Advantech SOM-5899 User manual

User Manual
SOM-5899

SOM-5899 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2018
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2006589901 Edition 2
Printed in Taiwan June 2019

iii SOM-5899 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FM
This equipment has passed the FM certification. According to the National Fire Pro-
tection Association, work sites are classified into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the speci-
fications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages

SOM-5899 User Manual iv
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we welcome comments and
constructive criticism. Please send all such, in writing, to: [email protected]
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
SOM-5899 CPU module
1960081253T001 Heatspreader of SOM-5899
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.

v SOM-5899 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

SOM-5899 User Manual vi
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.

vii SOM-5899 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Functional Block Diagram ......................................................................... 4
1.3 Product Specifications............................................................................... 5
1.3.1 Compliance ................................................................................... 5
1.3.2 Feature List ................................................................................... 5
1.3.3 Processor System......................................................................... 6
1.3.4 Memory ......................................................................................... 6
1.3.5 Graphics/Audio ............................................................................. 6
1.3.6 Expansion Interface ...................................................................... 7
1.3.7 Serial Bus...................................................................................... 7
1.3.8 I/O ................................................................................................. 7
1.3.9 Power Management...................................................................... 9
1.3.10 Environment.................................................................................. 9
1.3.11 MTBF .......................................................................................... 10
1.3.12 OS Support (duplicate with SW chapter) .................................... 10
1.3.13 Advantech iManager ................................................................... 10
1.3.14 Power Consumption.................................................................... 11
1.3.15 Performance ............................................................................... 12
1.3.16 Selection Guide w/ P/N ............................................................... 12
1.3.17 Packing list.................................................................................. 12
1.3.18 Development Board .................................................................... 12
1.3.19 Optional Accessory ..................................................................... 12
1.3.20 Pin Description............................................................................ 13
Chapter 2 Mechanical Information ....................15
2.1 Board Information.................................................................................... 16
Figure 2.1 Board Chips ID – Front............................................. 16
Figure 2.2 Board Chips ID – Rear ............................................. 16
2.1.1 Connector List............................................................................. 17
Table 2.1: FAN1 Fan ................................................................. 17
2.2 Mechanical Drawing................................................................................ 17
Figure 2.3 Board Mechanical Drawing – Front .......................... 17
Figure 2.4 Board Mechanical Drawing – Rear........................... 18
Figure 2.5 Board Mechanical Drawing – Side ........................... 18
2.3 Assembly Drawing .................................................................................. 19
Figure 2.6 Assembly Drawing.................................................... 19
2.4 Assembly Drawing .................................................................................. 20
Figure 2.7 CPU 6C + GT2 Height and Tolerance ...................... 20
Figure 2.8 PCH Height and Tolerance....................................... 20
Chapter 3 AMI BIOS ............................................21
3.1 Starting.................................................................................................... 22
3.1.1 Main Setup.................................................................................. 23
3.1.2 Advanced BIOS Features Setup................................................. 25
3.1.3 Chipset........................................................................................ 55
3.1.4 Security ....................................................................................... 75
3.1.5 Boot Settings............................................................................... 79
3.1.6 Save & Exit ................................................................................. 80

SOM-5899 User Manual viii
Chapter 4 S/W Introduction & Installation........ 83
4.1 S/W Introduction ..................................................................................... 84
4.2 Driver Installation .................................................................................... 84
4.2.1 Windows Driver Setup ................................................................ 84
4.2.2 Other OS..................................................................................... 84
4.3 Advantech iManager ............................................................................... 84
Appendix A Pin Assignment................................. 87
A.1 SOM-5899 Type 6 Pin Assignment......................................................... 88
Appendix B Watchdog Timer................................ 93
B.1 Programming the Watchdog Timer ......................................................... 94
Appendix C Programming GPIO........................... 95
C.1 GPIO Register......................................................................................... 96
Appendix D System Assignments........................ 97
D.1 System I/O Ports..................................................................................... 98
Table D.1: System I/O ports....................................................... 98
D.2 Interrupt Assignments ........................................................................... 100
Table D.2: Interrupt Assignments ........................................... 100
D.3 1st MB Memory Map............................................................................. 101
Table D.3: 1st MB Memory Map .............................................. 101

Chapter 1
1General Information
This chapter gives background
information on the SOM-5899 CPU
Computer on Module
Sections include:
Introduction
Functional Block Diagram
Product Specification

