ADC e-sphyg 3 User manual

High-Capacity Battery Installation
Press On/Off switch at back
of unit to power off the unit.
Unplug power adapter socket
from the back of the unit.
Remove both screws with
a Philips screw driver.
Slide out back cover.
1
2
Remove the existing battery
power pack.
Please do not dispose of battery
in municipal waste.
3
#9003BAT

Slide in the battery cover back into
position and replace screws.
Plug in power adapter socket at
back of device and plug into wall
outlet. Charge battery until re-
charge indicator on main unit
turns green.
5
Download full manual at www.adctoday.com/esphyg3
6
American Diagnostic Corporation
55 Commerce Drive
Hauppauge, NY 11788 USA
1-800-ADC-2670
www.adctoday.com
IFU p/n: 93-9003BAT-00 rev 0 (09/23/2021)
Insert new battery power pack.
Make sure exposed battery
wires are tucked underneath
the battery power pack so that
the battery cover can slide
back on.
4