ADLINK Technology NuPRO-E72 User manual

Advance Technologies; Automate the World.
Manual Rev.: 2.05
Revision Date: Apr. 24, 2015
Part No: 50-13074-1010
NuPRO-E72
PICMG®1.3 Full Size LGA1150 Intel®Xeon®E3-
1200v3 Processor-Based SHB
User’s Manual

ii
Revision History
Revision Release Date Description of Change(s)
2.00 2014/9/30 Initial release
2.05 2015/4/24 Procedural errata rectified

Preface iii
NuPRO-E72
Preface
Copyright 2015 ADLINK Technology, Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
NuPRO-E72
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Specifications....................................................................... 2
1.4 Block Diagram ..................................................................... 4
1.5 Functional Description ......................................................... 4
1.6 Mechanical Drawing ............................................................ 7
1.7 I/O Connectivity ................................................................... 8
1.8 Power Consumption ............................................................ 9
1.8.1 Intel® Xeon® Processor E3-1225 v3 3.2GHz
(84W)..........................................................................9
1.8.2 Intel® Xeon® Processor E3-1268L v3 2.30 GHz
(45W)........................................................................10
1.8.3 Intel® Core™ i3-4330 Processor 3.5GHz (54W)......11
1.8.4 Intel® Celeron® G1820 Processor 2.7GHz (53W)...12
1.9 Rear I/O Panel................................................................... 13
1.10 Board Layout ..................................................................... 16
1.11 Onboard Connectors ......................................................... 17
2 Getting Started ................................................................. 23
2.1 Package Contents ............................................................. 23
2.2 Installing the CPU.............................................................. 23
2.3 Installing the CPU Fan and Heatsink................................. 27

vi Table of Contents
2.4 Installing Memory Modules................................................ 27
2.5 Jumpers & Switches .......................................................... 29
2.6 Driver Installation............................................................... 31
2.6.1 Installing Chipset Driver............................................32
2.6.2 Installing Graphics Driver.........................................32
2.6.3 Installing Ethernet Driver ..........................................32
2.6.4 Installing Management Engine Driver.......................32
2.6.5 Installing USB 3.0 Driver...........................................32
A Appendix: BIOS Setup.......................................................35
A.1 Starting the BIOS............................................................... 35
A.2 Main Setup......................................................................... 39
A.3 Advanced BIOS Setup....................................................... 40
A.3.1 ACPI Settings ...........................................................41
A.3.2 Trusted Computing...................................................43
A.3.3 CPU Configuration....................................................44
A.3.4 SATA Configuration..................................................46
A.3.5 Intel TXT Configuration.............................................47
A.3.6 Intel IGD SWSCI OpRegion......................................48
A.3.7 USB Configuration....................................................49
A.3.8 Super IO Configuration.............................................51
A.3.9 Hardware Monitor.....................................................52
A.3.10 AMT Configuration....................................................53
A.3.11 Serial Port Console Redirection................................55
A.4 Chipset Setup .................................................................... 58
A.4.1 Graphics and Memory Bridge Configuration.............59
A.4.2 PCH Bridge Configuration ........................................60
A.4.3 Management Engine Subsystem..............................62
A.5 Boot Configuration............................................................. 64
A.6 Security Setup.................................................................... 66
A.7 Exit Menu........................................................................... 68

Table of Contents vii
NuPRO-E72
B Appendix: Watchdog Timer..............................................71
B.1 Sample Code..................................................................... 71
C Appendix: System Resources..........................................75
C.1 System Memory Map......................................................... 75
C.2 Direct Memory Access Channels....................................... 75
C.3 IO Map............................................................................... 76
C.4 Interrupt Request (IRQ) Lines............................................ 77
Important Safety Instructions.............................................. 83
Getting Service...................................................................... 85

viii Table of Contents
This page intentionally left blank.

List of Figures ix
NuPRO-E72
List of Figures
Figure 1-1: NuPRO-E72 Block Diagram ............................................4
Figure 1-2: NuPRO-E72 Board..........................................................7
Figure 1-3: Rear I/O Panel..............................................................13
Figure 1-4: NuPRO -E72 Board Topography...................................16

xListofFigures
This page intentionally left blank.

