ADJ Vizi Beam Hybrid 2R User manual

Rev. 10/13
User Instructions
Vizi Beam Hybrid 2R
ADJ Products, LLC
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: [phone] / Fax: [phone]
Web: www.adj.com / E-mail: [email protected]
A.D.J. Supply Europe B.V.
Junostraat 2
6468 EW Kerkrade
Netherlands
[email protected] / www.adj.eu
Tel: [phone] / Fax: [phone]

©2013 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all afliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsufcient and negligent as-
sembly, installation, rigging, and operation of this product.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 57
Model: Vizi Beam Hybrid 2R
Voltage: 100~240V, 50/60Hz
Lamp: Philips® Platinum MSD 2R Discharge
Power Consumption: 210W
Dimensions: 16.75”(L) x 12.5”(W) x 9.25”(H)
420mm x 306mm x 289mm
Colors: 13 Plus White
Gobos: 14 + Spot
Weight: 23 Lbs. / 10 kgs.
Fuse: 5A
Duty Cycle: None
DMX: 3 DMX Channel Modes: 10 Channels,
12 Channels, or 16 Channels
Sound Active: Yes
Working Position: Any Safe, Secure Position
Warranty: 1 Year (365 days)
Please Note: Specications and improvements in the design
of this unit and this manual are subject to change without any
prior written notice.
Vizi Beam Hybrid 2R Specifications
Auto Sensing Voltage: This xture contains a electronic bal-
last, which will auto sense the voltage when it is plugged into the
power source.

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 2
Table of Contents
Unpacking......................................................................3
Introduction....................................................................3
Customer Support......................................................................3
Safety Precautions......................................................................4
Features.........................................................................5
Handling Precautions..................................................................6
Registration......................................................................6
Important Discharge Lamp Warnings.........................................7
Mounting.........................................................................8
Controls and Functions.............................................................10
DMX Set-Up..............................................................................13
System Menu............................................................................16
Error Codes...............................................................................38
Operation...............................................................................40
DMX Traits.................................................................................42
Lamp Replacement...................................................................54
Fuse Replacement....................................................................54
Cleaning..................................................................55
Trouble Shooting.......................................................................55
Warranty.........................................................................56
Specifications....................................................................57
Please see page 7 for important lamp instructions!
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 57
Vizi Beam Hybrid 2R Notes

Unpacking: Thank you for purchasing the Vizi Beam Hybrid 2R by
ADJ Products, LLC. Every Vizi Beam Hybrid 2R has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
xture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support rst.
Introduction: The Vizi Beam Hybrid 2R is a DMX intelligent, moving
head fixture. The Vizi Beam Hybrid 2R can be a 10 channel, 12 chan-
nel, or 16 Channel DMX unit. The fixture can operate in three different
operating modes; show mode, sound-active, or under DMX control.
The Vizi Beam Hybrid 2R can be used as a stand alone unit or in a
master/slave configuration. For best results use fog or special effects
smoke to enhance the beams projections.
During the initial start-up or use of this product a light smoke or
smell may arise from the unit. This is a normal process and is
cause by the heat associated with the lamp.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [email protected]
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking directly
into the light source at all times!
Vizi Beam Hybrid 2R General Information
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 3 ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 56
Vizi Beam Hybrid 2R Warranty
MANUFACTURER’S LIMITED WARRANTY
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products
to be free of manufacturing defects in material and workmanship for a prescribed period from
the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the
product is purchased within the United States of America, including possessions and
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#)
before sending back the product–please contact ADJ Products, LLC Service Department
at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All
shipping charges must be pre-paid. If the requested repairs or service (including
parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return
shipping charges only to a designated point within the United States. If the entire instrument is
sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If
any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for
loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any
manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior
written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because
not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check
up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense
with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this
warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole
discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August
15, 2012, and bear indentifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products
without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with
products described above. Except to the extent prohibited by applicable law, all implied warranties made
by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to ADJ Products, LLC Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
 •LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect Lighting, Intelligent
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing,
Lighting Stands etc. excluding LED and lamps)
 •LaserProducts=90-DayLimitedWarranty
 •L.E.D.Products=3-year(1095days)LimitedWarranty(excluding motors, PCB boards, and power
supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 day
limited warranty). Only the L.E.D.s carry a 3-year warranty

For Your Own Personal Safety, Please Read and Understand This
Manual Completely Before You Attempt To Install Or Operate
This Unit!
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 55 for cleaning details.
• Heat -This fixture should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. Objects have fallen, or liquid has been spilled into the appliance.
B. The appliance has been exposed to rain or water.
C. The appliance does not appear to operate normally or exhibits a
marked change in performance.
Vizi Beam Hybrid 2R Safety Precautions
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 4ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 55
Vizi Beam Hybrid 2R Cleaning
Vizi Beam Hybrid 2R Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the bottom panel of the unit.
2. Remove the lamp holder and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during ship-
ping be sure the lamp is push in to its socket all the way.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning
the internal and external optical lenses and mirror should be carried
out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.

