ACTi ENR-030-V5.03.01.01-AC How to use

ACTi Standalone NVR
ENR-030-V5.03.01.01-AC
Release Notes

www.acti.com
2
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Legal Notice
Disclaimer
The information contained in this document is intended for general information purposes.
ACTi Corporation shall not be liable for errors contained herein or for incidental or
consequential damages arising from the furnishing, performance, or use of this document.
The information contained herein is subject to change without notice.
Copyright
Copyright © 2003-2019 ACTi Corporation All Rights Reserved.

www.acti.com
3
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Contents
1Firmware Version 4
New Features.................................................................................4
Enhancement.................................................................................6
Issue Solved ..................................................................................6
Removed........................................................................................6
Remark ..........................................................................................6
Supported Languages....................................................................7
Supported Camera Models............................................................7
Supported Control Center..............................................................7
Supported Client Application..........................................................8
2Firmware Upgrade 9
3Download and Documentation 11
4Support 11

www.acti.com
4
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Firmware Version
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date
2019.01.16
Compatible Models
ENR-220P, ENR-221, ENR-221P, ENR-222, ENR-320P, ENR-321P,
ENR-420, ENR-421, ENR-620P, ENR-621P
New Features
1. (V5.03.01.01) Supported new model: Q970 intercom camera
2. (V5.03.01.01) Supported USB joystick from remote client.
3. (V5.03.01.01) PTZ function fully supported via local and remote UI.
4. (V5.03.01.01) Support ENR and Camera firmware auto upgrade from
Download Center by the particular time (hour, minute) every day, week
or month.
5. (V5.03.01.01) Added 16H format card UID for access control devices,
such as Q950 and Q951.
6. (V5.03.01.01) Support Audio-in function and improve the quality of
Audio function.
7. (V5.03.01.01) Supported License Plate Recognition event detection
from ACTi ALPR Server 2
8. (V5.03.01.01) Added MAS address and account setting to send ENR
messages to MGB Service SDK for MAS/MGB products integration.
9. (V5.02.03.00) Supported Q950 and Q951 door stations with card reader,
event handling, group and user management.
10.(V5.02.03.00) Support CMS future version v2.0.12
11.(V5.02.03.00) Supported PoE power budget control setting from local
site.
12.(V5.02.03.00) Supported ENR system event handling
13.(V5.02.02.02) Support CMS v2.0.11
14.(V5.02.02.02) Supported daylight saving function
15.(V5.02.02.02) Supported local fisheye dewarping for B59(A), B74(A),
B76(A), B511(A)
16.(V5.02.02.02) Added Bookmark functions in local UI
17.(V5.02.01.00) Supported Access Control devices:
ACTi:
R11-20, R11C-30, R12CP-30, R21CF-30

www.acti.com
5
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
18.(V5.02.00.00) Supported PTZ function from remote client
19.(V5.02.00.00) Supported permission control.
20.(V5.02.00.00) Supported “Add channels from NVR”function of
ECD-1000.
21.(V5.02.00.00) Supported Access Control devices:
Soyal
AR-721Ei, AR727H-V5, AR-837EFSi
PSP
AccuFACE EFR-T3L
22.(V5.02.00.00) Supported factory default function
23.(V5.01.03.01) Supported ACTi Backup Server for video recording
backup service
24.(V5.01.02) Supported double click channel to enlarge in remote site.
25.(V5.01.02) Supported Access Control event search
26.(V5.01.02) Supported new models: ENR-620P, ENR-621P
27.(V5.01.01) Added Backup/Restore and Troubleshooting pages
28.(V5.01.01) Supported the functions for access control device
* Play video stream of related camera, and access control event log in
Live and Playback page.
* Provide the user interface to new, edit, delete, and get and
synchronize card data from the same access control device.
* Support event handler of Access control devices
*Supported White List / Black List for Q950, Q951
29.(V5.01.01) Supported group/user permission control settings.
30.(V5.01.01) Supported Time Zone and Daylight Saving functions
31.(V5.01.00) Supported local DI/DO settings
32.(V5.01.00) Supported event response to trigger digital output on ENR.
33.(V5.01.00) Supported snapshot attachment for E-mail notificationevent
response
34.(V5.01.00) Supported system events, including Storage Access Error,
No recording device found, System Boot Up and S.M.A.R.T Test Failed
35.(V5.01.00) Supported export video to external storage (USB, SAMBA,
ISCSI, NFS) function
36.(V5.01.00) Supported dual streams recording
37.(V5.01.00) Network Throughput Statistics, (HDD) Recording Rate
Statistics for Storage management
38.(V5.00.21) Supported new ENR 32-channel models: ENR-321P,
ENR-421
39.(V5.00.21) Supported 4k x 3k streams on local display.

