Advantech ADAM-5510 Series Installation and operation manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

ADAM-5510 Series
PC Based Programmable
Controller
Startup Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual ii
Table of Contents
1 System Requirements...................................... 1
1.1 Host Computer Requirements ..................................... 1
1.2 ADAM-5510 Series Requirements ............................. 1
1.3 I/O Module Requirements........................................... 2
2 Hardware Installation..................................... 3
2.1 Power Wiring .............................................................. 3
2.2 Programming Port Wiring........................................... 4
2.3 Jumper Settings ........................................................... 5
3 I/O Module Configuration.............................. 6
3.1 Install ADAM-5510 Series Utility .............................. 6
3.2 Config. I/O Modules by ADAM-5510 Series Utility.. 7
4 Application Execution at Bootup................. 13
Part No. 2003551010 1st Edition
Printed in Taiwan August 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 ADAM-5510 Series Startup Manual
1 System Requirements
1.1 Host Computer Requirements
• IBM PC compatible computer with 486 CPU (Pentium is recom-
mended).
• Microsoft Windows 95/98/NT4.0 SP4/2000 or higher versions.
• Borland C++ 3.0 for DOS
• At least 32 MB RAM.
• 20 MB of hard disk space available
• VGA color monitor.
• CD-ROM.
• Mouse or other pointing devices.
• At least one standard RS-232 port (e.g. COM1, COM2).
1.2 ADAM-5510 Series Requirements
• One ADAM-5510 Series main unit, i.e., ADAM-5510M, ADAM-
5510E, ADAM-5510/TCP or ADAM-5510E/TCP.
• One ADAM-5510 Series Startup Manual
• One core clamp for power supply connection.
• One ADAM Products Utilities CD.
• Power supply for ADAM-5510 Series (+10 to +30 VDC unregulated)
• One RS-232 straight through DB-9 cable
• One null modem adaptor or cable with DB-9 connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1.3 I/O Module Requirements
At least one I/O module is needed to use the system. A variety of I/O
modules are available to meet different application requirements. Table
1.1 gives a current listing of these modules for your reference.
Table 1.1: I/O Module Support List
Module Name Specification Reference
ADAM-5013 3-ch. RTD input Isolated
ADAM-5017 8-ch. AI Isolated
ADAM-5017H 8-ch. High speed AI Isolated
ADAM-5018 7-ch. Thermocouple input Isolated
Analog I/O
ADAM-5024 4-ch. AO Isolated
ADAM-5050 7-ch. D I/O Non-isolated
ADAM-5051 16-ch. DI Non-isolated
ADAM-5051D 16-ch. DI w/LED Non-isolated
ADAM-5051S 16-ch. Isolated DI w/LED Isolated
ADAM-5052 8-ch. DI Isolated
ADAM-5055S 16-ch. Isolated DI/O w/LED Isolated
ADAM-5056 16-ch. DO Non-isolated
ADAM-5056D 16-ch. DO w/LED Non-isolated
ADAM-5056S 16-ch. Isolated DO w/LED Isolated
Digital I/O
ADAM-5056SO 16-ch. Iso. DO w/LED (source) Isolated
ADAM-5060 6-ch. Relay output Isolated
ADAM-5068 8-ch. Relay output Isolated
Relay Output
ADAM-5069 8-ch. Power Relay output Isolated
Counter/Frequen
c
ADAM-5080 4-ch. Counter/Frequency Isolated
Serial I/O ADAM-5090 4-port RS232 Non-isolated
ADAM-5510 Series Startup Manual 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

3 ADAM-5510 Series Startup Manual
2 Hardware Installation
2.1 Power Wiring
Power Supply +
+10~+30 Vdc -
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual 4
2.2 Programming Port Wiring
CD
RX
TX
DTR
GND
DSR
RTS
CTS
RI
1
2
3
4
5
6
7
8
9
N/A
TX
RX
N/A
GND
N/A
N/A
N/A
N/A
1
2
3
4
5
6
7
8
9
PC
Straight Through Cable
RS-232
COM3
(Prog. Port)
PC COM Port Straight Through Cable ADAM-5510 Series COM3
Analog Input
Analog Output
Digital Input
Digital Output
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