• Micro-Stepping Motors for Smooth Color and Gobo Transitions
• 3 Modes of DMX-512 Protocol Compatible (10 DMX Channel
Mode, 12 DMX Channel Mode, and 16 DMX Channel Mode)
• Independent Gobo and Color Wheels
• 14 Gobos + Spot
• 12 Colors, Plus White - With Rainbow
• RDMX - Lets you set the DMX address from any DMX Controller
• 3 Operating Modes - Master/Slave; Stand Alone; Sound Active
• Internal Microphone
• Philips® Platinum MSD 2R Discharge
• Edit and Save Scenes into the Memory
• Manual Focus Lens
• 360˚/ 540˚ Pan Movement
• 270˚ Tilt Movement
• Digital Display for Address and Function Setting
Vizi Beam Hybrid 2R Features
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 5 ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 54
Fuse Replacement: Locate and remove the unit’s power cord. Once
the cord has been removed located the fuse holder located inside the
power socket. Insert a flat-head screw driver into the power socket
and gently pry out the fuse holder. Remove the bad fuse and replace
with a new one. The fuse holder has a built-in socket for a spare fuse
be sure not to confuse the spare fuse with active fuse.
Vizi Beam Hybrid 2R Lamp Replacement
Caution: Always replace with the exact same type lamp and fuse, unless
otherwise specified by an authorized ADJ service technician. Replacing
with anything other than the specified part can damage your unit and will
void your manufactures warranty.
Warning: If you continue to blow lamps or fuses, STOP using the unit.
Contact customer support for further instructions, you may have to return
the unit for servicing. Continuing to use the unit may cause serious damage.
Lamp Replacement: Caution! Never attempt to change the lamp
while the fixture is plugged in. Always disconnect the main power
and allow the unit ample time to cool before attempting to replace
the lamp. Please see page 7 for important information regarding the
discharge lamp.
1. Be sure to follow the proper handling procedures that deal with
discharge lamps.
2. Remove the three small screws (labeled A, B, & C) on the rear of
the moving head.
3. After removing the screws, gently remove the panel.
4. Carefully disconnect the two wires connected to the lamp (Pic A).
5. Next, located on the left side squeeze the lamp holding clips
togther and lift the holder (Pic B).
6. Replace the lamp with an exact match. Reassemble in reverse
order.
Pic A Pic B

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 6
The Vizi Beam Hybrid 2R carries a one year limited warranty. Please
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. The
R.A. number must be clearly written on the outside of the return pack-
age. A brief description of the problem as well as the R.A. number
must also be written down on a piece of paper and included in the
shipping carton. If the unit is under warranty, you must provide a copy
of your proof of purchase invoice. You may obtain a R.A. number by
contacting our customer support team on our toll free customer sup-
port number. All packages returned to the service department not dis-
playing a R.A. number on the outside of the package will be returned
to the shipper at the shippers cost.
Vizi Beam Hybrid 2R Product Registration
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with
the unit, for future reference.
Vizi Beam Hybrid 2R General Instructions
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modication to this unit.
Vizi Beam Hybrid 2R Handling Precautions
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 53
Vizi Beam Hybrid 2R 16 Channel DMX Mode
Channel Value Function
15 PAN/TILT MOVEMENT SPEED
0 - 225 MAX TO MIN. SPEED
226 - 235 BLACKOUT BY MOVEMENT
236 - 245 BLACKOUT BY WHEEL CHANGING
246 - 255 NO FUNCTION
16 LAMP ON/OFF, RESET & PROGRAMS
0 - 19 COLOR CHANGE NORMAL
20 - 29 COLOR CHANGE TO ANY POSITION
30 - 39 COLOR & GOBO CHANGE TO ANY
POSITION
40 - 59 LAMP ON
60 - 79 LAMP OFF
80 - 84 ALL MOTOR RESET
85 - 87 SCAN MOTOR RESET
88 - 90 COLOR MOTOR RESET
91 - 93 GOBO MOTOR RESET
94 - 96 SHUTTER/DIMMER MOTOR RESET
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE PROGRAM