SOM-5899 User Manual 2
1.1 Introduction
The SOM-5899 series is equipped with the 8th Generation Intel® Core™/ Xeon
Product Family designed by 14nm processor technology. This product supports
DDR4 2400MT/s with 1.2V power design, up to 48GB capacity, and memory ECC by
specific SKU. SOM-5899 supports higher memory bandwidth - with an i7-8850H SKU
upgrade to hexa-core for enhanced computing performance. SOM-5899 is able to
support PCIe x16 and 8 PCIex1, as well as PCIe x1, x2, x4, x8 configuration devices
via BIOS customization.
Compared with previous platforms, the SOM-5899 features a 50% growth in proces-
sor performance. It supports multiple-display options: dual-display and triple-display
can be realized. It offers HDMI/DisplayPorts with 4K2K resolution supported by SOM-
5899. Dual-channel for LVDS at 1920x1080 full HD resolution are also available.
The Advantech iManager (SUSI4) is designed to satisfy numerous embedded appli-
cation requirements such as a multi-level watchdog timer, voltage and temperature
monitoring, thermal protection and mitigation through processor throttling, LCD back-
light on/off and brightness control, and embedded storage for customized informa-
tion. Combining AdvantechWISE-PaaS/RMM, it can remotely monitor and control
devices through the Internet for easy maintenance. All Advantech COM Express
modules integrate iManager and WISE-PaaS/RMM for add-on value for customer
applications.
Capable of performance under extreme conditions, and featuring embedded platform
power consumption and various extensions and I/O interfaces, the SOM-5899 offers
a design that is computing intensive, thermal sensitive, graphics/media insensitive,
and appropriate for I/O demanding applications.

3 SOM-5899 User Manual
Chapter 1 General Information
Acronyms
Term Definition
AC'97 Audio CODEC (Coder-Decoder)
ACPI Advanced Configuration Power Interface - standard to implement power sav-
ing modes in PC-AT systems
BIOS Basic Input Output System - firmware in PC-AT system that is used to initial-
ize system components before handing control over to the operating system
CAN
Controller-area network (CAN or CAN-bus) is a vehicle bus standard
designed to allow microcontrollers to communicate with each other within a
vehicle without a host computer
DDI Digital Display Interface - containing DisplayPort, HDMI/DVI, and SDVO
EAPI
Embedded Application Programmable Interface
Software interface for COM Express© specific industrial function
System information
Watchdog timer
I2C Bus
Flat Panel brightness control
User storage area
GPIO
GbE Gigabit Ethernet
GPIO General Purpose Input Output
HDA
Intel High Definition Audio (HD Audio) refers to the specification released by
Intel in 2004 for delivering high definition audio that is capable of playing
back more channels at higher quality than AC'97
I2C
Inter Integrated Circuit - 2 wire (clock and data) signaling scheme allowing
communication between integrated circuits. Primarily used to read and load
register values
ME Management Engine
PC-AT "Personal Computer - Advanced Technology" - an IBM trademark term used
to refer to Intel based personal computers in 1990s
PEG PCI Express Graphics
RTC Real Time Clock - battery backed circuit in PC-AT systems that keeps system
time and date as well as certain system setup parameters
SPD Serial Presence Detect - refers to serial EEPROM on DRAMs that has
DRAM Module configuration information
TPM Trusted Platform Module, chip to enhance the security features of a computer
system
UEFI Unified Extensible Firmware Interface
WDT Watch Dog Timer

