Advantech MIO-5375 User manual

To learn more about EMAC’s products and services and how they can help your project
http://ftp.emacinc.com/Tech_Info/About_EMAC_Products_and_Services.pdf
Authorized Distributor, Integrator, and Value-Added Reseller
Manual downloaded from ftp.emacinc.com
For purchase information please contact [e-mail]
For technical support please submit a ticket at www.emacinc.com/support

User Manual
MIO-5375
11th Gen. Intel® Core™ i7/i5/i3/
Celeron U-Series 3.5" SBC w/ MIOe

MIO-5375 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2021
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgments
Intel® is a trademark of Intel® Corporation.
AMI is a trademark of American Megatrends, Inc.
IBM, PC, PS/2 and VGA are trademarks of International Business Machines Corpo-
ration.
Microsoft Windows®, DirectX® is a registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
For more information on this and other Advantech products, please visit our websites
at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our support website at:
http://support.advantech.com/
This manual is for the MIO-5375.
Part No. 2006537500 Edition 1
June 2021

iii MIO-5375 User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

MIO-5375 User Manual iv
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
flatterer. Discard used batteries according to the manufacturer's instruc-
tions.

v MIO-5375 User Manual
Packing List
Before you begin installing your card, please make sure that the following materials
have been shipped:
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately.
Optional MIOe Module
Part Number Description
MIOe-260L-00A1 Dual Intel GbE with M.2 B-key & F/S miniPCIe
MIOE-210-D6A1E 4 x RS232/422/485, 2 x RS422/485, 8-bit GPIO
MIOe-220-B3A1E 3 x Intel® Gigabit Ethernet with PCIe Switch
MIOe-230-L0A1E 48-bit LVDS or DisplayPort, 2 x USB 2.0
Optional Accessories
Part number Description
1970004833N001 Heat spreader of MIO-5375
1 x MIO-5375 SBC
1 x SATA Cable 30cm (p/n: 1700006291)
1 x SATA Power Cable 35cm (p/n: 1700031583-01)
1 x USB 2.0 Cable 20cm (p/n: 1700030406-01)
1 x Audio Cable 20cm (p/n: 1700019584-01)
2 x COM RS-232/422/485 Cable 20cm (p/n: 1700030404-01)
2 x COM RS-232 Cable 20cm (p/n: 1700031582-01)
1 x Cooler (Heatsink) (p/n: 1970004884T001,
(1970004794T001))
1 x Startup manual (p/n: 2046537500)
1 x Mini Jumper(10pcs package)
1 x Screw Kit (2sets screws and post for M.2 device & 4sets of screws and stand-off)
1 x DeviceOn Package