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 7
Vizi Beam Hybrid 2R Important Discharge Lamp Warning
This fixture is fitted with a discharge lamp which is highly
susceptible to damage if improperly handled. Never touch
the lamp with your bare fingers as the oil from your hands
will shorten lamp life. Also, never move the fixture until the
lamps have had ample time to cool. Remember, lamps are
not covered under warranty conditions.
This unit emits intense UV radiation which is harmful to the eyes and skin. The intense
luminance of the lamp can cause severe damage to the retina. Never operate this unit
without it’s covers, these covers have been specially designed to shield against UV
radiation.
Epileptic Warning: Those suffering from epilepsy should avoid looking directly into
the lamp at all times.
Avoid switching the xture on and off repeatedly in short intervals as this will reduce
lamp life and intensity.
To achieve the intensity associated with discharge lamps, these lamps use gas sealed
in a high pressure environment to emit a brilliant output. Due to the high pressure
involved with the construction of the lamp, the lamp may explode during prolonged
extensive use. This risk is increased with age, added care is encouraged when dealing
with older lamps. Extreme caution should be used when operating this or any xture
tted with a gas discharge lamp. Never open this unit while in use.
VERY IMPORTANT: This is for your safety and the life length of the unit.The
Philips® Platinum 2R Discharge lamp has lifetime of 10,000 hours.
Because of the nature of the extreme heat associated with the Platinum 2R lamp and
the tight nature of the internal optical system it is imperative that the lamp be replaced
every 6000 hours. This is done to protect the internal optical system as well as prevent
accidental lamp explosion, which could lead to hot glass particles falling from the x-
ture. Failure to change the lamp within 300 hours of operation will result in automatic
shut down of the xture’s electronics.
At 6000 hours the display will begin to ash “Replace The Lamp” and the lamp will
icker for the rst ve minutes of operation. At this point the lamp has reached the
maximum rated life and should be replaced immediately. After the lamp has ickered
for about ve minutes it should strike normally allowing the xture to be used tempo-
rarily until a replacement lamp can be installed. The xture will continue to operate
for an additional 300 hours, however the “Replace the Lamp” warning will continue
to ash in the display. Keep in mind that the icker protection circuitry will only work
for about 300 hours (lamp clock life of 6000-6300 hours). After 6300 hours the xture
will no longer respond to DMX commands and immediately enter a hibernation mode
that will electronically discontinue all xture functionality with the exception of a few
menu commands. The xture will continue to enter hibernation mode until the lamp
is replaced and the lamp clock has been reset. See page 22 to Clear the lamp time.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 52
Vizi Beam Hybrid 2R 16 Channel DMX Mode
Channel Value Function
9 PRISM/GOBO MACROS
152 - 159 MACRO 4
160 - 167 MACRO 5
168 - 175 MACRO 6
176 - 183 MACRO 7
184 - 191 MACRO 8
192 - 199 MACRO 9
200 - 207 MACRO 10
208 - 215 MACRO 11
216 - 223 MACRO 12
224 - 231 MACRO 13
232 - 239 MACRO 14
240 - 247 MACRO 15
248 - 255 MACRO 16
10 PRISM ROTATION
0 - 127 PRISM INDEXING
128 - 189 FORWARD PRISM ROTATION
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARD PRISM ROTATION
SLOW - FAST
11 0 - 255 PRISM ROTATION INDEXING
12 SHUTTER & STROBE
0 - 31 SHUTTER CLOSED
32 - 63 SHUTTER OPEN
64 - 95 STROBING SLOW - FAST
96 - 127 SHUTTER OPEN
128 - 159 PULSE EFFECT IN SEQUENCES
160 - 191 SHUTTER OPEN
192 - 223 RANDOM STROBE SLOW - FAST
224 - 255 SHUTTER OPEN
13 0 - 255 MASTER DIMMER 0% - 100%
14 0 - 255 FINE DIMMER INTENSITY

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 8
The Vizi Beam Hybrid 2R is fully operational in two different mounting
positions, hanging upside-down from a ceiling or set on a at level
surface. To avoid internal damage to the unit, never mount the unit on
its side as illustrated above. Be sure this xture is kept at least 0.5m
away from any ammable materials (decoration etc.). Always use
and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injury in the event the clamp fails (see next
page). Never use the carrying handles for secondary attachment.
Vizi Beam Hybrid 2R Mounting
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 51
Vizi Beam Hybrid 2R 16 Channel DMX Mode
Channel Value Function
7 GOBOS
48 - 55 GOBO 6
56 - 63 GOBO 7
64 - 71 GOBO 8
72 - 79 GOBO 9
80 - 87 GOBO 10
88 - 95 GOBO 11
96 - 103 GOBO 12
104 - 111 GOBO 13
112 - 119 GOBO 14
120 - 126 GOBO 1 SHAKE
127 - 133 GOBO 2 SHAKE
134 - 140 GOBO 3 SHAKE
141 - 147 GOBO 4 SHAKE
148 - 154 GOBO 5 SHAKE
155 - 161 GOBO 6 SHAKE
162 - 168 GOBO 7 SHAKE
169 - 175 GOBO 8 SHAKE
176 - 182 GOBO 9 SHAKE
183 - 189 GOBO 10 SHAKE
190 - 196 GOBO 11 SHAKE
197 - 203 GOBO 12 SHAKE
204 - 210 GOBO 13 SHAKE
211 - 217 GOBO 14 SHAKE
218 - 255 GOBO WHEEL ROTATION
SLOW - FAST
8 0 - 255 FIXED GOBO FINE INDEXING
9 PRISM/GOBO MACROS
0 - 31 OPEN
32 - 79 5 FACET PRISM
80 - 127 8 FACET PRISM
128 - 135 MACRO 1
136 - 143 MACRO 2
144 - 151 MACRO 3

Screw one clamp each via a M12 screw and nut onto the
Omega holders. Insert the quick-lock fasteners of the rst
Omega holder into the respective holes on the bottom of the
Vizi Beam Hybrid 2R. Tighten the quick-lock fasteners fully
clockwise. Install the second Omega holder. Pull the safety-
cable through the holes on the bottom of the base and over
the trussing system or a safe xation spot. Insert the end in the
carabine and tighten the safety screw.
Vizi Beam Hybrid 2R Mounting
NOTICE: The suitable enviromental temperature for this light-
ing xture is between -25˚ C to 45˚ C. Do not place this lighting
xture in an enviroment where the temperatures are under or
above the temperatures stated above. This will allow the xture
to run at its best and help prolong the xture life.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 9 ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 50
Vizi Beam Hybrid 2R 16 Channel DMX Mode
Channel Value Function
1 0 - 255 PAN MOVEMENT 8bit
2 0 - 255 PAN FINE 16bit
3 0 - 255 TILT MOVEMENT 8bit
4 0 - 255 TILT FINE 16bit
5 COLOR WHEEL
0 - 8 OPEN
9 - 17 COLOR 1
18 - 26 COLOR 2
27 - 35 COLOR 3
36 - 44 COLOR 4
45 - 53 COLOR 5
54 - 62 COLOR 6
63 - 71 COLOR 7
72 - 80 COLOR 8
81 - 89 COLOR 9
90 - 98 COLOR 10
99 - 107 COLOR 11
108 - 116 COLOR 12
117 - 127 COLOR 13
128 - 189 FORWARD RAINBOW EFFECT
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARDS RAINBOW EFFECT
SLOW - FAST
6 COLOR WHEEL FINE
0 - 255 COLOR WHEEL CHANGE FINE
GOBOS
7 0 - 7 OPEN
8 - 15 GOBO 1
16 - 23 GOBO 2
24 - 31 GOBO 3
32 - 39 GOBO 4
40 - 47 GOBO 5