SOM-5899 User Manual 4
1.2 Functional Block Diagram

5 SOM-5899 User Manual
Chapter 1 General Information
1.3 Product Specifications
1.3.1 Compliance
PICMG COM.0 (COM Express) Revision 3.0
Basic Size - 125 x 95mm
Pin-out Type 6 compatible
1.3.2 Feature List
Feature
Type
Connector
Row Feature
Type 6 Define
SOM-5899
Max. Min.
Display
A-B LVDS Channel A (18/24-bit) 1 0 1
A-B LVDS Channel B (18/24-bit) 1 0 1
A-B eDP (muxed on LVDS Channel A) 1 0 1
A-B VGA 1 0 1
Expansion A-B PCI Express x1 6 1 6
A-B LPC 1 1 1
Serial
A-B SMBus 1 1 1
A-B I2C Bus 1 1 1
A-B Serial Port 2 0 2
A-B CAN Bus (muxed on SER1) 1 0 1
I/O
A-B LAN Port 0 (Gigabit Ethernet) 1 1 1
A-B SATA 4 1 4
A-B USB2.0 8 4 8
A-B USB Client 1 0 0
A-B HD Audio 1 0 1
A-B SPI Bus 2 1 1
A-B General Purpose I/O (GPIO) 8 8 8
A-B SDIO (muxed on GPIO) 1 0 1
A-B Watchdog Timer Output 1 0 1
A-B Speaker Out 1 1 1
A-B External BIOS ROM Support 2 0 2
A-B Power Button Support 1 1 1
A-B Power Good 1 1 1
A-B VCC_5V_SBY Contacts 4 4 4
A-B Sleep 1 0 1
A-B Thermal Protection 1 0 1
A-B Lid Input 1 0 1
A-B Battery Low Alarm 1 0 1
A-B Suspend/Wake Signals 3 0 3
A-B Fan PWM / Tachometer 2 0 2
A-B Trusted Platform Modules 1 0 1
Display C-D Digital Display Interfaces 1 - 3 3 0 3
I/O
C-D PEG (PCI Express x16) 1 0 1
C-D PCI Express x1 2 0 2
C-D USB3.0 4 0 4
C-D Rapid Shutdown 1 0 1

SOM-5899 User Manual 6
1.3.3 Processor System
1.3.4 Memory
There are a total of 3 sockets on SOM-5899, up to a 48GB capacity (supporting ECC
memory modules for specific SKU), 2 DDR4 260pin SODIMM sockets, different
channels on the front side (dual-channel), and 1 socket DDR4 SODIMM on the rear
side.
1.3.5 Graphics/Audio
Graphic Core: Intel® Gen9 HD/P630 Graphic supports DX12, OGL5.0, OCL2.1, and
MPEG2, HEVC/H265, VC1/WMV9 HW decode/encode/transcode acceleration.
CPU Std. Freq. Max. Turbo Freq. Core Cache (MB) TDP(W)
i7-8850H 2.6GHz 4.3GHz 6 9 45
i5-8400H 2.5GHz 4.2GHz 4 8 45
i3-8100H 3.0GHz NA 4 6 45
E-2176M 2.7GHz 4.4GHz 6 12 45
CPU Graphic Core Base Freq. Max Freq.
i7-8850H Intel®UHD Graphics 630 350MHz 1.15GHz
i5-8400H Intel®UHD Graphics 630 350MHz 1.10GHz
i3-8100H Intel®UHD Graphics 630 350MHz 1.00GHz
E-2176M Intel®UHD Graphics P630 350MHz 1.20GHz

7 SOM-5899 User Manual
Chapter 1 General Information
1.3.6 Expansion Interface
1.3.6.1 PCIe x1
PCI Express x1: Supports default 8 ports PCIe x1 compliant to PCIe Gen3 (8.0 GT/s)
specification, configurable to PCIe x4 or PCIe x2. Several configurable combinations
may need BIOS modification. Please contact to Advantech sales or FAE for more
detail.
1.3.6.2 LPC
Supports Low Pin Count (LPC) 1.1 specification, without DMA or bus mastering.
Allows connection to Super I/O, embedded controller, or TPM. LPC clock is 25MHz.
1.3.7 Serial Bus
1.3.7.1 SMBus
Supports SMBus 2.0 specification with Alert pin.
1.3.7.2 I2C Bus
Supports I2C bus 8-bit and 10-bit address modes, at both 100KHz and 400KHz.
1.3.8 I/O
1.3.8.1 Gigabit Ethernet
Ethernet: Intel I219LM Gigabit LAN supports 10/100/1000 Mbps Speed.
1.3.8.2 SATA
Supports 2 ports SATA Gen3 (6.0 Gb/s), backward compliant to SATA Gen2 (3.0 Gb/
s) and Gen1 (1.5 Gb/s). Maximum data rate is 600 MB/s. Supports AHCI 1.3.1 mode
(does not support IDE mode).
1.3.8.3 USB3.0 (3.1)/USB2.0
COM-Express supports USB3.0 but SOM-5899 supports 4 ports with USB3.1 Gen2
(10 Gbps) and 4 ports with USB2.0 (480 Mbps) which are backward compatible to
USB1.x. For USB3.1, product supports LPM (U0, U1, U2, and U3) manageability for
power savings.
Notice: To meet USB3.1 Gen2 performance, Advantech strongly recommends using
the certificated cable.
1.3.8.4 USB3.0
Type 6 Row A,B Row C,D
P0 P1 P2 P3 P4 P5 P6 P7
Default
Config.
X1 X1 X1 X1 X1 X1 X1 X1
Option 1 X1 X1 X2 X1 X1 X2
Option 2 X2 X2 X2 X2
Option 3 X4 X4
Type 6 P0 P1 P2 P3
SoC P0 P1 P2 P3
Type 6 OC_01 OC_23

