Advantech LGA 1700 User manual

User Manual
MIC-770 V3
Compact Fanless System with
12th Gen Intel® Core™ i CPU
Socket (LGA 1700)

MIC-770 V3 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2023
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Core™, Pentium® and Celeron® are trademarks of Intel® Corporation.
All other product names or trademarks are properties of their respective owners.
A Message to the Customer
Advantech Customer Service
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known.
Your satisfaction is our primary concern. Here is a guide to Advantech’s customer
services. To ensure you get the full benefit of our services, please follow the instruc-
tions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
Part No. Edition 1
Printed in China June 2023

iii MIC-770 V3 User Manual
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product is defective, follow the steps outlined below.
1. Collect all the information about the problem encountered (for example, CPU
speed, Advantech products used, other hardware and software used, etc.). Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.

MIC-770 V3 User Manual iv
Declaration of Conformity
FCC
This device complies with the requirements in part 15 of the FCC rules:
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this device in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her own expense. The
user is advised that any equipment changes or modifications not expressly approved
by the party responsible for compliance would void the compliance to FCC regula-
tions and therefore, the user's authority to operate the equipment.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.

v MIC-770 V3 User Manual
Warnings, Cautions, and Notes
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Caution! Cautions are included to help prevent hardware damage and data
losses. For example:
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Note! Notes provide additional information.

MIC-770 V3 User Manual vi
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If any of the following occurs, have the equipment checked by service person-
nel:
The power cord or plug is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
15. Do not leave the equipment in an environment with a storage temperature of
below -40 °C (-40 °F) or above 85 °C (185 °F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type as recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
17. In accordance with the IEC 704-1:1982 specifications, the sound pressure level
at the operator’s position does not exceed 70 dB (A).
18. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
DISCLAIMER: These instructions are provided according to IEC 704-1 standards.
Advantech disclaims all responsibility for the accuracy of any statements contained
herein.

vii MIC-770 V3 User Manual
Safety Precautions
Packing List
Before system installation, check that the items listed below are included and in good
condition. If any item does not accord with the list, contact your dealer immediately.
Warning! Always completely disconnect the power cord from your chassis when-
ever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sud-
den power surges. Only experienced electronics personnel should open
the PC chassis.
Caution! Always ground yourself to remove any static charge before touching the
motherboard. Modern electronic devices are very sensitive to static
electric discharges. As a safety precaution, use a grounding wrist strap
at all times. Place all electronic components on a static-dissipative sur-
face or in a static-shielded bag when they are not in the chassis.
Caution! The computer is provided with a battery-powered Real-time Clock cir-
cuit. There is a danger of explosion if the battery is incorrectly replaced.
Replace only with same or equivalent type recommended by the manu-
facturer. Discard used batteries according to the manufacturer’s instruc-
tions.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.
MIC-770 V3 bare-bone system x 1
Startup Manual EN\CN\TC for MIC-770 V3 1st
Ed. P/N: 2041077050
4-pin Phoenix connector P/N: 1652003234
2 x Mounting brackets P/N: 1960070543T00A
1 x SATA cable P/N: 1700013095-01
1 x SATA Power cable P/N: 1700024372-01
1 x CPU thermal grease P/N: 2170000093-01
2 x RAM thermal pads P/N: 1990019498N000

MIC-770 V3 User Manual viii
Ordering Information
Optional i-Module
* Please refer to the i-Module datasheet for more details.
** R680E SKU only.
Part
Number VGA HDMI
2.5''
HDD
/SSD
mSATA NVMe
M.2
USB3.2
(Gen2)
USB 3.2
(Gen1) USB 2.0 GbE COM PCIe/PCI Exp. Power
MIC-
770V3W
-00A1
1 1 1 1 1 2 6 0 2 2, up to 6
(Optional)
i-module
(Optional)
9~36
VDC
MIC-
770V3H-
00A1
1 1 1 1 0 0 4 4 2 2, up to 6
(Optional)
i-module
(Optional)
9~36
VDC
Module Number Description
4-slot expansion module
MIC-75M13-00A2 1 x PCIe x16+3xPCI slot i-module
2-slot expansion module
MIC-75M20-00C1 1 x PCIe x16+1xPCIe x4 slot i-module
MIC-75M20-01A2** 2 x PCIe x8 slot i-module
MIC-75M11-00A2 1 x PCIe x16+1xPCI slot i-module
1-slot expansion module
MIC-75M10-00A2 1 x PCIe x16 slot
Featured expansion module
MIC-75S00-00A1 2 x removable storage
MIC-75S20-00A2** 1 x PCIe x16+ 1 x PCIe x4 slot+ 2x2.5” swappable HDD/SSD
MIC-75G20-10B1 1 x PCIe x16 (Double Deck)+1xPCIe x4+2 x 2.5" hot-swap HDD/
SSD GPU slot i-module
MIC-75G30-00B1** 2 x PCIe x8 + 1 x PCIe x4 slot + 2 x 2.5" swappable HDD/SSD
MIC-75GF10-00A1 MIC-75GF10 MXM i-module, 1 PCIe x16 + 1 x PCIe x4
98R17520301 2 x 3.5" HDD kit