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 10
Vizi Beam Hybrid 2R Controls and Functions
REAR
FRONT
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 49
Vizi Beam Hybrid 2R 12 Channel DMX Mode
Channel Value Function
12 LAMP ON/OFF, RESET & PROGRAMS
0 - 19 COLOR CHANGE NORMAL
20 - 29 COLOR CHANGE TO ANY POSITION
30 - 39 COLOR & GOBO CHANGE TO ANY
POSITION
40 - 59 LAMP ON
60 - 79 LAMP OFF
80 - 84 ALL MOTOR RESET
85 - 87 SCAN MOTOR RESET
88 - 90 COLOR MOTOR RESET
91 - 93 GOBO MOTOR RESET
94 - 96 SHUTTER/DIMMER MOTOR RESET
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE PROGRAM

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 11
Vizi Beam Hybrid 2R Controls and Functions
1. Lens Assembly - A high quality lens.
2. Digital Display - This display shows the menu and operating func-
tions that you can choose from.
3. Microphone - This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
4. Left Button - This button is used to move to the left when navigat-
ing through the system menu.
5. Down Button - This button is used to scroll backwards when navi-
gating through the system menu.
6. Right Button - This button is used to move to the right when navi-
gating through the system menu.
7. Mode/Esc Button - This button is used to enter the main menu and
submenus. It is also used to exit.
8. Up Button - This button is used to scroll forwards when navigating
through the system menu.
9. Enter Button - This button is used to select and conrm a function
in the system menu.
10. Carrying Handles - The includes built-in carrying handles. Be
sure to always handle the unit by the built-in handles. Never lift or car-
rying the unit by head or yoke. Pulling on or transporting the unit by
the moving head may severely damage the unit and will void the unit
warranty.
11. Lamp Assembly and Access Plate - This plate accesses the
lamp socket assembly. The unit includes a spring mounted discharge
lamp. Be sure to only replace with same type lamp. After replacing a
lamp be sure the lamp is centered in the reector. See pages 52-53 for
details on installing and optimizing replacement lamps. Never operate
this unit with the lamp exposed, this lamp emits strong UV radiation.
Please see page 7 for important information about the Philips® Plati-
num 5R discharge lamp.
12. XLR DMX Input Jack - This jack is used to receive an incoming
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 48
Vizi Beam Hybrid 2R 12 Channel DMX Mode
Channel Value Function
7 PRISM/GOBO MACROS
176 - 183 MACRO 7
184 - 191 MACRO 8
192 - 199 MACRO 9
200 - 207 MACRO 10
208 - 215 MACRO 11
216 - 223 MACRO 12
224 - 231 MACRO 13
232 - 239 MACRO 14
240 - 247 MACRO 15
248 - 255 MACRO 16
8 PRISM ROTATION
0 - 127 PRISM INDEXING
128 - 189 FORWARD PRISM ROTATION
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARD PRISM ROTATION
SLOW - FAST
9 SHUTTER & STROBE
0 - 31 SHUTTER CLOSED
32 - 63 SHUTTER OPEN
64 - 95 STROBING SLOW - FAST
96 - 127 SHUTTER OPEN
128 - 159 PULSE EFFECT IN SEQUENCES
160 - 191 SHUTTER OPEN
192 - 223 RANDOM STROBE SLOW - FAST
224 - 255 SHUTTER OPEN
10 DIMMER
0 - 255 INTENSITY 0% - 100%
11 PAN/TILT MOVEMENT SPEED
0 - 225 MAX TO MIN. SPEED
226 - 235 BLACKOUT BY MOVEMENT
236 - 245 BLACKOUT BY WHEEL CHANGING
246 - 255 NO FUNCTION