5 ADAM-5510 Series Startup Manual
2.3 Jumper Settings
DIP Switch of ID Address:
ID Address = Value of (SW1+SW2+SW3+SW4+SW5)
COM Port Selection for Configuration Tool:
SW7 and SW8 are reserved for future use.
DIP SW1 SW2 SW3 SW4 SW5
ON124816
OFF00000
DIP SW6
ON COM1/RS-232
OFF COM2/RS-485
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual 6
3 I/O Module Configuration
3.1 Install ADAM-5510 Series Utility
1. Insert the ADAM Products CD and setup the ADAM-5510 Series
Utility.
2. After the ADAM-5510 Series Utility has been installed, you will
find two directories under “C:\Program Files\Advantech\” direc-
tory. They are named “ADAM-5510M-5510E Utility” and
“ADAM-5510TCP-5510ETCP”.
If you are using ADAM-5510M or ADAM-5510E, you have to use
the files under the “ADAM-5510M-5510E Utility” directory.
If you are using ADAM-5510/TCP or ADAM-5510E/TCP, you
have to use the files under the “ADAM-5510TCP-5510ETCP Util-
ity” directory.
The directory structure is shown below:.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

7 ADAM-5510 Series Startup Manual
3.2 Configure I/O Modules by ADAM-5510 Series Utility
The following steps will use ADAM-5510/TCP as an example to demon-
strate how to configure the ADAM-5017 Analog Input Module.
1. Please click the “Program” directory under “ADAM-5510TCP-
5510ETCP Utility” and run “ADAM5510.EXE”, which is the
ADAM-5510 Series Utility. You will see the following figure.
2. Click the refresh button to check if the drive D: of ADAM-
5510TCP is detected correctly.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual 8
3. Click the refresh button to check if the D drive of ADAM-
5510TCP is detected correctly.
4. Download the I/O Module Configuration Tool “SIMU5KE.EXE”
under the “Config” directory onto drive D: of ADAM-5510/TCP.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

9 ADAM-5510 Series Startup Manual
5. Set DIP SW6 as ON.
COM Port Selection for Configuration Tool:
6. Set DIP SW1 to SW5 as OFF.
ID Address = 0
7. Run “SIMU5KE.EXE” and check the Communication Tool does
use COM1/RS-232 port.
DIP SW6
ON COM1/RS-232
DIP SW1 SW2 SW3 SW4 SW5
OFF00000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual 10
8. Connect the Host PC to COM1/RS-232 on ADAM-5510/TCP by a
null modem cable.
Analog Input
Analog Output
Digital Input
Digital Output
CD
RX
TX
DTR
GND
DSR
RTS
CTS
RI
1
2
3
4
5
6
7
8
9
CD
RX
TX
DTR
GND
DSR
RTS
CTS
RI
1
2
3
4
5
6
7
8
9
PC COM port ADAM-5510SeriesCOM1Null modem cable
RS-232
PC
Null modem cable
COM1 RS 232
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

11 ADAM-5510 Series Startup Manual
9. Insert the ADAM Products CD and setup the ADAM-4000-5000
Utility.
10. Close the ADAM-5510 Series Utility and run ADAM-4000-5000
Utility “ADAM40005000.EXE”.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual 12
11. Search the ADAM-5510/TCP Module and configure the input
range of the ADAM-5017 Analog Input Module.
12. Close the ADAM-4000-5000 Utility and reset the ADAM-5510/
TCP.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

13 ADAM-5510 Series Startup Manual
4 Application Execution at Bootup
The following steps will demonstrate how to automatically execute an
application after bootup. All that needs to be done is to update “AUTO-
RUN.BAT” and run “DHCPSTAT.EXE” automatically after boot up.
1. Download the “DHCPSTAT.EXE” onto ADAM-5510/TCP.
2. Edit “AUTORUN.BAT” under “Source\Drive_D\Default_Files”
directory.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ADAM-5510 Series Startup Manual 14
3. Update “AUTORUN.BAT” to ADAM-5510/TCP in the utility.
4. Reset ADAM-5510/TCP and check if the “DHCPSTAT.EXE” has
been executed correctly.
5. You are finished!
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra