaration of Conformity
We declare that our products (lighting equipments) comply with the
following specification and bears CE mark in accordance with the
provision of the Electromagnetic Compatibility (EMC) Directive
2004/108/EC.
EN55103-1:1996; EN55103-2:1996;
EN61000-3-2:2006
EN61000-3-3:2008
&
Harmonized Standard
EN 60598-2-17: 1989 +A2: 1991
EN60598-1:2008+A11:2009
Part 1:General requirements and test
Following the provisions of the low voltage directive 2006/95/EC
Innovation, Quality, Performance
XperiorTM 5R BEAM
User Guide
Please read these instructions carefully before use
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 1-
TABLE OF CONTENTS
1. Safety Instruction...................................................................................... 2
2. Installation................................................................................................. 4
3. Technical Specification ............................................................................ 5
4. Description ................................................................................................ 8
4.1 Description of the fixture...........................................................................................8
4.2 Control Panel............................................................................................................8
5. Gobo-wheel and Lamp.............................................................................. 9
5.1 Gobos-wheel.............................................................................................................9
5.2 Lamp.......................................................................................................................10
5.3 Change the Lamp...................................................................................................11
6. How To Set The Unit ............................................................................... 12
6.1 Power On Display...................................................................................................12
6.2 Main Function .........................................................................................................12
6.3. Home Position Adjustment ....................................................................................22
6.4. Error Information....................................................................................................25
7. Control By Universal DMX Controller ................................................... 26
7.1 Connection..............................................................................................................26
7.2 Channel Mode Setting............................................................................................27
7.3 Address Setting.......................................................................................................27
7.4 DMX 512 Configuration ..........................................................................................28
7.5 Lighting Library Download......................................................................................35
8. Update Software...................................................................................... 35
9. Troubleshooting...................................................................................... 36
10. Maintenance and Cleaning................................................................... 37
38-
B. Do maintain the fixtures every two months and make sure that all the screws and
terminals have been locked firmly to make sure the normal performance of the fixtures.
Negligence of maintenance would cause malfunction of the fixture.
Cleaning:
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the unit’s optics.
yClean with soft cloth and use normal glass to clean fluid.
yAlways dry the parts carefully.
yClean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 1-
TABLE OF CONTENTS
1. Safety Instruction...................................................................................... 2
2. Installation................................................................................................. 4
3. Technical Specification ............................................................................ 5
4. Description ................................................................................................ 8
4.1 Description of the fixture...........................................................................................8
4.2 Control Panel............................................................................................................8
5. Gobo-wheel and Lamp.............................................................................. 9
5.1 Gobos-wheel.............................................................................................................9
5.2 Lamp.......................................................................................................................10
5.3 Change the Lamp...................................................................................................11
6. How To Set The Unit ............................................................................... 12
6.1 Power On Display...................................................................................................12
6.2 Main Function .........................................................................................................12
6.3. Home Position Adjustment ....................................................................................22
6.4. Error Information....................................................................................................25
7. Control By Universal DMX Controller ................................................... 26
7.1 Connection..............................................................................................................26
7.2 Channel Mode Setting............................................................................................27
7.3 Address Setting.......................................................................................................27
7.4 DMX 512 Configuration ..........................................................................................28
7.5 Lighting Library Download......................................................................................35
8. Update Software...................................................................................... 35
9. Troubleshooting...................................................................................... 36
10. Maintenance and Cleaning................................................................... 37
38-
B. Do maintain the fixtures every two months and make sure that all the screws and
terminals have been locked firmly to make sure the normal performance of the fixtures.
Negligence of maintenance would cause malfunction of the fixture.
Cleaning:
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the unit’s optics.
yClean with soft cloth and use normal glass to clean fluid.
yAlways dry the parts carefully.
yClean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 37-
3. Loosen the screws (C).
4. Unplug all the connect wires over the belt.
5. Change a new belt (D), put the belt around the
axis gear and motor gear.
6. Plug all the connect wires back upon the belt.
7. Tighten all the screws.
F. If The tilt belt is broken
1. Turn off the mains power.
2. Loosen all the screws (A) and open the right
arm cover (B).
3. Loosen the screws (C) that fix the bridge.
4. Change a new belt (E). Please adjust the
tension of the belt properly. Note: do not fix
the belt too tight as it is can easily rupture.
5. Reverse the procedures from step 3 to 2.
10. Maintenance and Cleaning
Maintenance:
Ballast
A. As the pictures shown above, please replace the cable or cable joints immediately once
they’ve turned yellow.
2-
1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
yUnpack and check carefully that there is no transportation damage before using the
unit.
yThe unit is for indoor use only. Use only in a dry location.
yDo install and operate by qualified operator.
yDo not allow children to operate the fixture.
yUse safety chain when fixing the unit. Handle the unit by carrying its base instead of
head only.
yThe unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces.
yBe sure that no ventilation slots are blocked; otherwise the unit will be overheated.
yBefore operating, ensure that the voltage and frequency of power supply matches the
power requirements of the unit.
yIt’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
yMaximum ambient temperature TA: 40 . Don’t operate it℃when the temperature is
higher.
yDon’t connect the device to any dimmer pack.
yDuring initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, and it will decrease gradually
within 15 minutes.
yMake sure there are no flammable materials close to the unit while operating to avoid
fire hazard.
yExamine the power wires carefully; replace them immediately if there is any damage.
yUnit’s surface temperature may reach up to 85 . Don’t touch the housing bare℃-handed
Please read carefully the instruction manual, which includes important
information about the installation, usage and maintenance.
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 37-
3. Loosen the screws (C).
4. Unplug all the connect wires over the belt.
5. Change a new belt (D), put the belt around the
axis gear and motor gear.
6. Plug all the connect wires back upon the belt.
7. Tighten all the screws.
F. If The tilt belt is broken
1. Turn off the mains power.
2. Loosen all the screws (A) and open the right
arm cover (B).
