ADLINK Technology DLAP-301 Series User manual

DLAP-301 Series
DLAP-301-JNX / DLAP-301-Nano
Edge Inference System
User’s Manual
Manual Rev.: 1.0
Revision Date: Sept. 23, 2021
Part No: 50M-00044-1000

ii Revision History
Revision History
Revision Release Date Description of Change(s)
1.0 2021-09-23 Initial Release

Preface iii
DLAP-301 Series
Preface
Copyright © 2021 ADLINK Technology, Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
Informations destinées à prévenir les blessures corporelles
mineures, les dommages aux composants, la perte de don-
nées et/ou la corruption de programme lors de l'exécution
d'une tâche.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
Informations destinées à prévenir les blessures corporelles
graves, les dommages aux composants, la perte de données
et/ou la corruption de programme lors de l'exécution d'une
tâche spécifique.

Table of Contents v
DLAP-301 Series
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Tables......................................................................... vii
List of Figures........................................................................ ix
1 Introduction ........................................................................ 1
1.1 Features............................................................................... 1
1.2 Specifications....................................................................... 2
1.3 Functional Block Diagram.................................................... 4
1.4 Mechanical Dimensions....................................................... 5
1.5 External Layout.................................................................... 6
1.6 Pin Definitions...................................................................... 8
1.6.1 Ethernet GbE Connectors ..........................................8
1.6.2 Power over Ethernet (PoE).......................................10
1.6.3 USB 3.0 Connectors.................................................11
1.6.4 GPIO Connector.......................................................12
1.6.5 12 Volt DC Connector...............................................13
1.6.6 Power Button............................................................13
1.6.7 Extended Power Remote Connector........................14
1.6.8 COM Port (Serial Port) .............................................15
1.6.9 HDMI Connectors.....................................................16
1.6.10 USB 2.0 OTG Connector..........................................16
2 Getting Started ................................................................. 17
2.1 Unpacking Checklist .......................................................... 17
2.2 Cooling Considerations...................................................... 17
2.3 Removing the Chassis Cover............................................ 18
2.4 Installing a Mini PCIe Wi-Fi or LTE Module....................... 19

vi Table of Contents
2.5 Connecting DC Power ....................................................... 21
2.6 Power Mode Switch........................................................... 22
3 Using the System.............................................................. 23
3.1 Software Configuration ...................................................... 23
3.2 System Recovery............................................................... 24
3.3 DIO Configuration.............................................................. 25
Important Safety Instructions............................................... 27
Getting Service...................................................................... 29

List of Tables vii
DLAP-301 Series
List of Tables
Table 1-1: Specifications .............................................................2
Table 1-2: Front Panel I/O Connectors & Controls......................6
Table 1-3: Rear Panel I/O Connectors ........................................7
Table 1-4: RJ-45 GbE Pin Definition............................................9
Table 1-5: RJ45 PoE Connector Pin Definition..........................11
Table 1-6: USB 3.0 Pin Definition..............................................11
Table 1-7: GPIO Pin Definition ..................................................12
Table 1-8: 12 Volt DC Connector Pin Definition ........................13
Table 1-9: Remote Power Connector Pin Definition..................14
Table 1-10: RS-232/485 Connector Pin Definition.......................15
Table 1-11: HDMI Connector Pin Definition.................................16
Table 1-12: USB 2.0 OTG Connector Pin Information.................16
Table 2-1: Power Mode Switch Jumper Settings.......................22

viii List of Tables
This page intentionally left blank.

List of Figures ix
DLAP-301 Series
List of Figures
Figure 1-1: Functional Block Diagram...........................................4
Figure 1-2: Front View Dimensions...............................................5
Figure 1-3: Side View Dimensions................................................5
Figure 1-4: Front Panel I/O Connectors & Controls......................6
Figure 1-5: Rear Panel I/O Connectors ........................................7
Figure 2-1: Power Mode Switch Jumpers...................................22
Figure 3-1: Successful Client/Host Connection ..........................24

xListofFigures
This page intentionally left blank.