www.acti.com
6
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Enhancement
1. (v5.03.01.01) System stability improvement
Issue Solved
1. (v5.02.02.02) Connection issue when camera is using public IP address
2. (v5.01.02.01) Fix bug of quick playback on SoyalAccess Control.
Removed
1. (v5.01.03.01) Removed the SMS setting page.
Remark
1. Please connect monitor before you power on the ENR server.
2. ENR can assign DHCP IP address automatically for cameras within LAN
via LAN1 port. For this DHCP server feature, please power on ENR
completely first, then boot up cameras.
3. Please make sure IP cameras and ENR are connected to the same
network before performing Auto Add cameras operation.
4. Motion detection setting is not available when camera is in ePTZ stream
mode or channel ID 2 in dual stream mode.
5. Not support Video Loss events from the video servers
6. Not support "MD Preset” stream mode
7. Not support email attachment with snapshot via Event function if
camera resolution or compression is not supported on Local display.
8. To display on Mobile Client through ENR server only accept the camera
using H.264, H.264 video compression and 1920 x 1080 or below
resolution.
9. Some of SMTP service providers upgraded the SSL/TLS versions will
cause sending event mail problem from ENR. If you wish to use a free
webmail SMTP service, you may choose certain webmail providers
such as Yandex(https://mail.yandex.com/).
10.Please find the compatible hard disks with ACTi standalone NVR
products via ACTi Hard Disk Selector(https://www.acti.com/hddselector)
11.The video recording will include the audio from camera to ENR but
without from ENR to camera.
12.Some of user interface had not been translated completely into multiple

www.acti.com
7
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
languages yet except English.
13.The local user interface of USB joystick and digital PTZ will be available
on next firmware version.
14.The supported USB joystick included ACTi PJSK-0100 and Logitech
Extreme 3D Pro.
15.The camera firmware auto upgrade function is available for minimum
camera firmware version V6.14, V7.05, V8.03, V9.04, A2.03 and A3.03.
(If camera firmware version is V6.10~V6.13, the camera auto upgrade
function will work while the camera must connect to ENR directly via
ENR’s DHCP server.)
16.The License Plate Recognition event detection requires the monitoring
cameras exist in both ENR and ALPR Server 2. The event could be
searchable from camera event search panel. The plate number search
could be supported on future ENR firmware.
Supported Languages
Czech, Danish, English, French, German, Hungarian, Italian, Japanese,
Norwegian, Polish, Portuguese, Russian, Spanish, Thai, Turkish, Simplified
Chinese and Traditional Chinese.
Supported Camera Models
For supported ACTi cameras list, please refer to
http://www.acti.com/UnifiedSolution
For supported non-ACTi cameras list, please refer to
http://www.acti.com/3rdpartycamera
Supported Control Center
Software
Software Version
CMS2
2.0.11 or later

www.acti.com
8
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Supported Client Application
Application Name
App. Version
ACTi Mobile Client for iOS
1.0.26 or later
ACTi Mobile Client forAndroid
1.0.14 or later
VMS Workstation for 32-bit Windows
VMS Workstation for 64-bit Windows
3.0.12 or later
VMS Workstation for MAC OS
1.0.03 or later

www.acti.com
9
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Firmware Upgrade
ENR standalone NVR can be upgraded firmware from local display screen or
remote IE browser.
You may check ACTi corporate website for latest ENR firmware package and
download it. Unzip the package and save the *.upg file to a USB disk or your
client computer.
Please note that the USB disk carrying the firmware image should at least
have 200 MB free space.
Here is upgrading steps about how to upgrade the firmware image to V5.02.00
via remote client.
Step 1: Power on the ENR server.
Step 2: Unzip the ENR V5.03.01.01 firmware package and save the file.
“ENR-030-V5.03.01.01-AC.upg” in the client computer.
System Log is recorded the activities performed by logged-in Users.
ENR will not keep original System Log after firmware upgrade. If you
want to keep the log, please back up settings before firmware upgrade.
Step 3: Log in the ENR with Administrator account.
On Live screen, click “System Setup” click “Maintenance”tab 
select
“Settings Backup/Restore”click “Backup” to save the current ENR
Setting.
You can refer to “Backup / Restore settings” section in ENR System
Administrator's Manual for all details.
Step 4: Before you start to upgrade FW, please keep constant network
connection between cameras and ENR server.
Step 5: On Live screen, click “Setup” click “Maintenance”tab select
“Firmware Upgrade”.

www.acti.com
10
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Step 6: Please select the image file “ENR-030-V5.03.01.01-AC.upg”.
Step 7: After click “Submit” and confirm the system prompts, ENR will start
the upgrade process.
During upgrading, the system will
stop every other activity including
recording and event handling.
Please be noted that after upgrading has started, DO NOT cut off the
system power, network connection or remove the image file until
ENR restarts.
Step 8: The device needs 5 minutes for firmware upgrading, and the system
will auto-restart and keep the previous ENR settings after the
upgrading completes.
You may check the current firmware version on “System Setup” click
“System” tab select “Information”.

www.acti.com
11
Firmware Version: ENR-030-V5.03.01.01-AC
Release Date: 2019.01.16 Reviewed Date: 2019.01.16
Release Notes
Download and Documentation
You may check ENR products in “Standalone NVR” section on ACTi corporate
website or visit ACTi Download Center http://www.acti.com/downloadcenter
for updates or release information about this firmware and documents.
Support
If you have any question or need additional assistance, please feel free to
contact our engineers via our Customer Help Desk platform
http://www.acti.com/CHD