MIO-5375 User Manual vi

vii MIO-5375 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications ............................................................................................ 2
1.3 Block Diagram........................................................................................... 4
Chapter 2 Mechanical ...........................................5
2.1 Introduction ............................................................................................... 6
2.2 Board Layout: Dimensions ........................................................................ 6
Figure 2.1 MIO-5375 Mechanical Drawing (Top Side) ................ 6
Figure 2.2 MIO-5375 Mechanical Drawing (Bottom Side) ........... 7
Figure 2.3 MIO-5375 Mechanical Drawing (Coastline)................ 7
Figure 2.4 MIO-5375 Mechanical Drawing (with Cooler)............. 8
Figure 2.5 MIO-5375 Mechanical Drawing (with Heatsink) ......... 8
Figure 2.6 MIO-5375 Mechanical Drawing (with Heat Spreader) 9
2.3 Quick Installation Guide ............................................................................ 9
2.3.1 Cooler ........................................................................................... 9
2.3.2 Heatsink ...................................................................................... 10
2.3.3 Heatspreader (Option) ................................................................ 10
Chapter 3 Installation..........................................11
3.1 Jumpers & Switches................................................................................ 12
Table 3.1: Jumpers & Switches ................................................. 12
3.2 Connectors.............................................................................................. 12
Table 3.2: Connectors ............................................................... 12
3.3 Locating connectors ................................................................................ 13
Figure 3.1 MIO-5375 Connector Locations (Top Side).............. 13
Figure 3.2 MIO-5375 Connector Locations (Bottom Side)......... 13
3.4 Setting Jumpers ...................................................................................... 14
3.4.1 Auto Power On / Load BIOS default (J3) .................................... 14
3.4.2 LCD Power (VDD1)..................................................................... 15
3.4.3 CN11 12V Power Input ............................................................... 15
3.4.4 DIMM1 SODIMMDDR4_260 9.2mm........................................... 15
3.4.5 DIMM2 SODIMMDDR4_260 5.2mm........................................... 15
3.4.6 Battery1 RTC Battery.................................................................. 16
3.4.7 CN4 CAN BUS............................................................................ 16
3.4.8 CN5 Front Panel ......................................................................... 16
3.4.9 AUDIO1 Audio ............................................................................ 17
3.4.10 CN8 I2C ...................................................................................... 17
3.4.11 COM1.......................................................................................... 18
3.4.12 COM2.......................................................................................... 18
3.4.13 COM3.......................................................................................... 19
3.4.14 COM4.......................................................................................... 19
3.4.15 CN7 GPIO................................................................................... 20
3.4.16 LAN1 RJ45_2x1_W/XFMR&LED................................................ 20
3.4.17 BL1 Inverter Power Output ......................................................... 21
3.4.18 LVDS1 48-bit LVDS Panel.......................................................... 21
3.4.19 EDP1 eDP (option) ..................................................................... 23
3.4.20 HDMI........................................................................................... 25
3.4.21 M2_1 M.2 E key.......................................................................... 25
3.4.22 M2_2 M.2 M key ......................................................................... 26
3.4.23 M2_3 M.2 B key.......................................................................... 28

MIO-5375 User Manual viii
3.4.24 SIM NANO SIM........................................................................... 30
3.4.25 USB1 USB3.0_13H .................................................................... 30
3.4.26 USB2 USB3.0_13H .................................................................... 31
3.4.27 USB3 Internal USB..................................................................... 31
3.4.28 SATAP1 SATA Power ................................................................ 32
3.4.29 SATA1 SATA_7V........................................................................ 32
3.4.30 CN10 SMART FAN..................................................................... 32
3.4.31 MIOE MIOe................................................................................. 33
Chapter 4 AMI BIOS Setup................................. 37
4.1 Entering Setup ........................................................................................ 39
4.1.1 Main Setup.................................................................................. 39
4.1.2 Advanced BIOS Features Setup................................................. 40
4.1.3 Chipset Configuration ................................................................. 62
4.1.4 Security....................................................................................... 73
4.1.5 Boot ............................................................................................ 74
4.1.6 Save & Exit ................................................................................. 75
Appendix A System Assignments........................ 77
A.1 System I/O Ports..................................................................................... 78
Table A.1: System I/O Ports ...................................................... 78
A.2 DMA Channel Assignments .................................................................... 79
Table A.2: DMA Channel Assignments ..................................... 79
A.3 1st MB Memory Map............................................................................... 79
Table A.3: 1st MB Memory Map ................................................ 79
A.4 Interrupt Assignments ............................................................................. 79
Table A.4: Interrupt Assignments .............................................. 79

Chapter 1
1General Information
This chapter gives background
information on the MIO-5375.
Sections include:
Introduction
Specifications
Block diagram