List of Tables xi
NuPRO-E72
List of Tables
Table 1-1: NuPRO-E72 I/O Connectivity ..........................................8
Table C-1: System Memory Map.....................................................75
Table C-2: Direct Memory Access Channels...................................75
Table C-3: IO Map...........................................................................76
Table C-4: IRQ Lines PIC Mode......................................................77
Table C-5: IRQ Lines APIC Mode ...................................................79
Table C-6: PCI Configuration Space Map.......................................81
Table C-7: PCI Interrupt Routing Map.............................................82

xii List of Tables
This page intentionally left blank.

Introduction 1
NuPRO-E72
1 Introduction
1.1 Overview
The ADLINK NuPRO-E72 is a PICMG 1.3 System Host Board
(SHB) supporting 4th Generation Intel Xeon E3-1200 v3, Core i3,
Pentium and Celeron processors in a LGA1150 package to deliver
a scalable high performance platform for a wide array of industrial
applications. The NuPRO-E72 supports 22nm process CPUs at up
to 3.5 GHz with integrated graphics and memory controllers,
Direct Media Interface (DMI) and Flexible Display Interface (FDI)
connectivity to the Intel® C226 Express Chipset. Dual-channel
DDR3 ECC memory is supported up to a maximum of 16 GB in
two DIMM slots.
These advanced features, coupled with PCI Express® x16 expan-
sion capability, dual PCI Express®-based Gigabit Ethernet, SATA
6 Gb/s and USB 3.0 support make the NuPRO-E72 ideal for vision
and automation control applications.
1.2 Features
XSupports 4th Generation Intel®Xeon®E3-1200 v3, Core i3,
Pentium and Celeron processors
XIntegrated Intel®HD Graphics
XPCI Express x16 expansion, configurable as two PCI
Express x8 or one PCI Express x8 and two PCI Express x4
XDual Gigabit Ethernet
X6x USB 3.0 ports (2x on rear panel, 4x on SHB)
X4x USB 2.0 ports on backplane
X4x SATA 6 Gb/s ports on SHB
X6x COM ports (including 1x RS-232/422/485)
XWatchdog Timer, Hardware Monitor
XOptional HD audio kit (DB-Audio2 daughter board)
XTPM hardware security chip
XRoHS compliant

2Introduction
1.3 Specifications
NOTE:
NOTE:
To purchase the optional DB-Audio2 daughter board, please
contact your ADLINK sales representative.
System
CPU
•Intel
®
Xeon
®
E3-1275v3, 3.5GHz, 8M Cache, 22nm, 84W
TDP, LGA1150 (4C)
•Intel
®
Xeon
®
E3-1225v3, 3.2GHz, 8M Cache, 22nm, 84W
TDP, LGA1150 (4C)
•Intel
®
Xeon
®
E3-1268Lv3, 2.3GHz, 8M Cache, 22nm,
45W TDP, LGA1150 (4C)
•Intel
®
Core™ i3-4330S, 3.5 GHz, 3M Cache, 22nm, 54W
TDP, LGA1150 (2C)
•Intel
®
Pentium® G3420, 3.2 GHz, 3M Cache, 22nm, 54W
TDP, LGA1150 (2C)
•Intel
®
Celeron G1820, 2.7GHz, 2M Cache, 22nm, 55W
TDP, LGA1150 (2C)
Chipset Intel
®
C226 Platform Controller Hub
Memory • 2x 240-pin DIMM sockets • Dual-channel DDR3 ECC/non-ECC 1333/1600 MHz (up
to 16 GB)
BIOS AMIBIOS in 64-Mbit SPI Flash
Audio Intel® High Definition Audio support via DB-Audio2
daughter board
Watch Dog
Timer 1-255 second or 1-255 minute programmable and can generate system reset.
Hardware
Monitor CPU/System temperature, fan speed and onboard DC voltage
TPM Infineon SLB 9635 TT 1.2
Operating
Systems
• Microsoft® Windows® 7 SP1 64-bit
• Microsoft® Windows® 8.1 64-bit
• Microsoft® Windows® Server 2008 R2
• Fedora 19 64-bit
• RedHat Enterprise Linux 6.5 64-bit
• Ubuntu 13.10 64-bit