3. Loosen the screws (C) that fix the bridge.
4. Change a new belt (E). Please adjust the
tension of the belt properly. Note: do not fix
the belt too tight as it is can easily rupture.
5. Reverse the procedures from step 3 to 2.
10. Maintenance and Cleaning
Maintenance:
Ballast
A. As the pictures shown above, please replace the cable or cable joints immediately once
they’ve turned yellow.
2-
1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
yUnpack and check carefully that there is no transportation damage before using the
unit.
yThe unit is for indoor use only. Use only in a dry location.
yDo install and operate by qualified operator.
yDo not allow children to operate the fixture.
yUse safety chain when fixing the unit. Handle the unit by carrying its base instead of
head only.
yThe unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces.
yBe sure that no ventilation slots are blocked; otherwise the unit will be overheated.
yBefore operating, ensure that the voltage and frequency of power supply matches the
power requirements of the unit.
yIt’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
yMaximum ambient temperature TA: 40 . Don’t operate it℃when the temperature is
higher.
yDon’t connect the device to any dimmer pack.
yDuring initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, and it will decrease gradually
within 15 minutes.
yMake sure there are no flammable materials close to the unit while operating to avoid
fire hazard.
yExamine the power wires carefully; replace them immediately if there is any damage.
yUnit’s surface temperature may reach up to 85 . Don’t touch the housing bare℃-handed
Please read carefully the instruction manual, which includes important
information about the installation, usage and maintenance.
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 3-
during its operation, and allow about 15 minutes for cooling the unit down before
replacing bulb or maintenance as it could be very hot.
yAvoid any inflammable liquids, water or metal objects entering the unit. Once it
happens, cut off the mains power immediately.
yDo not operate in dirty or dusty environment; do clean the fixture regularly.
yDo not touch any wire during operation as there might be a hazard of electric shock.
yAvoid power wires twist other cables.
yThe minimum distance between light output and the illuminated surface must be more
than 2.5 meters.
yDisconnect mains power before fuse/lamp replacement or servicing.
yReplace fuse/lamp only with the same type.
yIn the event of serious operating problem, stop using the unit immediately.
yNever turn on and off the unit time after time.
yThe housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
yDo not open the unit as there are no user serviceable parts inside.
yNever try to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance
center if needed.
yDisconnect the mains power if the fixture is has not been used for a long time.
yDo use the original packing materials before transporting it once again.
yTo prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
yHot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
yDo replace the bulb once it is damaged, deformed or life-expired.
yDo not look directly at the light while the bulb is on.
yNever touch bulb with bare fingers, as it is very hot after using.
yDo not start on the unit without bulb enclosure or when housing is damaged.
36-
9. Troubleshooting
Following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED to see if it can be light up or not.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if they are linked
properly.
2. If the DMX LED is on and no response to the channel, check the address settings and
DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB
of the unit or the previous one.
4. Try to use another DMX controller.
5. Check to see if the DMX cables run near or run alongside high voltage cables that may
cause damage or interference to DMX interface circuit.
C. One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor’s drive IC on the PCB might be out of condition.
D. The lamp is cutting out intermittently
1. The lamp is not working well. Check the mains voltage either too high or too low.
2. Internal temperature may be too high. Check if replacement of fan is needed on the
head.
E. If The pan belt is broken
1. Turn off the mains power.
2. Loosen the screws (A)，open the cover (B).
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 3-
during its operation, and allow about 15 minutes for cooling the unit down before
replacing bulb or maintenance as it could be very hot.
yAvoid any inflammable liquids, water or metal objects entering the unit. Once it
happens, cut off the mains power immediately.
yDo not operate in dirty or dusty environment; do clean the fixture regularly.
yDo not touch any wire during operation as there might be a hazard of electric shock.
yAvoid power wires twist other cables.
yThe minimum distance between light output and the illuminated surface must be more
than 2.5 meters.
yDisconnect mains power before fuse/lamp replacement or servicing.
yReplace fuse/lamp only with the same type.
yIn the event of serious operating problem, stop using the unit immediately.
yNever turn on and off the unit time after time.
yThe housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
yDo not open the unit as there are no user serviceable parts inside.
yNever try to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance
center if needed.
yDisconnect the mains power if the fixture is has not been used for a long time.
yDo use the original packing materials before transporting it once again.
yTo prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
yHot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
yDo replace the bulb once it is damaged, deformed or life-expired.
yDo not look directly at the light while the bulb is on.
yNever touch bulb with bare fingers, as it is very hot after using.
yDo not start on the unit without bulb enclosure or when housing is damaged.
36-
9. Troubleshooting
Following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED to see if it can be light up or not.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if they are linked
properly.
2. If the DMX LED is on and no response to the channel, check the address settings and
DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB
of the unit or the previous one.
4. Try to use another DMX controller.
5. Check to see if the DMX cables run near or run alongside high voltage cables that may
cause damage or interference to DMX interface circuit.
C. One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor’s drive IC on the PCB might be out of condition.
D. The lamp is cutting out intermittently
1. The lamp is not working well. Check the mains voltage either too high or too low.
2. Internal temperature may be too high. Check if replacement of fan is needed on the
head.
E. If The pan belt is broken
1. Turn off the mains power.
2. Loosen the screws (A)，open the cover (B).
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 35-
7.5 Lighting Library Download
The whole series of Xperior fixtures’ personalities have been built into the most widely used
consoles from Avolites, Compulite, Daslight, MA Lighting, Wholehog and Zero 88. Please
visit their websites or ours: http://www.acme.com.cn/ to download the latest Fixture
Personality Library.
To apply Xperior lighting libraries into the above mentioned consoles, please refer to the following
example:
Pearl 2008/2010 & Tiger
You will need a USB memory stick.
1. Download the installer from http://avolitesdownload.com/PersonalityLibrary/
2. Run it to extract the complete library of Pearl 2008/2010 and Pearl Tiger fixture
personalities.