MIO-5375 User Manual 2
1.1 Introduction
MIO-5375 is designed using MI/O Extension form factor (compact series, 146 x 102
mm) and powered by 11th generation of Intel® Core™ U series processors. MIO-
5375 offers embedded iManager 3.0, SUSI 4.0 and WISE-PaaS/DeviceOn created
by Advantech to monitor and control system operation effectively and remotely.
MIO-5375 adopts the latest 64-bit, multi-core processors built on 10nm process tech-
nology for improvements in CPU processing, graphics, security and I/O flexibility.
1.2 Specifications
Platform
Processor i7-1185G7E i7-1185GRE i5-1145G7E i3-1115G4E
Max. Frequency 4.40 GHz 4.40 GHz 4.10 GHz 3.90 GHz
Base Frequency 1.80/ 2.8 GHz 1.80/ 2.8 GHz 1.50/ 2.6 GHz 2.20/ 3.0 GHz
Core/Tread 4/8 4/8 4/8 4/8
LLC 12MB 12MB 8MB 6MB
CPU cTDP-down/ Up/
Nominal 12W/ 15W/ 28W 12W/ 15W/ 28W 12W/ 15W/ 28W 12W/ 15W/ 28W
Chipset Intel® 300 Series Chipset (SoC Integrated)
BIOS AMI EFI 256Mbit
Memory
Technology DDR4-3200
Max. Capacity Up to 64GB
Channel/Socket Dual Channels / 2 Sockets
ECC Support No Yes No No
Graphics
Controller Integrated GFx Intel®UHD Graphics 630
Max. Frequency 3200MT/s 3200MT/s 3200MT/s 3200MT/s
Graphics Memory TBU
3D/HW Acceleration DX12, OGL4.0, OCL1.2, HW Encode: H.265/HEVC, H.264, MPEG2,
HW Decode: H.264
Display I/F
LCD
1 x LVDS: Dual Channel 18/24-bit, up to 1920 x 1200
Optional eDP1.4 HBR3, up to 4096x2304x36bpp@60Hz or
5120x3200x24bpp@24Hz
HDMI/DP
1 x HDMI 2.0b, up to 4Kx2Kx24bpp@60Hz
1 x DP1.4a, up to 4096x2304x36bpp@60Hz or
5120x3200x24bpp@60Hz
Multiple Display 4 simultaneous displays with each display interface combinations
External I/O
Ethernet 2 x GbE, LAN1: Intel i219LM, LAN2: Intel i210AT/IT (for industrial grade)
HDMI/DP 1/1
USB Type-C 1 x USB3.2 Gen. 2x2 20Gbps, support DP1.4a via Alt. Mode
USB3.2 4 x USB3.2 Gen. 2x1 10Gbps
LED Power status, SATA R/W
Power DC-Jack Optional

3 MIO-5375 User Manual
Chapter 1 General Information
Internal I/O
SATA 1 x SATA GenIII 6.0 Gbps
USB2.0 2
Serial Bus I2C (support 400Kbit/s), SMBus
COM Port 2 x RS-232/422/485 (support 1Mbps), 2 x RS-232 (4-wire, support
1Mbps)
GPIO 8-bit general purpose input output I/O
Audio Realtek ALC888, Line-in/Line-out/MIC
Inverter 12V/5V/3.3V selectable
LPC/SPI Bus -
CAN Bus 1 x CANBus 2.0
Fan 4-wire smart fan
Front Panel Control Power-on, Reset, Buzzer, SATA LED, CaseOpen
Board Feature
Watchdog Timer 65536 level, 0~65535 sec
TPM TPM2.0, Infineon SLB9670
iManager 3.0 SW API for Hardware Monitor, Smart Fan Control, Brightness Control,
I2C, GPIO, WDT
Expansion
M.2 E-Key 1 x E-Key 2230 (PCIe x1, USB2.0)
M.2 B-Key 1 x B-Key 3042 (USB2.0) w/ Nano-SIM
M.2 M-Key 1 x M-Key 2280 (PCIe x4 Gen.4 for PCIe SSD), optional SATA
MIOe
PCIex1 Port 0 Gen3
PCIex1 Port 1 Gen3
PCIex1 Port 2 Gen3
PCIex1 Port 3 Gen3
PCIe Bifurcation x1/x2/x4
DisplayPort 1
USB3.0 1
USB2.0 1
LPC Support
eSPI -
SMBus Support
Line-out Support
Power Supply 12V/5V
Power
Supply Voltage Vin: DC 12V-24V +/- 5%; RTC Battery: Lithium 3V/210mAH
Connector ATX 2x2 pin 90D, optional DC-Jack or ATX 2x2 pin 180D
Power Management AT, ATX
Environment
Temperature
Operating: Standard: 0 ~ 60° C (32 ~ 140° F), Extend: -40 ~ 85° C (-40 ~
185° F)
Storage: -40 ~ 85° C (-40 ~ 185° F)
Humidity Operating: 40° C @ 95% relative humidity, non-condensing
Storage: 60° C @ 95%relative humidity, non-condensing
Vibration Resistance 3.5 Grms
Software OS Windows10, Linux 20.04, Yocto BSP
Software& API WISE-DeviceOn, Edge AI Suite, iManager 3.0
Certification EMC CE, FCC Class B
Mechanical Dimensions 146 x 102 mm (5.7” x 4”)

