ActionTec GT701D User manual

Note: The DSL light may blink.
Note: If the Ethernet Light does NOT turn green, make sure the Yellow Cable is
properly connected on both ends.
1Connect the Modem to a Computer
Step1Get the DSL Modem
from your DSL Quick Start Kit and
take it out of the bag.
Step4Plug the larger end of the
Power Cord into a Power Outlet.
Step5Make sure the Power Light on
the Modem is SOLID Green.
Step6Get the Yellow C ble.
Step7Plug one end of the Yellow
C ble into the Yellow Port on the
back of the DSL Modem.
Flip this Quick Start Guide over to continue NEXT
Power
Outlet
Power
Cord
Step9Make sure that the Ethernet
light on the Modem is Green. This may
take a few moments.
Yellow Port
Yellow
Cable
Step10 Get the Bl ck or Gr y DSL
C ble from your DSL Quick Start Kit.
Step11 Plug one end of the DSL
C ble into the Gr y Po rt located on
the back of the Modem.
Step8Make sure that your com-
puter is turned on. Then, plug the
other end of the Yellow C ble
into the Ethernet Port on the
back of the computer.
An Ethernet Port looks similar to
a regular Phone Jack, but is
slightly larger.
Step12 Plug the other end of the
DSL C ble into the Phone J ck closest
to your computer.
Gray Port
Black
Cable
example of a typical inline
phone filter
Phone
Port
Black
Cable
Step13 Make sure All Devices with
the same phone number as your DSL
Line have Phone Filters. This includes
telephones, fax machines, caller ID
boxes, satellite TV receivers, TiVo
devices, and answering machines.
Note: Your Power Cord may look different.
Step2Get the Power Cord from
your DSL Quick Start Kit.
Step3Plug the smaller end of
the Power Cord into the Bl ck
Port on the back of the Modem.
Power
Cord
Black
Port
Note: If the DSL Light continues to blink, make sure you received notification
from your DSL Internet Service Provider that your DSL service has been activated.
Step14 Make sure that the Power
and DSL Lights are solid Green. This
may take up to 30 seconds.
GT701D QS12_GT704WG QS7.qxd 11/1/11 4:45 PM Page 1

2Configure the Modem
Step1Open a Web browser
( etscape avigator or Internet
Explorer, for example). In the address
bar, enter http://192.168.0.1 then
press Enter on the keyboard.
Step2The “Main Menu” screen
appears. Select Auto Configure
Your G tew y.
Quick St rt Guide
Connect the Modem to a Computer
Configure the Modem
2
1
Note: Comp tible with M cintosh, Linux nd Windows.
This Quick Start Guide will walk you through the
easy steps to set up your DSL Modem. During this
process, we’ll show you how to:
You will need the following items from your Actiontec
Quick Start Kit:
You will also need to know your DSL Username and
Password provided by your Internet Service Provider.
•DSL Modem
•Black Power Cord
•Black or Gray DSL Cable
•Yellow Cable
NEXT
DSL
Modem
Model# GT701D
Step3The “Welcome” screen
appears. Click Next.
Step4The Modem is now
detecting your Internet provider’s
settings. This process can take up
to 3 minutes.
Note: If this screen does not appear, make sure your Ethernet port is configured
for Dynamic IP.
Congr tul tions!
You have successfully installed your DSL Modem.
You can now access the Internet.
Step5In the next window, enter
the User N me nd P ssword
provided by the ISP. Click Next.
Step6The “Congratulations”
screen appears. The Power Light
flashes rapidly while the Modem
restarts, then glows SOLID Green
when fully operational. The DSL
Light will glow SOLID Green and
the Internet Light will flicker
Green indicating Internet activity.
Part o: 0530-0593-002 QS973/0808
Note: When you open your web browser you may get a page cannot be displayed
error. This is normal and will not effect the instructions in step 1.
Hint: Your Username may be your main e-mail address.
If you have any problems connecting or configuring
this device please contact our Tech Support at
1-888-436-0657
GT701D QS12_GT704WG QS7.qxd 11/1/11 4:45 PM Page 2