SOM-5899 User Manual 8
1.3.8.5 USB2.0
1.3.8.6 SPI Bus
Supports BIOS flash only. SPI clock can be 50MHz, 33MHz, or 20MHz, with capacity
up to 16MB.
1.3.8.7 GPIO
8 programmable general purpose input or output (GPIO).
1.3.8.8 Watchdog
Supports multi-level watchdog time-out output. Provides 1-65535 level, from a 100ms
to 109.22 minute interval.
1.3.8.9 Serial Port
2 ports, 2-wire serial port (Tx/Rx) supports 16550 UART compliance.
–Programmable FIFO or character mode
–16-byte FIFO buffer on transmitter and receiver in FIFO mode
–Programmable serial-interface characteristics: 5, 6, 7, or 8-bit character
–Even, odd, or no parity bit selectable
–1, 1.5, or 2 stop bit selectable
–Baud rate up to 115.2K
1.3.8.10 TPM
Supports TPM 2.0 module by default.
1.3.8.11 Smart Fan
Supports 2 Fan PWM control signals and 2 tachometer input for fan speed detection.
Provides 1 on module with connector and the other to the carrier board following
PICMG COM Express R3.0 specifications.
1.3.8.12 BIOS
The BIOS chip is on module by default. Users can place BIOS chip on the carrier
board with appropriate design and jumper setting on BIOS_DIS#[1:0].
SoC USB_OC# OC_0 OC_2
Type 6 P0 P1 P2 P3
SoC P0 P1 P2 P3
Type 6 OC_01 OC_23
SoC USB_OC# OC_0 OC_2
BIOS_DIS0# BIOS_DIS#1 Boot up destination/function
Open Open Boot from Module’s SPI BIOS
Open GND SPI_CS0# to Carrier Board, SPI_CS1# to Module
GND GND SPI_CS0# to Module, SPI_CS1# to Carrier Board

9 SOM-5899 User Manual
Chapter 1 General Information
1.3.9 Power Management
1.3.9.1 Power Supply
Supports both ATX and AT power modes. VSB is for suspended power and can be
optional if not required by standby (suspend-to-RAM) support. RTC Battery may be
optional if keep time/date is not required.
VCC: 8.5V (9V-5%) – 20V (19V+5%)
VSB: 5V +/- 5% (Suspend power)
RTC Battery Power: 2.0V – 3.3V
1.3.9.2 PWROK
Power OK from the main power supply. A high value indicates the power level is
good. This signal can be used to hold off Module startup to allow Carrier-based
FPGAs or other configurable devices time to be programmed.
1.3.9.3 Power Sequence
According to PICMG COM Express COM.0 R 3.0 specification
1.3.9.4 Wake Event
Various wake-up events supports allowing users to apply different scenarios.
Wake-on-LAN(WOL): Wake to S0 from S3/S4/S5
USB Wake: Wake to S0 from S3
PCIe Device Wake: depends on user inquiry and may need customized BIOS
LPC Wake: depends on user inquiry and may need customized BIOS
1.3.9.5 Advantech S ECO Mode (Deep Sleep Mode)
Advantech iManager provides additional features allowing the system to enter very
low suspended power mode – S5 ECO mode. In this mode, the module will cut all
power, including suspended and active power into the chipset, and keep an on-mod-
ule controller active. Only under 50mW power will consume power, meaning user
battery packs can last longer. While this mode is enabled in the BIOS, system (or
module) only allows a power button to boot rather than others such as WOL.
1.3.10 Environment
1.3.10.1 Temperature
Operating: 0 ~ 60° C (32 ~ 140° F)
Storage: -40 ~ 85° C (-40 ~ 185° F)
1.3.10.2 Humidity
Operating: 40° C @ 95% relative humidity, non-condensing
Storage: 60° C @ 95% relative humidity, non-condensing
1.3.10.3 Vibrations
IEC60068-2-64: Random vibration test under operation mode, 3.5Grms
1.3.10.4 Drop Test (Shock)
Federal Standard 101 Method 5007 test procedure with standard packing
Note! If system COMS is cleared, Advantech strongly suggests going to the
BIOS setup menu and loading default settings at the first boot up.

