AddBike AddBike+ Instruction sheet

AddBike - Bel Air Camp -11 Avenue du Bel Air - 69100 VILLEURBANNE (FRANCE)
[phone] | augusto.ar[email protected]
Augusto Arteaga - Distribution Network Manager
a
d
d
-
b
i
k
e
.
c
o
m
1 - Select axle-position according to your bicycle wheel size
2 - Select gripping mechanism position according to your bicycle wheel size
Place the axle in the appropriate hole. For thru axles, use the one of the bicycle*
By default always select the highest position available
How to install the AddBike+ on your bicycle?
*through axles of 12mm and 15mm as well as 20”or 16” need adapters. See options list for more information
Please read the User’s and Installation Guide for more extensive information.
Once the rst installation is ready, it is faster to go back and forth.
You can invert the position
of the adapters to match
100mm or 110mm forks
Once you’ve selected the appropriate
position, secure the xing plaques
26’’ to 29’’
20’’ to 29’’ 16’’ to 29’’ 16’’ to 26’’ 16’’ to 20’’
20’’ to 24’’ 16’’ to 20’’

AddBike - 61 cours de la République - 69100 VILLEURBANNE (FRANCE)
[phone] | augusto.ar[email protected]
Augusto Arteaga - Distribution Network Manager
a
d
d
-
b
i
k
e
.
c
o
m
3 - Place your fork on the axle 4 - Secure the fork
Tighten the quick release by hand
but wait until the end to lock it
For braking and for control of wheels inclination
Brake handle
(left side)
Shifter
(right side)
Use the AddBike velcro
5 - Adjust the inclination of the AddBike
6 - Set-up our brake handle & shifter 7 - Secure the cables
Hold the fork between the two plaques
and rmly tighten the thumbwheel
Place both cables between the plaques
How to install the AddBike+ on your bicycle?
You may shift the position of the adjustment
nut to alter the angle of the AddBike
according to your bicycle.
Make sur the backrest of the AddBike is
slightly backwards (5°)
Don’t forget to lock the quick release
The AddBike is now ready to be used.
Make sure to read « How to try the AddBike+ for the rst time » for useful tips.