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 12
Vizi Beam Hybrid 2R Controls and Functions
DMX signal or Master/Slave signal.
13. XLR Output Jack - This jack is used to transmit the incoming
DMX signal to another DMX xture, or transmit a Master/Slave signal
to the next Vizi Beam Hybrid 2R in the chain. For best results in DMX or
Master/Slave mode terminate this jack if it is the last unit in the chain.
See “Line Termination” on page 14.
14. Power Cord Inlet - This cord is designed to match the electri-
cal requirements of the unit. Voltage may vary from venue to venue,
when connecting this unit to a power supply be sure to connect to a
matching power outlet. Never use this xture if the ground prong has
been removed or broken off. The ground prong is designed to reduce
the risk of re or electrical shock in the event the unit suffers from an
internal short.
Fuse Holder - This housing stores a 5 amp protective fuse. Never
defeat the fuse, the fuse is designed to protect the electronics in the
event of severe power uctuations. Always be sure to replace the fuse
with an exact match as the one being replaced, unless otherwise told
to do so by an authorized ADJ service technician.
15. Power Switch & Fuse Holder - This switches the power to the
xture “On” & “Off”.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 47
Vizi Beam Hybrid 2R 12 Channel DMX Mode
Channel Value Function
6 GOBOS CONT.
64 - 71 GOBO 8
72 - 79 GOBO 9
80 - 87 GOBO 10
88 - 95 GOBO 11
96 - 103 GOBO 12
104 - 111 GOBO 13
112 - 119 GOBO 14
120 - 126 GOBO 1 SHAKE
127 - 133 GOBO 2 SHAKE
134 - 140 GOBO 3 SHAKE
141 - 147 GOBO 4 SHAKE
148 - 154 GOBO 5 SHAKE
155 - 161 GOBO 6 SHAKE
162 - 168 GOBO 7 SHAKE
169 - 175 GOBO 8 SHAKE
176 - 182 GOBO 9 SHAKE
183 - 189 GOBO 10 SHAKE
190 - 196 GOBO 11 SHAKE
197 - 203 GOBO 12 SHAKE
204 - 210 GOBO 13 SHAKE
211 - 217 GOBO 14 SHAKE
218 - 255 GOBO WHEEL ROTATION
SLOW - FAST
7 PRISM/GOBO MACROS
0 - 31 OPEN
32 - 79 5 FACET PRISM
80 - 127 8 FACET PRISM
128 - 135 MACRO 1
136 - 143 MACRO 2
144 - 151 MACRO 3
152 - 159 MACRO 4
160 - 167 MACRO 5
168 - 175 MACRO 6

Power Supply: The ADJ Vizi Beam Hybrid 2R contains a electronic
ballast, which will auto sense the voltage when it is plugged into the
power source. With the electronic ballast you do not need to worry
about wall voltage, this unit can be plugged in anywhere.
DMX-512: DMX is short for Digital Multiplex. This is a universal pro-
tocol used by most lighting and controller manufactures as a form of
communication between intelligent fixtures and controllers. A DMX
controller sends DMX data instructions from the controller to the fix-
ture. DMX data is sent as serial data that travels from fixture to fixture
via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX
fixtures (most controllers only have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models
of different manufactures to be linked together and operate from a
single controller, as long as all xtures and the controller are DMX
compliant. To ensure proper DMX data transmission, when using
several DMX fixtures try to use the shortest cable path possible. The
order in which fixtures are connected in a DMX line does not influence
the DMX addressing. For example; a fixture assigned a DMX address
of 1 may be placed anywhere in a DMX line, at the beginning, at the
end, or anywhere in the middle. Therefore, the first fixture controlled
by the controller could be the last fixture in the chain. When a fixture
is assigned a DMX address of 1, the DMX controller knows to send
DATA assigned to address 1 to that unit, no matter where it is located
in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX and Master/Slave
Operation): The Vizi Beam Hybrid 2R can be controlled via DMX-512
protocol. The Vizi Beam Hybrid 2R can be either a 10, 12, or 16 channel
DMX unit. The DMX address is set electronically using the controls on
the front panel of the unit. Your unit and your DMX
controller require a approved DMX-512 110 Ohm
Data cable for data input and data output (Figure
1). We recommend Accu-Cable DMX cables. If you
are making your own cables, be sure to use stan-
dard 110-120 Ohm shielded cable (This cable may
be purchased at almost all professional sound and
lighting stores). Your cables should be made with
a male and female XLR connector on either end of the cable. Also
Vizi Beam Hybrid 2R Set Up
Figure 1
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 13 ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 46
Vizi Beam Hybrid 2R 12 Channel DMX Mode
Channel Value Function
1 0 - 255 PAN MOVEMENT 8bit
2 0 - 255 PAN FINE 16bit
3 0 - 255 TILT MOVEMENT 8bit
4 0 - 255 TILT FINE 16bit
5 COLOR WHEEL
0 - 8 OPEN
9 - 17 COLOR 1
18 - 26 COLOR 2
27 - 35 COLOR 3
36 - 44 COLOR 4
45 - 53 COLOR 5
54 - 62 COLOR 6
63 - 71 COLOR 7
72 - 80 COLOR 8
81 - 89 COLOR 9
90 - 98 COLOR 10
99 - 107 COLOR 11
108 - 116 COLOR 12
117 - 127 COLOR 13
128 - 189 FORWARD RAINBOW EFFECT
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARDS RAINBOW EFFECT
SLOW - FAST
6 GOBOS
0 - 7 OPEN
8 - 15 GOBO 1
16 - 23 GOBO 2
24 - 31 GOBO 3
32 - 39 GOBO 4
40 - 47 GOBO 5
48 - 55 GOBO 6
56 - 63 GOBO 7