3. Choose your memory stick as the install folder from the pull down list.
4. With the memory stick now plugged into the Pearl, choose the Sync Fixture option. This
option can be found on soft key E of the System->USB Stick Options menu.
5. Select the manufacturer and fixture to starting controlling.
8. Update Software
Download update file from our web site, follow the user manual of IU-01 to update the fixture via
IU-01(not included).
4-
2. Installation
Unpacking the fixture (for flight case pack only)
1.Stop the flight case via the brake sheet above the wheels.
2.Unlock the lock modules (1) and open the cover board.
3.Prop the cover board with lid bracket.
4.Take out the fixture.
5.Unlock the lock module (2) take out omega clamps.
Installation:
1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the
holder.
2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock
fasteners (3) into the holes of the base and tighten fully clockwise.
3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the
safety cable (6) through the bottom of the base and over the support.
Fig.1 Fig.2
Attention:
yAlways ensure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight without any harming
deformation.
yAlso always use a safety cable that can hold 12 times of the weight of the unit when
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 35-
7.5 Lighting Library Download
The whole series of Xperior fixtures’ personalities have been built into the most widely used
consoles from Avolites, Compulite, Daslight, MA Lighting, Wholehog and Zero 88. Please
visit their websites or ours: http://www.acme.com.cn/ to download the latest Fixture
Personality Library.
To apply Xperior lighting libraries into the above mentioned consoles, please refer to the following
example:
Pearl 2008/2010 & Tiger
You will need a USB memory stick.
1. Download the installer from http://avolitesdownload.com/PersonalityLibrary/
2. Run it to extract the complete library of Pearl 2008/2010 and Pearl Tiger fixture
personalities.
3. Choose your memory stick as the install folder from the pull down list.
4. With the memory stick now plugged into the Pearl, choose the Sync Fixture option. This
option can be found on soft key E of the System->USB Stick Options menu.
5. Select the manufacturer and fixture to starting controlling.
8. Update Software
Download update file from our web site, follow the user manual of IU-01 to update the fixture via
IU-01(not included).
4-
2. Installation
Unpacking the fixture (for flight case pack only)
1.Stop the flight case via the brake sheet above the wheels.
2.Unlock the lock modules (1) and open the cover board.
3.Prop the cover board with lid bracket.
4.Take out the fixture.
5.Unlock the lock module (2) take out omega clamps.
Installation:
1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the
holder.
2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock
fasteners (3) into the holes of the base and tighten fully clockwise.
3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the
safety cable (6) through the bottom of the base and over the support.
Fig.1 Fig.2
Attention:
yAlways ensure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight without any harming
deformation.
yAlso always use a safety cable that can hold 12 times of the weight of the unit when
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 5-
installing the fixture.
yMake absolute sure that the unit is firmly fixed in way that no vibrating or slipping would
occur during operation.
yThe equipment must be installed beyond the areas where persons may walk by or be
seated.
yThe rigging has to be operated by or under the guide of a skilled person.
3. Technical Specification
Power supply
- 100~240V, 50/60Hz
Power Consumption
- 290W
Lamp
- Philips MSD Platinum 5R (8000K)
Battery backup display
- Setting DMX address or other functions without connecting to mains power.
- Battery for LCD display charges automatically when the fixtures connects to the mains
power.
- No need to change battery.
Wireless control (for the unit with wireless receiver built-in only)
- Wirelessly controlled by W-DMX (option).
- Each W-DMX is sending out 512 channels of DMX.
- License free band of 2.45 GHz
Optical system
- High efficient Optical system.
- Delivering extremely powerful output.
- High quality lens.
Movement
- Pan: 540°
- Tilt: 270°
- Pan/Tilt moving speed adjustable.
- Automatic Pan/Tilt correction.
- Easy calibration and maintenance by magnetic home positioning.
34-
Function Reset Lamp Control
101-255 Lamp on
Lamp swtich-on passing
through the unused range and
staying 5 seconds in Lamp ON
levels.
26-100 Lamp off
Lamp swtich-off passing
through the unused range and
staying 5 seconds in Lamp OFF
levels.
0-25 No Function
128-255 Complete reset
complete reset is activated passing
through the unused range and staying
5 seconds in complete reset levels.
77-127 Pan/Tilt reset
Pan/Tilt reset is activated passing
through the unused range and staying
5 seconds in Pan/Tilt reset levels.
26-76 Effects reset
Effecting reset is activated passing
throughthe unused range and staying
5 seconds in Effects reset levels.
0-25 No Function
DimmerCurve
Function
Pan-Tilt
Function
63-255 No Function
51-62 Linear(Default)
38-50 Conventional
25-37 Normal
12-24 Fast(Default)
0-11 No Function
Ch14 Ch16
Ch15
20Channels(Mode 3)
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 5-
installing the fixture.
yMake absolute sure that the unit is firmly fixed in way that no vibrating or slipping would
occur during operation.
yThe equipment must be installed beyond the areas where persons may walk by or be
seated.
yThe rigging has to be operated by or under the guide of a skilled person.
3. Technical Specification
Power supply
- 100~240V, 50/60Hz
Power Consumption
- 290W
Lamp
- Philips MSD Platinum 5R (8000K)
Battery backup display
- Setting DMX address or other functions without connecting to mains power.
- Battery for LCD display charges automatically when the fixtures connects to the mains
power.
- No need to change battery.
Wireless control (for the unit with wireless receiver built-in only)
- Wirelessly controlled by W-DMX (option).
- Each W-DMX is sending out 512 channels of DMX.
- License free band of 2.45 GHz
Optical system
- High efficient Optical system.
- Delivering extremely powerful output.
- High quality lens.
Movement
- Pan: 540°
- Tilt: 270°
- Pan/Tilt moving speed adjustable.
- Automatic Pan/Tilt correction.