Introduction 3
NuPRO-E72
I/O Interfaces
I/O Ports
• 6x USB 3.0 ports (2x on rear panel, 4x on SHB)
• 4x USB 2.0 on backplane
• 4x SATA 6 Gb/s on SHB
• 6x serial ports via onboard pin-header
(5x RS-232, 1x RS-232/422/485 with auto flow control)
• 2x Gigabit Ethernet RJ45 ports
• 1x VGA port (Dsub-15)
• 1x DVI-D via onboard pin-header (opt. cable bracket)
• Pin header for HD Audio DB-Audio2 daughter board
• 1x PS/2 KB/MS via onboard pin header (opt. cable
bracket)
PCIe/PCI
• PCIe-x16 (or two PCIe x8 or one PCIe x8 and two PCIe
x4)Gen3
• PCIe-x4 (or four PCIe x1) and PCI 32bit/33MHz (TI
XIO2001) via golden fingers
Graphics
Integrated Integrated Intel® HD Graphics
External PCI Express x16
Ethernet
Controller
• Dual Gigabit Ethernet (Intel® I217LM Gigabit Ethernet
PHY, Intel® I211-AT Gigabit Ethernet Controller)
• Supports Preboot Execution Environment (PXE), Wake-
On-LAN, and Intel® AMT 9.0 on LAN1 (I217LM)
Ports Two RJ-45 Ethernet ports
Mechanical and Environment
Form Factor Standard full-size PICMG 1.3 SHB
Dimensions 338 x 126 mm (L x W)
Operating
Temp. 0ºC to 60ºC
Storage Temp. -20ºC to 80ºC
Rel. Humidity 10% to 90% non-condensing
Safety CE, FCC Class A

4Introduction
1.4 Block Diagram
Figure 1-1: NuPRO-E72 Block Diagram
1.5 Functional Description
Processor Support
The NuPRO-E72 is PICMG 1.3 System Host Board supporting the
4th Generation Intel®Xeon®and Core™ processor family in
LGA1150 socket. An integrated memory controller supports dual
channel DDR3 ECC and Intel®HD Graphics is integrated onboard
the CPU. The CPU provides a PCI Express x16 for external graph-
ics or expansion. Direct Media Interface (DMI) and Flexible Dis-
play Interface (FDI) provide connectivity to the Intel®C226
Express Chipset.
Intel®C226 Express Chipset
The Intel®DH82C26 Platform Controller Hub (PCH) combines
with the processor to provide a compact yet powerful 2-chip solu-
tion. Direct Media Interface (DMI) is the chip-to-chip connection
Dual Channel
DDR3 ECC 1600
Max. 16GB
DVI-D
4 USB 2.0 Ports
x4 DMI
x2 Display
Link
Analog VGA
BIOS
LPC
TPM 1.2
SPI
Dual/Quad
Dual/Quad
core 22nm
core 22nm
Haswell
Haswell
Memory
Controller
Graphics
Controller
Intel
MAC
I217LM Dual
GbE
Intel
MAC+PHY
I211-AT
1 PCIe x4 or 4 PCIe x1
PCIe x16 Gen 3
(discrete graphics or I/O)
4 PCI
Audio
6 COM
Pin header
for KB/MS
ITE
Super I/O
IT8786
PCH
PCH 6 USB 3.0
PCIe to PCI
4 SATA 6 Gb/s
C226