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 14
remember that DMX cable must be daisy chained and cannot be split.
Vizi Beam Hybrid 2R Set Up
Notice: Be sure to follow gures two and three when making your own
cables. Do not use the ground lug on the XLR connector. Do not con-
nect the cable’s shield conductor to the ground lug or allow the shield
conductor to come in contact with the XLR’s outer casing. Grounding
the shield could cause a short circuit and erratic behavior.
DMX512 IN
3-PIN XLR
SOUND
REMOTE
CONTROL
INPUT
POWER
INPUT OUTPUT
SOUND
REMOTE
CONTROL
INPUT
POWER
INPUT OUTPUT
SOUND
REMOTE
CONTROL
INPUT
POWER
INPUT OUTPUT
DMX512
DMX+,DMX-,COMMON
1
2
3
Termination reduces signal errors and
avoids signal transmission problems
and interference. It is always advisable
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.
1
2
3
1
2
3
DMX +
DMX -
COMMON
DMX512 OUT
3-PIN XLR
Figure 2
Figure 3
1 Ground 1 Ground
XLR Male Socket XLR Pin Conguration
3 Hot
2 Cold 2 Cold
3 Hot
XLR Female Socket
Pin 3 = Data True (positive)
Pin 2 = Data Compliment (negative)
Pin 1 = Ground
Special Note: Line Termination. When longer runs of cable are
used, you may need to use a terminator on the last unit to avoid erratic
behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-
nected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.
DMX512 IN
3-PIN XLR
SOUND
REMOTE
CONTROL
INPUT
POWER
INPUT OUTPUT
SOUND
REMOTE
CONTROL
INPUT
POWER
INPUT OUTPUT
SOUND
REMOTE
CONTROL
INPUT
POWER
INPUT OUTPUT
DMX512
DMX+,DMX-,COMMON
1
2
3
Termination reduces signal errors and
avoids signal transmission problems
and interference. It is always advisable
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.
1
2
3
1
2
3
DMX +
DMX -
COMMON
DMX512 OUT
3-PIN XLR
Figure 4
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 45
Vizi Beam Hybrid 2R 10 Channel DMX Mode
Channel Value Function
10 LAMP ON/OFF, RESET & PROGRAMS
30 - 39 COLOR & GOBO CHANGE TO ANY
POSITION
40 - 59 LAMP ON
60 - 79 LAMP OFF
80 - 84 ALL MOTOR RESET
85 - 87 SCAN MOTOR RESET
88 - 90 COLOR MOTOR RESET
91 - 93 GOBO MOTOR RESET
94 - 96 SHUTTER/DIMMER MOTOR RESET
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE PROGRAM

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 15
5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-
512 data cables for DATA transmission in place of 3-pin. 5-pin DMX
xtures may be implemented in a 3-pin DMX line. When inserting stan-
dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,
these adaptors are readily available at most electric stores. The chart
below details a proper cable conversion.
Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)
Pin 1
Pin 5 - Do Not Use
Pin 4 - Do Not Use
Pin 3
Pin 2
Pin 1
Pin 3
Pin 2
Not Used
Not Used
Data True (+ signal)
Data Compliment (- signal)
Ground/Shield
3-Pin XLR to 5-Pin XLR Conversion
Vizi Beam Hybrid 2R Set Up
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 44
Vizi Beam Hybrid 2R 10 Channel DMX Mode
Channel Value Function
5 PRISM/GOBO MACROS
208 - 215 MACRO 11
216 - 223 MACRO 12
224 - 231 MACRO 13
232 - 239 MACRO 14
240 - 247 MACRO 15
248 - 255 MACRO 16
6 PRISM ROTATION
0 - 127 PRISM INDEXING
128 - 189 FORWARD PRISM ROTATION
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARD PRISM ROTATION
SLOW - FAST
7 SHUTTER & STROBE
0 - 31 SHUTTER CLOSED
32 - 63 SHUTTER OPEN
64 - 95 STROBING SLOW - FAST
96 - 127 SHUTTER OPEN
128 - 159 PULSE EFFECT IN SEQUENCES
160 - 191 SHUTTER OPEN
192 - 223 RANDOM STROBE SLOW - FAST
224 - 255 SHUTTER OPEN
8 DIMMER
0 - 255 INTENSITY 0% - 100%
9 PAN/TILT MOVEMENT SPEED
0 - 225 MAX TO MIN. SPEED
226 - 235 BLACKOUT BY MOVEMENT
236 - 245 BLACKOUT BY WHEEL CHANGING
246 - 255 NO FUNCTION
10 LAMP ON/OFF, RESET & PROGRAMS
0 - 19 COLOR CHANGE NORMAL
20 - 29 COLOR CHANGE TO ANY POSITION