MIO-5375 User Manual 4
1.3 Block Diagram
LVDS
2-CH 48-bit
M.2 E-Key 2230
PTN3460 DDI B
CH-0 CH-1
PCIex1, USB2.0, I2C
M.2 M Key 2280
GPIO 8-bit
I2CCANBus SMBus
PCIex4 Gen.4, opt. SATA
USB2.0*2
USB2.0
SATA Gen 3.
Nano SIMM.2 B Key 3042
SATA(default)
USB2.0
Audio
Line-in/out/MIC
COM1
RS-232/422/485
COM2
RS-232/422/485
COM3
RS-232
COM4
RS-232
SPI
SPI
CODEC ALC-888
TPM2.0 AES-256
256M BIOS
EIO-201
SPI
GbE (vPro) i219LM/-V PCIex1
GbE I210 PCIex1
eSPI
HDMI2.0b
DP
USB Type-C (TCP0) USB3.2, DP
USB 3.1 Gen.2
P1 – P4
USB3.1 + USB2.0
eDP 4-Lane DDI A
(TCP2)Type-C
(TCP1)Type-C
PCIex1 PCIex1 PCIex1 PCIex1 USB2.0
MIO Extension I/F
SMB Line-out Display
port LPC
eSPI-to-LPC
Intel
Tiger Lake-UP3 SoC
I7/i5/i3/Celeron
(15/28W)
DDR4-3200
Dual Channel
Up to 64GB
IBECC
DDR4-3200
Dual Channel
Up to 64GB
IBECC

Chapter 2
2Mechanical
This chapter gives mechanical
information on the MIO-5375.
Sections include:
Mechanical Drawing
Assembly Drawing

MIO-5375 User Manual 6
2.1 Introduction
The MI/O compact form factor SBC is a new-generation SBC design with a variety of
mechanical improvements. Here is the quick installation guide for our thermal design
and MIOe module installation.
This chapter includes board dimensions, our standard thermal solution, and MIOe
expansion board assembly.
2.2 Board Layout: Dimensions
Figure 2.1 MIO-5375 Mechanical Drawing (Top Side)


     











7 MIO-5375 User Manual
Chapter 2 Mechanical
Figure 2.2 MIO-5375 Mechanical Drawing (Bottom Side)
Figure 2.3 MIO-5375 Mechanical Drawing (Coastline)
       














           

MIO-5375 User Manual 8
Figure 2.4 MIO-5375 Mechanical Drawing (with Cooler)
Figure 2.5 MIO-5375 Mechanical Drawing (with Heatsink)
    















           







     
     







           




       










9 MIO-5375 User Manual
Chapter 2 Mechanical
Figure 2.6 MIO-5375 Mechanical Drawing (with Heat Spreader)
2.3 Quick Installation Guide
There is a Heatsink/Cooler (or optional heatspreader) in the white box inside the
package. Please assemble it by following the diagrams below. Remember to remove
the plastic on the thermal pad before you assemble the mechanical parts.
2.3.1 Cooler
     







           




       










MIO-5375 User Manual 10
2.3.2 Heatsink
2.3.3 Heatspreader (Option)

Chapter 3
3Installation
This chapter explains the setup
procedures of the MIO-5375 hard-
ware, including instructions on
setting jumpers and connecting
peripherals, switches and indica-
tors. Be sure to read all safety pre-
cautions before you begin the
installation procedure.