Introduction 5
NuPRO-E72
between the processor and PCH. Intel® Flexible Display Interface
carries display traffic from the integrated graphics in the processor
to the legacy display connectors in the PCH. The PCH supports all
other required interfaces including PCI Express, SATA 6 Gb/s,
USB 3.0, PCI, LPC, and SPI.
Dual-Channel DDR3 ECC Memory
To meet the requirements of memory-intensive applications, the
NuPRO-E72 has a dual-channel memory architecture supporting
DDR3 ECC 1333/1600 MHz DIMMs. The key advantages of
DDR3 ECC are the higher bandwidth and the increase in perfor-
mance at lower power than DDR2. DDR3 ECC memory technol-
ogy meets the requirements of the latest 3D graphics, multimedia,
and network application, and boosts system performance by elimi-
nating bottlenecks.
Gigabit Ethernet
The NuPRO-E72 utilizes an Intel® I217LM Gigabit Ethernet PHY
and Intel® I211-AT Gigabit Ethernet Controller connected to the
PCI-E bus of the C226 PCH. Intel® AMT 9.0 (I217LM on LAN1),
Wake-on-LAN and PXE are supported.
Serial ATA
The NuPRO-E72 provides four Serial ATA ports with data transfer
rates of up to 6.0 GB/s. Intel® Rapid Storage Technology supports
AHCI and RAID 0/1/5/10 functionality.
Universal Serial Bus (USB 2.0/3.0)
The NuPRO-E72 provides 4 USB 2.0 ports (backplane) supporting
transfer rates up to 480 Mb/s and 6 USB 3.0 ports (2x on rear
panel, 4x on SHB) supporting transfer rates up to 5 Gb/s. All ports
are USB 2.0/1.1 compatible.
Hardware monitoring
A built-in, proactive hardware monitoring system in the Super I/O
monitors the CPU temperature, system fan speed, and voltage
levels to prevent overheating and/or component damage, effect

6Introduction
timely failure detection, and ensure stable supply of current for
critical components.
Watchdog Timer
The watchdog timer (WDT) monitors system operations based on
user-defined configurations. The WDT can be programmed for dif-
ferent time-out periods, such as from 1 to 255 seconds or from 1 to
255 minutes. The WDT generates a reset signal, then a reset
request, after failure to strobe it within the programmed time
period. A register bit may be enabled to indicate if the watchdog
timer caused the reset event. The WDT register is cleared during
the power-on sequence to enable the operating system to take
appropriate action when the watchdog generates a reboot.
Trusted Platform Module
The NuPRO-E72 optionally supports TPM ver. 1.2 (Trusted Plat-
form Module) for secure storage of keys, passwords and digital
certificates. Systems supporting TPM offer improved hardware-
based security in numerous applications, such as file and folder
encryption, local password management, S-MIME e-mail, VPN
and PKI authentication and wireless authentication for 802.1x and
LEAP.
Intel® Active Management Technology
Intel® Active Management Technology (Intel® AMT) is hardware-
based technology for remotely managing and securing PCs out-of-
band. Intel® AMT includes hardware-based remote management,
security, power-management, and remote-configuration features.
Intel® AMT allows remote access to a system when traditional
techniques and methods are not available.

Introduction 7
NuPRO-E72
1.6 Mechanical Drawing
Figure 1-2: NuPRO-E72 Board
Dimensions
in mm
126.39
4.92
20.59
123.09
338.1
333.6
146
38.5
6.5
6
111
117

8Introduction
1.7 I/O Connectivity
Table 1-1: NuPRO-E72 I/O Connectivity
I/O Bracket Onboard Golden
Finger Remarks
VGA Y — — DB-15
DVI-D — Y —
cable w/ bracket
optional
LAN1/2 (RJ-45) Y — — Act/Link/
Speed LEDs
PS/2 KB/MS — Y — cable w/ bracket
optional
USB Rear Panel 2 — — USB 3.0
USB 3.0 headers — 4 — cable w/ bracket
optional
USB backplane — — 4 USB 2.0
COM1-2 — Y — 2.54” pitch
COM3-6 — Y — 2.00" pitch
SATA — 4 — —
PCIe x4 — — Y or four PCIe x1
PCIe x16 — — Y
PCI Express x16
expansion can
be configured as
two PCI Express
x8 or one PCI
Express x8 and
two PCI Express
x4
PCI 32bit/33MHz — — Y via TI XIO2001