- Easy calibration and maintenance by magnetic home positioning.
34-
Function Reset Lamp Control
101-255 Lamp on
Lamp swtich-on passing
through the unused range and
staying 5 seconds in Lamp ON
levels.
26-100 Lamp off
Lamp swtich-off passing
through the unused range and
staying 5 seconds in Lamp OFF
levels.
0-25 No Function
128-255 Complete reset
complete reset is activated passing
through the unused range and staying
5 seconds in complete reset levels.
77-127 Pan/Tilt reset
Pan/Tilt reset is activated passing
through the unused range and staying
5 seconds in Pan/Tilt reset levels.
26-76 Effects reset
Effecting reset is activated passing
throughthe unused range and staying
5 seconds in Effects reset levels.
0-25 No Function
DimmerCurve
Function
Pan-Tilt
Function
63-255 No Function
51-62 Linear(Default)
38-50 Conventional
25-37 Normal
12-24 Fast(Default)
0-11 No Function
Ch14 Ch16
Ch15
20Channels(Mode 3)
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 33-
20 Channels mode 3:
Ch8
Prism movement
effect
Ch7
Frost
Ch9 Ch10 Ch12
Ch11 Ch13
Pan Tilt
Pan Fine Tilt Fine
Focus
0
255
0
255
0
255
0
255
00
255 540
00
255 270
0%
100%
0
255
20Channels(Mode 3)
Color Wheel
000-004 White
009-012 Color1
013-017 Color1+Color2
018-021 Color2
022-025 Color2+Color3
026-029 Color3
030-034 Color3+Color4
035-038 Color4
039-042 Color4+Color5
043-046 Color5
047-051 Color5+Color6
Ch1 Ch2 Ch3
Strobe Dimmer Gobo
052-055 Color6
056-059 Color6+Color7
060-063 Color7
064-068 Color7+Color8
069-072 Color8
073-076 Color8+Color9
077-081 Color9
082-085 Color9+Color10
086-089 Color10
090-093 Color10+Color11
094-098 Color11
099-102 Color11+Color12
103-106 Color12
107-110 Color12+Color13
111-115 Color13
116-119 Color13+Color14
120-123 Color14
124-127 Color14+White
252-255 Open
239-251 Random Fast Strobe
226-238 Random Medium Strobe
213-225 Random Slow Strobe
208-212 Open
207 Fast Pulsation
108 Slow Pulsation
104-107 Open
103 Fast Strobe
4 Slow Strobe
0-3 Closed
250-255 Gobo16 Shaking
244-249 Gobo15 Shaking
237-243 Gobo14 Shaking
231-236 Gobo13Shaking
224-230 Gobo12 Shaking
218-223 Gobo11 Shaking
212-217 Gobo10 Shaking
205-211 Gobo9 Shaking
199-204 Gobo8 Shaking
192-198 Gobo7 Shaking
186-191 Gobo6 Shaking
180-185 Gobo5 Shaking
173-179 Gobo4 Shaking
167-172 Gobo3 Shaking
160-166 Gobo2 Shaking
159 Fast Rotation
118 Slow Rotation
114-117 Stop
113 Slow Rotation
72 Fast Rotation
68-71 Gobo17
64-67Gobo16
60-63 Gobo15
56-59 Gobo14
52-55 Gobo13
48-51 Gobo12
44-47 Gobo11
40-43 Gobo10
36-39 Gobo9
32-35 Gobo8
28-31 Gobo7
24-27 Gobo6
20-23 Gobo5
16-19 Gobo4
12-15 Gobo3
8-11 Gobo2
4-7 Gobo1
0-3 White
0-127 Prism Excluded
128-255 Prism inserted 255 Fast Rotation
191-192 Stop
190SlowRotation
128 Fast Rotation
0-127 Index Rotation
Prism Prism Rotation
193 SlowRotation
6-
- Pan/Tilt position lock for transporting protection.
Dimmer/Shutter
- Mechanical dimmer
- Mechanical shutter and adjustable speed strobe effect
Color wheel
- Color wheel: 14 fixed colors
- Rainbow effect in both directions.
- Easy calibration and maintenance by magnetic home positioning.
Gobo wheel
- Gobo Wheel: 17 fixed gobos, index able,
- Easy calibration and maintenance by magnetic home positioning.
Prism
-8-facet rotating prism Frost
Zoom: From 1°~ 3.8°
Focus: Electronic
Cooling:
- Fan cooling
Protocols
- DMX 512
- Data input/output: 3/5 Pin XLR socket
Dimension
- 415×344×538.5mm
Weight
- 19kg
Photometric diagram
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 33-
20 Channels mode 3:
Ch8
Prism movement
effect
Ch7
Frost
Ch9 Ch10 Ch12
Ch11 Ch13
Pan Tilt
Pan Fine Tilt Fine
Focus
0
255
0
255
0
255
0
255
00
255 540
00
255 270
0%
100%
0
255
20Channels(Mode 3)
Color Wheel
000-004 White
009-012 Color1
013-017 Color1+Color2
018-021 Color2
022-025 Color2+Color3
026-029 Color3
030-034 Color3+Color4
035-038 Color4
039-042 Color4+Color5
043-046 Color5
047-051 Color5+Color6
Ch1 Ch2 Ch3
Strobe Dimmer Gobo
052-055 Color6
056-059 Color6+Color7
060-063 Color7
064-068 Color7+Color8
069-072 Color8
073-076 Color8+Color9
077-081 Color9
082-085 Color9+Color10
086-089 Color10
090-093 Color10+Color11
094-098 Color11
099-102 Color11+Color12
103-106 Color12
107-110 Color12+Color13
111-115 Color13
116-119 Color13+Color14
120-123 Color14
124-127 Color14+White
252-255 Open
239-251 Random Fast Strobe
226-238 Random Medium Strobe
213-225 Random Slow Strobe
208-212 Open
207 Fast Pulsation
108 Slow Pulsation
104-107 Open
103 Fast Strobe
4 Slow Strobe
0-3 Closed
250-255 Gobo16 Shaking
244-249 Gobo15 Shaking
237-243 Gobo14 Shaking
231-236 Gobo13Shaking
224-230 Gobo12 Shaking
218-223 Gobo11 Shaking
212-217 Gobo10 Shaking
205-211 Gobo9 Shaking
199-204 Gobo8 Shaking
192-198 Gobo7 Shaking
186-191 Gobo6 Shaking
180-185 Gobo5 Shaking
173-179 Gobo4 Shaking
167-172 Gobo3 Shaking
160-166 Gobo2 Shaking
159 Fast Rotation
118 Slow Rotation
114-117 Stop
113 Slow Rotation
72 Fast Rotation
68-71 Gobo17
64-67Gobo16
60-63 Gobo15
56-59 Gobo14
52-55 Gobo13
48-51 Gobo12
44-47 Gobo11
40-43 Gobo10
36-39 Gobo9
32-35 Gobo8
28-31 Gobo7
24-27 Gobo6
20-23 Gobo5
16-19 Gobo4
12-15 Gobo3
8-11 Gobo2
4-7 Gobo1
0-3 White
0-127 Prism Excluded
128-255 Prism inserted 255 Fast Rotation
191-192 Stop
190SlowRotation
128 Fast Rotation
0-127 Index Rotation
Prism Prism Rotation
193 SlowRotation
6-
- Pan/Tilt position lock for transporting protection.