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 16
Vizi Beam Hybrid 2R System Menu
Function
Set Dmx Address
Dmx Value
Slave Mode
Auto Program
Sound Control
A001~AXXX
PAN……
Slave1,Slave2,Slave3
Master / Alone
Master / Alone
DMX address setting
DMX value display
Slave setting
Auto program
Sound Control
Information
Time Information Current Time
Total Run Time
Last Run Time
Lamp Hours
Lamp Off Time
LastRun Password
Clean Last Run
LampTime Password
Clean Lamp Time
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
XXXX(Minute)
Password=XXX
ON/OFF
Password=XXX
ON/OFF
Power on running time
Fixture running time
Fixture Last times clear
Lamp running time
Lamp off time
Timer Password 038
Clear Fixture Last time
Lamp Password =”038”
Clearlamp time
Temperature Info Head Temperature XXX/Temperature inthe head
Software Version V1.0…… Software version
Lamp Control
Lamp On/Off
Automatic On
Lamp On via DMX
Lamp Off via DMX
Max On at Temp.
Lamp Off Temp.
ON/OFF
ON/OFF
ON/OFF
ON/OFF
20~79 ,45 /68~174 113
80~139,130/176~282 , 266
Lamp on/off
Lamp on/off Power on
Lamp on via DMX
Lamp off via DMX
Lamp restart at temp.
Lamp off at temp.
Personality
Status Settings Address Via DMX
No DMX Status
Pan Reverse
Tilt Reverse
Pan Degree
Feedback
Movement Speed
Mic Sensitivity
Hibernation
ON/OFF
Close/Hold/Auto/Music
ON/OFF
ON/OFF
630/540
ON/OFF
Speed 1~ 4
0~99%
OFF, 01M~99M15M
Add. via DMX
Auto run if no DMX
Pan Reverse movement
Tilt Reverse movement
Pan Degree Select
Movement Feedback
Movement Mode Select
Sensitivity of Mic.
Stand by Mode
Service Setting Password
RDM PID
Password=XXX
XXXXXX
Service Password“=050”
RDM PID Code
Fans Control Auto Fan Speed
Low Fan Speed
High Fan Speed
Fans Speed select
Display Setting Shutoff Time
Display Reverse
Key Lock
02~60m 05m
ON/OFF
ON/OFF
Display shutoff time
Reverse 180 degree
Key Lock
Temperature C/F Celsius
Fahrenheit
Temperature switch
between /
Initial Status PAN =XXX
…….
Initial effect position
Reset Default ON/OFF Restore factory set.
Reset Function
Reset All
Reset Pan&Tilt
Reset Colors
Reset Gobos
Reset Shutter
Reset Others
Reset all motors
Reset Pan/Tilt
Reset color wheel
Reset gobos
Reset shutter or dimmer
Reset other motors
Effect Adjust
Test Channel PAN …… Test function
Manual Control PAN =XXX
:
Fine adjustment of the
lamp
Calibration Calibrate Password
Color wheel=XXX
:
Password “050”
Calbrate and adjust the
effects to standard/right
position
Users Mode Set
User Mode Standard Mode
Basic Mode
Extended Mode
User Mode A
User Mode B
User Mode C
User’s mode to change
channel numbers
Edit User Mode Max Channel = XX
PAN = CH01
:
Preset User modes
Edit Program
Select Programs Auto Pro Part 1 = Program 1 ~ 10 Program 1
Auto Pro Part 2 = Program 1 ~ 10 Program 2
Auto Pro Part 3 = Program 1 ~ 10 Program 3
Select programs to be run
Edit Program Program 1
:
Program 10
Program Test
Step 01=SCxxx
Step 64=SCxxx
Testing program
Program in loop
Save and exit
Edit Scenes Edit Scene 001
~ Edit Scene
250
Pan,Tilt,……
--Fade Time--
--Secne Time--
Input By Exterior
Save and automatically
return
manual scenes edit
Rec. Controller XX~XX Automat. scenes rec
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 43
Vizi Beam Hybrid 2R 10 Channel DMX Mode
Channel Value Function
4 GOBOS CONT.
96 - 103 GOBO 12
104 - 111 GOBO 13
112 - 119 GOBO 14
120 - 126 GOBO 1 SHAKE
127 - 133 GOBO 2 SHAKE
134 - 140 GOBO 3 SHAKE
141 - 147 GOBO 4 SHAKE
148 - 154 GOBO 5 SHAKE
155 - 161 GOBO 6 SHAKE
162 - 168 GOBO 7 SHAKE
169 - 175 GOBO 8 SHAKE
176 - 182 GOBO 9 SHAKE
183 - 189 GOBO 10 SHAKE
190 - 196 GOBO 11 SHAKE
197 - 203 GOBO 12 SHAKE
204 - 210 GOBO 13 SHAKE
211 - 217 GOBO 14 SHAKE
218 - 255 GOBO WHEEL ROTATION
SLOW - FAST
5 PRISM/GOBO MACROS
0 - 31 OPEN
32 - 79 5 FACET PRISM
80 - 127 8 FACET PRISM
128 - 135 MACRO 1
136 - 143 MACRO 2
144 - 151 MACRO 3
152 - 159 MACRO 4
160 - 167 MACRO 5
168 - 175 MACRO 6
176 - 183 MACRO 7
184 - 191 MACRO 8
192 - 199 MACRO 9
200 - 207 MACRO 10

Vizi Beam Hybrid 2R System Menu
The main menu is accessed by pressing the MODE/ESC button.
Browse through the menu by using the UP, DOWN, RIGHT, & LEFT
buttons. Press the ENTER button to access the desired menu. You
can scroll through the submenus using the UP, DOWN, RIGHT, &
LEFT buttons. To conrm every selection press the ENTER button.
You can exit every menu and submenu by pressing the MODE/ESC
button. The unit will automatically exit the menus if no buttons are
pressed after 10 seconds. These next (insert number of pages) pages
will explain each function in the menu layout located on the previous
page.
FUNCTION -
Set DMX Address - With this function, you can adjust the desired
DMX-address via the Control Board.
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is higlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Set DMX Address” is
displayed, and press ENTER. The current DMX address will now be
displayed.
3. Use the UP or DOWN buttons to adjust the DMX address.
4. Press ENTER to conrm or press MODE/ESC to return to the main
menu.
DMX Value - This function will allow you to see the DMX value of
each DMX channel that is currently being used at the time.
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “DMX Value” is displayed,
and press ENTER.
3. A DMX Channel will be displayed. Example: Prism, Color Wheel,
Gobo Wheel, etc... Press ENTER when you nd the DMX channel that
you would like to check. When you press ENTER the DMX value of
that channel will displayed.
4. Press the MODE/ESC button to exit.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 17 ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 42
Vizi Beam Hybrid 2R 10 Channel DMX Mode
Channel Value Function
1 0 - 255 PAN MOVEMENT 8bit
2 0 - 255 TILT MOVEMENT 8bit
3 0 - 8 OPEN
9 - 17 COLOR 1
18 - 26 COLOR 2
27 - 35 COLOR 3
36 - 44 COLOR 4
45 - 53 COLOR 5
54 - 62 COLOR 6
63 - 71 COLOR 7
72 - 80 COLOR 8
81 - 89 COLOR 9
90 - 98 COLOR 10
99 - 107 COLOR 11
108 - 116 COLOR 12
117 - 127 COLOR 13
128 - 189 FORWARD RAINBOW EFFECT
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARDS RAINBOW EFFECT
SLOW - FAST
4 GOBOS
0 - 7 OPEN
8 - 15 GOBO 1
16 - 23 GOBO 2
24 - 31 GOBO 3
32 - 39 GOBO 4
40 - 47 GOBO 5
48 - 55 GOBO 6
56 - 63 GOBO 7
64 - 71 GOBO 8
72 - 79 GOBO 9
80 - 87 GOBO 10
88 - 95 GOBO 11