SOM-5899 User Manual 10
1.3.10.5 EMC
CE EN55022 Class B and FCC Certifications: validated with standard development
boards in Advantech chassis
1.3.11 MTBF
Please refer Advantech SOM-5899 Series Reliability Prediction report on the web-
site: Link: http://com.advantech.com
1.3.12 OS Support (duplicate with SW chapter)
The mission of Advantech Embedded Software Services is to "enhance quality of life
with Advantech platforms and Microsoft Windows Embedded technology." We enable
Windows Embedded software products on Advantech platforms to more effectively
support the embedded computing community. Customers are freed from the hassle
of dealing with multiple vendors (hardware suppliers, system integrators, embedded
OS distributors) for projects. Our goal is to make Windows Embedded software solu-
tions easily and widely available to the embedded computing community.
To install drivers, please connect to the website http://support.advantech.com.tw to
download the setup file.
1.3.13 Advantech iManager
Supports APIs for GPIO, smart fan control, multi-stage watchdog timer, temperature
sensor, and hardware monitoring. Follows PICMG EAPI 1.0 specifications with back-
ward compatibility.

11 SOM-5899 User Manual
Chapter 1 General Information
1.3.14 Power Consumption
Hardware Configurations:
1. MB: SOM-5899C7Q-U6A1 (PCB: A101-2)
2. DRAM: 16GB DDR4 2400MHz *3
3. Carrier board: SOM-DB5830 A101-1
Testing Conditions:
1. Test temperature: room temperature (about 25°C)
2. Test voltage: rated voltage DC +12.0V
3. Test loading:
Maximum load mode: According to Intel thermal/power test tools
Burn-in mode: Burn InTest V8.1 Pro(1013)(CPU, RAM, 2D&3D Graphics and
Disk with 100%)
Idle mode: DUT power management off and not running any program
4. OS: Windows 10 Enterprise
Power Consumption Table (Watt.)
VCC=12V,
VSB=5V Active Power Domain Suspend Power Domain Mechanical off
Power State S0 Max. Load S0 Burn-in S0 Idle S5 S5 Deep Sleep RTC (uA)
SOM-
5899C7Q-
U6A1
42.093W 57.653W 7.120W 1.032W 0.473W 6.17uA

SOM-5899 User Manual 12
1.3.15 Performance
To compare performance or benchmark data with other modules, please refer to
“Advantech COM Performance & Power Consumption Table.”
1.3.16 Selection Guide w/ P/N
1.3.17 Packing list
1.3.18 Development Board
1.3.19 Optional Accessory
Part No. CPU Freq
.
Core
s
CPU
TDP PCH DDR4 Memory
Therma
l
Solutio
n
Operating
Temperatur
e
SOM-5899E6C-U7A1 E-
2176M 2.7 6 45W /35W
CM24
6
ECC/
non-ECC Active 0 ~ 60 °C
SOM-5899C7Q-
U6A1
i7-
8850H 2.6 6 45W /35W
CM37
0non-ECC Active 0 ~ 60 °C
SOM-5899C5Q-
U5A1
i5-
8400H 2.5 4 45W /35W
CM37
0non-ECC Active 0 ~ 60 °C
SOM-5899C3Q-
H0A1
i3-
8100H 3.0 4 45W /35W
CM37
0non-ECC Active 0 ~ 60 °C
SOM-5899E6CX-
U7A1
E-
2176M 2.7 6 45W /35W
CM24
6
ECC/
non-ECC Active -40 ~85 °C
SOM-5899C7QX-
U6A1
i7-
8850H 2.6 6 45W /35W
CM37
0non-ECC Active -40 ~85 °C
SOM-5899C5QX-
U5A1
i5-
8400H 2.5 4 45W /35W
CM37
0non-ECC Active -40 ~85 °C
SOM-5899C3QX-
H0A1
i3-
8100H 3.0 4 45W /35W
CM37
0non-ECC Active -40 ~85 °C
Part No. Description Quantity
- SOM-5899 CPU module 1
1960081253T001 Heatspreader of SOM-5899 1
Part No. Description
SOM-DB5830-00A1 COMe level. Board COMe R3.0 Type6 pint-out (SOM-DB5830)
Part No. Description
1960048820N001 Semi-Cooler 125 x 95 x 33 mm with 12V fan
1960073941T051 DHCS 125 x 95 x 43.7 with external 12V fan