Dimmer/Shutter
- Mechanical dimmer
- Mechanical shutter and adjustable speed strobe effect
Color wheel
- Color wheel: 14 fixed colors
- Rainbow effect in both directions.
- Easy calibration and maintenance by magnetic home positioning.
Gobo wheel
- Gobo Wheel: 17 fixed gobos, index able,
- Easy calibration and maintenance by magnetic home positioning.
Prism
-8-facet rotating prism Frost
Zoom: From 1°~ 3.8°
Focus: Electronic
Cooling:
- Fan cooling
Protocols
- DMX 512
- Data input/output: 3/5 Pin XLR socket
Dimension
- 415×344×538.5mm
Weight
- 19kg
Photometric diagram
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 7-
DMX Channels
Mode
CH
Mode 1
19-CH
Mode 2
16-CH
Mode 3
20-CH
1 PAN COLOUR WHEE COLOUR WHEEL
2 PAN FINE STOP / STROBE STOP / STROBE
3 TILT DIMMER DIMMER
4 TILT FINE STATIC GOBO
CHANGE
STATIC GOBO
CHANGE
5 PAN /TILT SPEED PRISM INSERTION PRISM INSERTION
6 FUNCTION PRISM ROTATION PRISM ROTATION
7 P/T MACRO EFFECTS
MOVEMENT
EFFECTS
MOVEMENT
8 P/T MACRO SPEE
D
FROST FROST
9 COLOR FOCUS FOCUS
10 GOBO PAN PAN
11 PRISM PAN FINE PAN FINE
12 R-PRISM TILT TILT
13 R-PRISM FINE TILT FINE TILT FINE
14 EFFECTS
MOVEMENT
FUNCTION FUNCTION
15 FOCUS RESET RESET
16 FROST LAMP CONTROL
(WITH OPTION
"LAMP DMX" ON)
LAMP CONTROL
(WITH OPTION
"LAMP DMX" ON)
17 SHUTTER PAN - TILT SPEED
18 DIMMER COLOUR SPEED
19 DIMMER FINE BEAM SPEED
20 GOBO SPEED
32-
Ch8
Prism movement
effect
Ch7
Frost
Ch9 Ch10 Ch12
Ch11 Ch13
Pan Tilt
Pan Fine Tilt Fine
Function Reset Lamp Control
101-255Lamp on
Lamp swtich-on passing
through the unused range and
staying 5 seconds in Lamp ON
levels.
26-100Lamp off
Lamp swtich-off passing
through the unused range and
staying 5 seconds in Lamp OFF
levels.
0-25 No Function
128-255 Complete reset
complete reset is activated passing
through the unused range and staying
5 seconds in complete reset levels.
77-127 Pan/Tilt reset
Pan/Tilt reset is activated passing
through the unused range and staying
5 seconds in Pan/Tilt reset levels.
26-76 Effects reset
Effecting reset is activated passing
throughtheunused range and staying
5 seconds in Effects reset levels.
0-25 No Function
Dimmer Curve
Function
Pan-Tilt
Function
63-255 No Function
51-62 Linear(Default)
38-50 Conventional
25-37 Normal
12-24 Fast(Default)
0-11 No Function
Ch14
Focus
Ch16
Ch15
0
255
0
255
0
255
0
255
00
255 540
00
255 270
0%
100%
0
255
16Channels(Mode 2)
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 7-
DMX Channels
Mode
CH
Mode 1
19-CH
Mode 2
16-CH
Mode 3
20-CH
1 PAN COLOUR WHEE COLOUR WHEEL
2 PAN FINE STOP / STROBE STOP / STROBE
3 TILT DIMMER DIMMER
4 TILT FINE STATIC GOBO
CHANGE
STATIC GOBO
CHANGE
5 PAN /TILT SPEED PRISM INSERTION PRISM INSERTION
6 FUNCTION PRISM ROTATION PRISM ROTATION
7 P/T MACRO EFFECTS
MOVEMENT
EFFECTS
MOVEMENT
8 P/T MACRO SPEE
D
FROST FROST
9 COLOR FOCUS FOCUS
10 GOBO PAN PAN
11 PRISM PAN FINE PAN FINE
12 R-PRISM TILT TILT
13 R-PRISM FINE TILT FINE TILT FINE
14 EFFECTS
MOVEMENT
FUNCTION FUNCTION
15 FOCUS RESET RESET
16 FROST LAMP CONTROL
(WITH OPTION
"LAMP DMX" ON)
LAMP CONTROL
(WITH OPTION
"LAMP DMX" ON)
17 SHUTTER PAN - TILT SPEED
18 DIMMER COLOUR SPEED
19 DIMMER FINE BEAM SPEED
20 GOBO SPEED
32-
Ch8
Prism movement
effect
Ch7
Frost
Ch9 Ch10 Ch12
Ch11 Ch13
Pan Tilt
Pan Fine Tilt Fine
Function Reset Lamp Control
101-255Lamp on
Lamp swtich-on passing
through the unused range and
staying 5 seconds in Lamp ON
levels.