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 18
Slave Mode - This function lets you designate the unit as the slave in
a Master-Slave conguration.
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Slave Mode” is displayed,
and press ENTER.
3. Either Slave 1, Slave 2, or Slave 3 will be displayed. Press ENTER
to select either of the three, or press MODE/ESC button to exit.
Auto Program - This function allows the internal programs to run in
either stand-alone or master/slave mode. In “Master” mode the x-
ture will send DMX data to other xtures connect via the DMX chain.
In “Alone” mode the xture will operate as a single xture. The pro-
gram for this mode is selected in the “Select program” section of
the control menu. You can set the number of steps under “Edit pro-
gram”. You can edit the individual scenes under “Edit scenes”. With
this function, you can run the individual scenes either automatically,
i.e. with the adjusted Step-Time.
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Auto Program” is displayed,
and press ENTER.
3. Either “Master” or “Alone” will be displayed.
4. Press ENTER to to make your selection, or press MODE/ESC
button to exit.
Sound Control - With this function, the internal program will run in
sound active mode.
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Sound Control” is dis-
played, press ENTER.
3. Either “Master” or “Alone” will be displayed. Use the UP or DOWN
buttons to change the operating mode.
Vizi Beam Hybrid 2R System Menu
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 41
Vizi Beam Hybrid 2R Operation
DOWN buttons select “Alone” and press ENTER.
Master-Slave Operation (Sound Active or Auto Program):
This function will allow you to link up to 16 units together and oper-
ate without a controller. The units can run a built-in program or run in
sound actiive mode.In Master-Slave operation one unit will act as the
controlling unit and the others will react to the controlling units pro-
grams. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The rst unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. On your “Master” unit, access the main menu, and press the UP
or DOWN buttons so that “Function” is highlighted, then
press ENTER.
3. Select your desired operating mode. Use the UP or DOWN but-
tons to select between “Auto Program” or “Sound Control”,
press ENTER to select your desired program.
4. Either “Master” or “Alone” will be displayed. Using the UP or
DOWN buttons select “Master” and press ENTER.
5. For your “Slave” units, access the main menu, and press the UP
or DOWN buttons so that “Function” is highlighted, then
press ENTER.
6. Press the UP or DOWN buttons until “Slave Mode” is displayed,
and press ENTER.
7. Either Slave 1, Slave 2, or Slave 3 will be displayed. Select your
desired Slave setting and press ENTER.
5. Press MODE/ESC if you want to return to the main menu.
6. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on pages 26-27.

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 19
Vizi Beam Hybrid 2R System Menu
4. Press ENTER to to make your selection, or press MODE/ESC
button to exit.
INFORMATION
Time Information (Time information is always represented in
hours)
Current Running Time - This will allow you to check units current
running time.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Current Time” is displayed,
and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the current run-
ning time.
5. Press ENTER or press MODE/ESC to exit.
Total Running Time - This will allow you to check units total running
time.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Total Run Time” is displayed,
and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the total run-
ning time.
5. Press ENTER or press MODE/ESC to exit.
Last Run Time - This will allow you to check the last running time of
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 40
Universal DMX Control: This function allows you to use a uni-
versal DMX-512 controller such as the Elation®DMX Operator™
or Elation®Show Designer™ to control head movement, the color
wheel, gobo wheel, prism, master dimmer, shutter (strobe), and vari-
ous other features. A DMX controller allows you to create unique pro-
grams tailored to your individual needs.
1. The Vizi Beam Hybrid 2R has a 10 Channel mode, 12 Channel
mode, and 16 Channel mode. See pages 42-53 for detailed
description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 13-15 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the directions on page 36 to select your DMX Channel
mode, and follow the instruction on page 17 to set the DMX
address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone (Sound Active or Auto Program): This mode allows
a single unit to run to the beat of the music or run through a built-in
program.
AUTO PROGRAM:
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Auto Program” is dis-
played, and press ENTER.
3. Either “Master” or “Alone” will be displayed. Using the UP or
DOWN buttons select “Alone” and press ENTER.
SOUND ACTIVE:
1. Access the main menu, and press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Sound Control” is dis-
played, press ENTER.
3. Either “Master” or “Alone” will be displayed. Using the UP or
Vizi Beam Hybrid 2R Operation