ADLINK Technology EPS-4008 User manual

EPS-4008 Quick Start Guide Rev. 2.00
EPS-4008
Remote 8-CH ±10V Analog Output Module for EtherCAT
Getting Started
Features
• 8CH 100kS/s ±10V
single-ended analog output
• IEC 61131 compliant
• Compact 100 (L) x 100 (H)
mm size
• Loopback circuitry for output
monitoring
• Operable in -20°C to 60°C
environments
• Hot swappable under
sustained power
• Module temperature
self-diagnostics
P/N 50-40294-5000 May 8, 2015
Specifications
Slide the EPS-4008 module into
any vacant slot (from Slots 1 to 4) along
the guide groove until firmly seated
Ensure the EPS-9905 and EPS-6000
are configured and operational
Tighten the thumbscrew and
complete signals wiring
Power up the EPS system
Configure and generate the ESI file
with LinkMasterPro™
Channels
8 Single-ended
Output Range ±10V
Resolution 16 bit
Sampling Rate 100KHz
Offset Error ±0.2mV
GainError ±0.05% of FSR
Offset Drift ±0.0075mV /°C
GainDrift ±0.00025% /°Cof FSR
Output Current Capacity5mA
Power On State Relayoff
Voltage Protection ±24V/Relayoff
Whenerror voltage occurs
Power Consumption
from Chassis< 450mW (max.)
ThermalDissipation
(at maxtemp.)
< 2.55W (max.)
@ EVCC=24V+10%
Operating Temperature -20 - 60°C
Isolation (Channel-to-
DGND)2kV(DC)
Isolation (Channel-to-
Chassis) 2kV(DC)

EPS-4008 Quick Start Guide Rev. 2.00
P/N 50-40294-5000 May 8, 2015
Advance Technologies
Automate the World
Web: http://www.adlinktech.com
Service: [email protected]
Tel: [phone]
Fax: [phone]
Copyright 2015 ADLINK Technology, Inc.
Contents and specifications subject to change
without notice.
Contact ADLINK
Connector
Signal Connection
Configuration & ESI Generation
LinkMasterPro™ is a
Windows-based utility from
ADLINK, helping configuration
of the entire EPS system and
generating corresponding
EtherCAT slave information
(referred to ESI) in XML format.
LinkMasterPro™ automatically
detects installed EPS modules
and evaluates functionality of
the EPS system.
Connector: Phoenix Contact, DFMC series, 1787195,
pitch=3.5mm, 1x20pin, AWG 16-24 gauge
Pin Definitions
LED Indicators
Name
Status
Function
STS Blinking Temperature Protection
Module Present
PWR Lit Module Power Status
Pin
Description
Pin
Description
01NC 11 NC
02 AO0112 AGND
03AO02 13 AGND
04 AO0314 AGND
05AO04 15 AGND
06AO0516 AGND
07 AO0617 AGND
08 AO07 18 AGND
09AO08 19 AGND
10 NC 20 NC
DAC
16-bit AMP AO[0:7]
AGND