26-100Lamp off
Lamp swtich-off passing
through the unused range and
staying 5 seconds in Lamp OFF
levels.
0-25 No Function
128-255 Complete reset
complete reset is activated passing
through the unused range and staying
5 seconds in complete reset levels.
77-127 Pan/Tilt reset
Pan/Tilt reset is activated passing
through the unused range and staying
5 seconds in Pan/Tilt reset levels.
26-76 Effects reset
Effecting reset is activated passing
throughtheunused range and staying
5 seconds in Effects reset levels.
0-25 No Function
Dimmer Curve
Function
Pan-Tilt
Function
63-255 No Function
51-62 Linear(Default)
38-50 Conventional
25-37 Normal
12-24 Fast(Default)
0-11 No Function
Ch14
Focus
Ch16
Ch15
0
255
0
255
0
255
0
255
00
255 540
00
255 270
0%
100%
0
255
16Channels(Mode 2)
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 31-
16 Channels mode 2:
16Channels(Mode 2)
ColorWheel
000-004 White
009-012 Color1
013-017 Color1+Color2
018-021 Color2
022-025 Color2+Color3
026-029 Color3
030-034 Color3+Color4
035-038 Color4
039-042 Color4+Color5
043-046Color5
047-051 Color5+Color6
Ch1
Ch2 Ch3
Strobe Dimmer Gobo
052-055 Color6
056-059 Color6+Color7
060-063 Color7
064-068 Color7+Color8
069-072 Color8
073-076 Color8+Color9
077-081 Color9
082-085 Color9+Color10
086-089 Color10
090-093 Color10+Color11
094-098 Color11
099-102 Color11+Color12
103-106 Color12
107-110 Color12+Color13
111-115 Color13
116-119 Color13+Color14
120-123 Color14
124-127 Color14+White
252-255 Open
239-251 Random Fast Strobe
226-238RandomMediumStrobe
213-225 Random Slow Strobe
208-212 Open
207 Fast Pulsation
108 Slow Pulsation
104-107 Open
103 Fast Strobe
4 Slow Strobe
0-3 Closed
250-255 Gobo16 Shaking
244-249 Gobo15Shaking
237-243 Gobo14 Shaking
231-236 Gobo13Shaking
224-230 Gobo12 Shaking
218-223 Gobo11 Shaking
212-217 Gobo10 Shaking
205-211 Gobo9 Shaking
199-204 Gobo8 Shaking
192-198 Gobo7 Shaking
186-191 Gobo6 Shaking
180-185 Gobo5 Shaking
173-179 Gobo4 Shaking
167-172 Gobo3 Shaking
160-166 Gobo2 Shaking
159 Fast Rotation
118 Slow Rotation
114-117 Stop
113 Slow Rotation
72 Fast Rotation
68-71 Gobo17
64-67Gobo16
60-63 Gobo15
56-59 Gobo14
52-55 Gobo13
48-51 Gobo12
44-47 Gobo11
40-43 Gobo10
36-39 Gobo9
32-35 Gobo8
28-31 Gobo7
24-27 Gobo6
20-23 Gobo5
16-19 Gobo4
12-15 Gobo3
8-11 Gobo2
4-7 Gobo1
0-3 White
0-127 Prism Excluded
128-255 Prism inserted 255 Fast Rotation
191-192 Stop
190Slow Rotation
128 Fast Rotation
0-127 Index Rotation
Prism Prism Rotation
193 Slow Rotation
8-
4. Description
4.1 Description of the fixture
5. Tilt mechanism lock and release（every 45°）
6. pan mechanism lock and release（every 90°）
Caution: The head and arm must be unlocked before operation!
4.2 Control Panel
Front view Rear view
○
1 Monitor (Batter Back-up display):
○
2LED
DMX On DMX input present
MASTER On Master Mode
SLAVE On Slave Mode
SOUND Flashing Sound activation
1.Antenna (for XP-5R BEAM WT only)
2.Front panel
3.Head
4.Arm
5.Tilt arm self-locking handle
6.pan self-locking handle
7.Handle
8.Base
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 31-
16 Channels mode 2:
16Channels(Mode 2)
ColorWheel
000-004 White
009-012 Color1
013-017 Color1+Color2
018-021 Color2
022-025 Color2+Color3
026-029 Color3
030-034 Color3+Color4
035-038 Color4
039-042 Color4+Color5
043-046Color5
047-051 Color5+Color6
Ch1
Ch2 Ch3
Strobe Dimmer Gobo
052-055 Color6
056-059 Color6+Color7
060-063 Color7
064-068 Color7+Color8
069-072 Color8
073-076 Color8+Color9
077-081 Color9
082-085 Color9+Color10
086-089 Color10
090-093 Color10+Color11
094-098 Color11
099-102 Color11+Color12
103-106 Color12
107-110 Color12+Color13
111-115 Color13
116-119 Color13+Color14
120-123 Color14
124-127 Color14+White
252-255 Open
239-251 Random Fast Strobe
226-238RandomMediumStrobe
213-225 Random Slow Strobe
208-212 Open
207 Fast Pulsation
108 Slow Pulsation
104-107 Open
103 Fast Strobe
4 Slow Strobe
0-3 Closed
250-255 Gobo16 Shaking
244-249 Gobo15Shaking
237-243 Gobo14 Shaking
231-236 Gobo13Shaking
224-230 Gobo12 Shaking
218-223 Gobo11 Shaking
212-217 Gobo10 Shaking
205-211 Gobo9 Shaking
199-204 Gobo8 Shaking
192-198 Gobo7 Shaking
186-191 Gobo6 Shaking
180-185 Gobo5 Shaking
173-179 Gobo4 Shaking
167-172 Gobo3 Shaking
160-166 Gobo2 Shaking
159 Fast Rotation
118 Slow Rotation
114-117 Stop
113 Slow Rotation
72 Fast Rotation
68-71 Gobo17
64-67Gobo16
60-63 Gobo15
56-59 Gobo14
52-55 Gobo13
48-51 Gobo12
44-47 Gobo11
40-43 Gobo10
36-39 Gobo9
32-35 Gobo8
28-31 Gobo7
24-27 Gobo6
20-23 Gobo5
16-19 Gobo4
12-15 Gobo3
8-11 Gobo2
4-7 Gobo1
0-3 White
0-127 Prism Excluded
128-255 Prism inserted 255 Fast Rotation
191-192 Stop
190Slow Rotation
128 Fast Rotation
0-127 Index Rotation
Prism Prism Rotation
193 Slow Rotation
8-
4. Description
4.1 Description of the fixture
5. Tilt mechanism lock and release（every 45°）
6. pan mechanism lock and release（every 90°）
Caution: The head and arm must be unlocked before operation!
