ADLINK Technology cPCI-3630 Series User manual

Leading EDGE COMPUTING
Manual Rev.: 1.0
Revision Date: June 16, 2020
Part No.: 50-15112-2000
cPCI-3630 Series
Low-Power 3U CompactPCI®
Quad-Core Intel Atom®Processor Blade
User’s Manual

ii Revision History
Leading EDGE COMPUTING
Revision History
Revision Release Date Description of Change(s)
1.0 16-06-2020 Initial release

Preface iii
cPCI-3630
Preface
Copyright © 2020 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental
protection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.
Battery Labels
ᑜ㔚ᳰ⺧࿁ᡴ

iv Preface
Leading EDGE COMPUTING
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Diox-
ane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
cancer, and acrylamide, benzene, cadmium, lead, mercury,
phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
cPCI-3630
Table of Contents
Revision History...................................................................... ii
Preface .................................................................................... iii
List of Figures ........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 Model Number Decoder....................................................... 3
1.4 Package Contents ............................................................... 5
2 Specifications..................................................................... 7
2.1 cPCI-3630 Processor Blade Specifications ......................... 7
2.2 cPCI-R3610(T) RTM Specifications................................... 10
2.3 Block Diagrams.................................................................. 11
2.4 I/O Connectivity Table ....................................................... 14
2.5 Power Requirements ......................................................... 15
3 Functional Description .................................................... 17
3.1 Processors......................................................................... 17
3.2 XMC................................................................................... 20
3.3 Intel® Virtualization Technology ........................................ 20
3.4 Intel® AES New Instructions.............................................. 20
3.5 Battery ............................................................................... 20
4 Board Interfaces............................................................... 21
4.1 cPCI-3630 Series Board Layout ........................................ 21
4.2 cPCI-3630 Blade Assembly Layout ................................... 22

vi Table of Contents
Leading EDGE COMPUTING
4.3 cPCI-3630D Blade Assembly Layout................................. 23
4.4 cPCI-3630G Blade Assembly Layout................................. 24
4.5 cPCI-3630M Blade Assembly Layout ................................ 25
4.6 cPCI-3630N Blade Assembly Layout................................. 26
4.7 cPCI-3630S Blade Assembly Layout ................................. 26
4.8 cPCI-3630T Blade Assembly Layout ................................. 27
4.9 cPCI-3630TR Blade Assembly Layout............................... 28
4.10 cPCI-3630 Series Faceplate .............................................. 29
4.11 cPCI-R3610(T) RTM Board Layout.................................... 33
4.12 cPCI-R3610(T) RTM Faceplate ......................................... 34
4.13 cPCI-3630 Blade Connector Pin Assignments .................. 35
4.14 cPCI-R3610(T) RTM Connector Pin Assignments............. 46
4.15 Switch and Jumper Settings .............................................. 48
5 Getting Started .................................................................. 53
5.1 CPU and Heatsink ............................................................. 53
5.2 SATA Drive Installation ...................................................... 54
5.3 XMC Card Installation ........................................................ 56
5.4 Installing the cPCI-3630 to the Chassis ............................. 57
5.5 RTM Installation - cPCI-R3610(T)...................................... 58
6 Driver Installation.............................................................. 59
6.1 cPCI-3630 Drivers.............................................................. 59
7 Utilities ............................................................................... 61
7.1 SEMA................................................................................. 61
7.2 Preboot Execution Environment (PXE).............................. 61
7.3 Watchdog Timer................................................................. 62
8 BIOS Setup Utility ............................................................. 63
8.1 Starting the BIOS ............................................................... 63
8.2 Main Setup......................................................................... 65
8.2.1 BIOS Information .......................................................... 66
8.2.2 System Information........................................................ 66

Table of Contents vii
cPCI-3630
8.2.3 Board Information .......................................................... 66
8.2.4 System Date and Time .................................................. 67
8.3 Advanced........................................................................... 68
8.3.1 CPU Configuration......................................................... 68
8.3.2 Power Management ...................................................... 71
8.3.3 System Management..................................................... 71
8.3.4 Thermal Management.................................................... 73
8.3.5 Watchdog Timer ............................................................ 73
8.3.6 CSM Configuration ........................................................ 74
8.3.7 Serial Console Redirection ............................................ 75
8.3.8 USB ............................................................................... 78
8.3.9 Network.......................................................................... 79
8.3.10Miscellaneous................................................................ 79
8.3.11Trusted Computing ........................................................ 79
8.3.12NCT6106D Super IO Configuration ............................... 80
8.4 Chipset............................................................................... 81
8.4.1 North Bridge................................................................... 81
8.4.2 South Bridge .................................................................. 81
8.4.3 Uncore Configuration..................................................... 82
8.4.4 South Cluster Configuration........................................... 82
8.5 Security.............................................................................. 86
8.5.1 Password Description.................................................... 86
8.6 Boot ................................................................................... 87
8.7 Boot ................................................................................... 88
8.7.1 Reset Options................................................................ 88
8.7.2 Save Options ................................................................. 88
Important Safety Instructions .............................................. 89
Getting Service...................................................................... 91

viii Table of Contents
Leading EDGE COMPUTING
This page intentionally left blank.

List of Figures ix
cPCI-3630
List of Figures
Figure 2-1: cPCI-3630 Blade Functional Block Diagram.................. 11
Figure 2-2: cPCI-3630D Daughter Board Functional Block Diagram12
Figure 2-3: cPCI-3630T Daughter Board Functional Block Diagram12
Figure 2-4: cPCI-R3610 RTM Functional Block Diagram ................ 13
Figure 4-1: cPCI-3630 Series Board Layout .................................... 21
Figure 4-2: cPCI-3630 Blade Assembly Layout ............................... 22
Figure 4-3: cPCI-3630D Blade Assembly Layout............................. 23
Figure 4-4: cPCI-3630G Blade Assembly Layout ............................ 24
Figure 4-5: cPCI-3630M Blade Assembly Layout ............................ 25
Figure 4-6: cPCI-3630S Blade Assembly Layout............................. 26
Figure 4-7: cPCI-3630T Blade Assembly Layout ............................. 27
Figure 4-8: cPCI-3630TR Blade Assembly Layout .......................... 28
Figure 4-9: cPCI-3630, cPCI-3630D/G Faceplate Layout................ 29
Figure 4-10: cPCI-3630M/N/S Faceplate Layout ............................... 30
Figure 4-11: cPCI-3630T(R) Faceplate Layout .................................. 31
Figure 4-12: cPCI-R3610(T) RTM Board Layout ............................... 33
Figure 4-13: cPCI-R3610(T) RTM Faceplate ..................................... 34

xListofFigures
Leading EDGE COMPUTING
This page intentionally left blank.