ix MIC-770 V3 User Manual
Optional Accessories
* Please refer to the Flex I/O datasheet for more details.
** AIIS-DIO32 requires a DB37 bracket (P/N: 1960068787N002)
*** R680E SKU only.
Part Number Description
96PSA-A230W24P4-3 ADP A/D 100-240V 230W 24V C14 TERMINAL BLOCK 4P
1702002600 Power cord (USA) UL/CSA, 3-pin, 10A, 125V, 1.83M, 180 D
1700008921 Power Cord PSE 3P 7A 125V 183cm
1702002605 Power Cord (EU), 3-pin, 10A, 250V 1.83M, 90D
96PSD-A240W24-MN* A/D 100-240V 240W 24V NDR DIN-Rail
1700031170-01 DC-DC power cord, A cable TEM*4/TEM*4 UL2464 18AWG 150 cm
1700029720-01 AC-DC power cord (US), M cable AC CONN 3P 183 cm
1700030520-01 AC-DC power cord (CN), M cable conn 3P CCC 10A 250V 150 cm
1700031408-01 AC-DC power cord (EU), M cable conn 3P/G-TEM*3 80 cm
AIIS-DIO32-00A1E** AIIS GPIO module (32-bit)
PCA-TPMSPI-00A1 TPM 2.0 module (SPI)
98R17500001 MIC DVI FIO
98R17500101 MIC HDMI/Remote power on/off FIO
98R17500301 MIC HDMI kit FIO
98R17500401 MIC Remote power on/off FIO
98R17500601 MIC COMport kit FIO
98R17500701 MIC Remote power on/off kit for SFIO
98R17500801 MIC Reset/Remote power on/off/5VDC kit FIO
98R17500901 MIC GPIO kit
98R17501001 MIC Display Port kit
98R17501101 MIC COM and HDMI kit
98910770301*** MIC NVMe + 4 LAN Advanced FIO
98910770401*** MIC NVMe Advanced FIO
98910770501*** MIC 4 PoE Advanced FIO
98R1752010E 2nd 2.5" HDD/SSD kit (used in 2-slot i-Module)
98R1752020E MIC Dual SSD kit
98R17500201 MIC DIN-Rail Mounting kit (90/180)
98R17500210 MIC DIN-Rail Mounting kit (180)
98R17500501 MIC Wall Mount kit
i-Door Module
(MOS series module)
Supports i-Door module (MOS series), except PoE
Please refer to the Advantech website below or search for "iDoor
Module Mini PCIe Expansion Kit”.
http://www.advantech.com.tw/products/idoor-module-mini-pcie-
expansion-kit/sub_bc858a7f-a52b-441b-a59c-f511289f98bc
i-Door Module
(PCM series module)
Supports i-Door module (PCM series) except PoE
Please refer to the Advantech website below:
http://www.advantech.com/products/idoor-technology-mini-pcieex-
pansion-kit/sub_efdb96af-a8f7-4cde-9592-dbf5c9794d16
Note: A bracket is required to affix the PCM series i-door module.
Please refer to P/N: 1960065854N001 i Door_bracket

MIC-770 V3 User Manual x
i-module Optional Accessories
Part Number Description
98R1751300E 1 x 8 cm FAN module (for MIC-75M13/75M40/75S20)
98R1752000E 2 x 4 cm FAN module (for MIC-75M20/MIC-75M11)