4.2 Control Panel
Front view Rear view
○
1 Monitor (Batter Back-up display):
○
2LED
DMX On DMX input present
MASTER On Master Mode
SLAVE On Slave Mode
SOUND Flashing Sound activation
1.Antenna (for XP-5R BEAM WT only)
2.Front panel
3.Head
4.Arm
5.Tilt arm self-locking handle
6.pan self-locking handle
7.Handle
8.Base
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 9-
○
3Button
MENU To enter into, move backward or leave the menu
UP Move up in the menu
DOWN Move down in the menu
ENTER Enter the desired functions
○
4 Antenna(for XP-5R BEAM WT only)
Receive wireless signal from a wide range
○
5 DMX input/output:
For DMX 512 operation, use 3/5-pin XLR plug cable to link the units together
○
6 Power Switch:
Turns On/Off the power
○
7 Power Cable:
To connect to the mains supply
5. Gobo-wheel and Lamp
5.1 Gobos-wheel
30-
Ch11
Prism
255 Fast Rotation
190-193 Stop
189Slow Rotation
128 Fast Rotation
0-127 Index Rotation
Prism Rotation
194 Slow Rotation
Color
Ch9 Ch10
Gobo
045-046 Color10+Color11
049-050 Color11+Color12
053-054 Color12+Color13
057-058 Color13+Color14
000-002 White
005-006 Color1
007-008 Color1+Color2
009-010 Color2
011-012 Color2+Color3
013-014 Color3
015-016 Color3+Color4
017-018 Color4
019-021 Color4+Color5
022-023 Color5
024-025 Color5+Color6
026-027 Color6
028-029 Color6+Color7
030-031 Color7
032-033 Color7+Color8
034-035 Color8
036-037 Color8+Color9
038-039 Color9
040-042 Color9+Color10
043-044 Color10
047-048 Color11
051-052 Color12
055-056 Color13
059-060Color14
061-063 Color14+White
064-127 Index
112-115 Gobo14 Shaking
108-111 Gobo13 Shaking
104-107 Gobo12 Shaking
100-103 Gobo11Shaking
96-99 Gobo10 Shaking
92-95 Gobo9 Shaking
88-91 Gobo8 Shaking
84-87 Gobo7 Shaking
80-83 Gobo6 Shaking
76-79 Gobo5 Shaking
72-75 Gobo4 Shaking
68-71 Gobo3 Shaking
64-67 Gobo2 Shaking
60-63 Gobo1 Shaking
56-59 White Shaking
194 Slow Rotation
255 Fast Rotation
190-193 Stop
189 Slow Rotation
128 Fast Rotation
52-55 Gobo17
49-51Gobo16
46-48 Gobo15
43-45 Gobo14
40-42 Gobo13
37-39 Gobo12
34-36 Gobo11
31-33 Gobo10
28-30 Gobo9
25-27 Gobo8
22-24 Gobo7
19-21 Gobo6
16-18 Gobo5
13-15 Gobo4
10-12 Gobo3
7-9 Gobo2
4-6 Gobo1
0-3 White
124-127 Gobo17 Shaking
120-123 Gobo16 Shaking
116-119 Gobo15 Shaking
251-255 Prism rotation effects 28
247-250 Prism rotation effects 27
242-246 Prism rotation effects 26
237-241 Prism rotation effects 25
233-236 Prism rotation effects 24
228-232 Prism rotation effects 23
224-227 Prism rotation effects 22
219-223 Prism rotation effects 21
215-218 Prism rotation effects 20
210-214 Prism rotation effects 19
206-209 Prism rotation effects 18
201-205 Prism rotation effects 17
197-200 Prism rotation effects 16
192-196 Prism rotation effects 15
188-191 Prism rotation effects 14
183-187 Prism rotation effects 13
178-182 Prism rotation effects 12
174-177 Prism rotation effects 11
169-173 Prism rotation effects 10
165-168 Prism rotation effects 9
160-164 Prism rotation effects 8
156-159 Prism rotation effects 7
151-155 Prism rotation effects 6
147-150 Prism rotation effects 5
142-146 Prism rotation effects 4
138-141 Prism rotation effects 3
133-137Prism rotation effects 2
128-132 Prism rotation effects 1
8-127 Prism Effect
0-7 No function
Ch14
Ch13 Ch15 Ch16 Ch18
Ch17
R-Prism Fine Focus
Prism Movement
effect Frost
0
255
Shutter Dimmer
Ch19
Dimmer Fine
19
Channel mode(1)
0
255
0
255
0%
100%
0
255
248-255 Open
240-247 Strobe Random
Slow Close
132-167 Fast Close
Slow Open
131 Fast Shutter
16 Slow Shutter
8-15Open
0-7 Off
204-239 Pulse Open
and Close
168-203 Fast Open
www.bluelight.at
www.bluelight.at
XP-5R Beam
- 9-
○
3Button
MENU To enter into, move backward or leave the menu
UP Move up in the menu
DOWN Move down in the menu
ENTER Enter the desired functions
○
4 Antenna(for XP-5R BEAM WT only)
Receive wireless signal from a wide range
○
5 DMX input/output:
For DMX 512 operation, use 3/5-pin XLR plug cable to link the units together
○
6 Power Switch:
Turns On/Off the power
○
7 Power Cable:
To connect to the mains supply
5. Gobo-wheel and Lamp
5.1 Gobos-wheel
30-
Ch11
Prism
255 Fast Rotation
190-193 Stop
189Slow Rotation
128 Fast Rotation
0-127 Index Rotation
Prism Rotation
194 Slow Rotation
Color
Ch9 Ch10
Gobo
045-046 Color10+Color11
049-050 Color11+Color12
053-054 Color12+Color13
057-058 Color13+Color14
000-002 White
005-006 Color1
007-008 Color1+Color2
009-010 Color2
011-012 Color2+Color3
013-014 Color3
015-016 Color3+Color4
017-018 Color4
019-021 Color4+Color5
022-023 Color5
024-025 Color5+Color6
026-027 Color6
028-029 Color6+Color7
030-031 Color7
032-033 Color7+Color8
034-035 Color8
036-037 Color8+Color9
038-039 Color9
040-042 Color9+Color10
043-044 Color10
047-048 Color11
051-052 Color12
055-056 Color13
059-060Color14
061-063 Color14+White
064-127 Index
112-115 Gobo14 Shaking
108-111 Gobo13 Shaking
104-107 Gobo12 Shaking
100-103 Gobo11Shaking
96-99 Gobo10 Shaking
92-95 Gobo9 Shaking
88-91 Gobo8 Shaking
84-87 Gobo7 Shaking
80-83 Gobo6 Shaking
76-79 Gobo5 Shaking
72-75 Gobo4 Shaking
68-71 Gobo3 Shaking
64-67 Gobo2 Shaking
60-63 Gobo1 Shaking
56-59 White Shaking
194 Slow Rotation
255 Fast Rotation
190-193 Stop
189 Slow Rotation
128 Fast Rotation
52-55 Gobo17
49-51Gobo16
46-48 Gobo15
43-45 Gobo14
40-42 Gobo13
37-39 Gobo12
34-36 Gobo11
31-33 Gobo10
28-30 Gobo9
25-27 Gobo8
22-24 Gobo7
19-21 Gobo6
16-18 Gobo5
13-15 Gobo4
10-12 Gobo3
7-9 Gobo2
4-6 Gobo1
0-3 White
124-127 Gobo17 Shaking
120-123 Gobo16 Shaking
116-119 Gobo15 Shaking
251-255 Prism rotation effects 28
247-250 Prism rotation effects 27
242-246 Prism rotation effects 26
237-241 Prism rotation effects 25
233-236 Prism rotation effects 24
228-232 Prism rotation effects 23
224-227 Prism rotation effects 22
219-223 Prism rotation effects 21
215-218 Prism rotation effects 20
210-214 Prism rotation effects 19
206-209 Prism rotation effects 18
201-205 Prism rotation effects 17
197-200 Prism rotation effects 16
192-196 Prism rotation effects 15
188-191 Prism rotation effects 14
183-187 Prism rotation effects 13
178-182 Prism rotation effects 12
174-177 Prism rotation effects 11
169-173 Prism rotation effects 10
165-168 Prism rotation effects 9
160-164 Prism rotation effects 8
156-159 Prism rotation effects 7
151-155 Prism rotation effects 6
147-150 Prism rotation effects 5
142-146 Prism rotation effects 4
138-141 Prism rotation effects 3
133-137Prism rotation effects 2
128-132 Prism rotation effects 1
8-127 Prism Effect
0-7 No function
Ch14
Ch13 Ch15 Ch16 Ch18
Ch17
R-Prism Fine Focus
Prism Movement
effect Frost
0
255
Shutter Dimmer
Ch19
Dimmer Fine
19
Channel mode(1)
0
255
0
255
0%
100%
0
255
248-255 Open
240-247 Strobe Random
Slow Close
132-167 Fast Close
Slow Open
131 Fast Shutter
16 Slow Shutter
8-15Open
0-7 Off
204-239 Pulse Open
and Close
168-203 Fast Open
www.bluelight.at
www.bluelight.at
Other manuals for Xperior 5R BEAM F
1
Table of contents
Other ACME Light Fixture manuals
ACME
ACME LED BEAM 350 User manual
ACME
ACME Led Strobe 20 LED-ST20 User manual
ACME
ACME VB-8-10FC User manual
ACME
ACME GLAMOUR 700Z RGBY User manual
ACME
ACME COOLIE 545 User manual
ACME
ACME LPB-4P User manual
ACME
ACME MH-6616S User manual
ACME
ACME GEIST BEAM User manual
ACME
ACME Xperior 5R BEAM F User manual
ACME
ACME xperior 15R spot XP-15R SZ User manual
Popular Light Fixture manuals by other brands
SATTLER
SATTLER LUCE VERDE SLIM Assembly instruction
DTS
DTS XR8 SPOT user manual
Signtex
Signtex Moonlite LED MHE Series Installation instructions & user manual
Evolights
Evolights iQ-150S user manual
Philips
Philips Vari-lite VL3500 Wash FX Luminaries user manual
MicrohDJ
MicrohDJ LED BLADEP9 QUAD user manual