Advantech MIC-3321 Installation and operation manual

1 Startup Manual
STARTUP MANUAL
MIC-3321 Series
3U CompactPCI Pentium M 760 2.0G High-performance Con-
troller
Before installation, please make sure that you have:
• MIC-3321 Series CPU Board
• Driver CD
• Quick Start User Manual
If anything is missing or damaged, contact your
distributor or sales representative immediately.
For detailed information on this product, refer to:
CD:MIC-3321\Manual\MIC-3321.pdf
FCC Class A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residen-
tial area is likely to cause interference in which case the
user is required to correct interference at his own expense.
CE
This product has passed the CE test for environmental spec-
ifications when shielded cables are used for external wiring.
We recommend the use of shielded cables. This kind of
cable is available from Advantech. Please contact your local
supplier for ordering information.
MIC-3321 is a 3U, all-in-one, controller board, compliant
with PICMG 2.0 R3.0 CompactPCI specifications. For high
computing performance, MIC-3321 uses an Intel Pentium
M 760 2.0GHz CPU and Intel 915GM chipset. This CPU
provides high performance with its on-chip 2 MB L2 cache
and is delivered in a Micro-FCBGA 479 package.
MIC-3321 offers powerful functions on a 3U-sized board
for performance-demanding applications like real-time
machine control and industrial automation.
Standard SBC Functions
CPU: MIC-3321 supports Intel Pentium M 2.0 GHz
Optional: Celeron M 1.0GHz/ Celeron M 800MHz
BIOS: Award 4 Mb flash memory
Chipset: Intel 915GM Graphics and Memory
Controller Hub (GMCH) Intel
82801FBM I/O Controller Hub (ICH6M)
System Memory:
Directed Soldered 512MB DDR2 533 SDRAM
(MIC-3321/3321S)
Directed Soldered 512MB DDR2 400 SDRAM
(MIC-3321C/3321CS)
Directed Soldered 256MB DDR2 400 SDRAM
(MIC-3321LS)
Max:1GB
P-IDE: One Channel IDE CompactFlash socket
type II*1 (select master/slave DIP-SW)
UltraDMA/100/66/33*a (2.5"HDD)
SATA: One external SATA Connector
Serial Ports: Two RS-232 ports with
16C550UARTs (or compatible) with 16-byte FIFO
buffer. One Front I/O, the other Rear I/O
Keyboard and PS/2 Mouse Connector:
One 6-pin mini-DIN connector is located on the
mounting bracket for easy connection to a keyboard
or PS/2 mouse
USB Port: Four USB2.0 Channels up to 480MB,
2 front I/O, 2 rear I/O
PCI-to-PCI Bridge: PERICOM P17C8150-32-bit/
33MHz CompactPCI interface
Ethernet channels with LED: 1COM port, 1 VGA-
CRT Channel, 1 PS/2 keyboard/mouse channel
(MIC-3321D-DE Only and must be used with MIC-
3521)
Watchdog Timer: Provides system reset and soft-
ware control. Time interval is programmable from 1
to 255 seconds/minutes
Ethernet LAN:
10/100/1000Base-TX Gigabit Ethernet
Controller Chips:
Two Intel 825723E/L PCI Express Gigabit
Ethernet Controllers support Pre-boot
Packing List Specifications
User Manual
Declaration of Conformity
Overview
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com/support/
This startup manual is for MIC-3321 Series
Part No. 2003332112 3rd Edition
May 2011

2 Startup Manual
Execution Environment (PXE)
Battery-backup RAM: 512 KB
Input /Output Bus Interface:
PCI 2.2 compliant, 32 bit/33 MHz
CompactPCI Compliance:
PICMG 2.0 R3.0 Compatible
Display
Controller: Intel Graphics Media Accelerator 900
VRAM: DVMT3.0 128MB
Resolution: Up to 2048x1536 with 32-bit color at 75Hz
Mechanical & Environmental Specifications
Board Size (W x H) : 160 x 100 mm (3U)
Operating Temperature:0 ~ 50° C
(Pentium M 2.0GHz & Celeron M 800MHz modules)
-25 ~ 70° C
(Celeron M 1.0GHz module)
Storage Temperature: -40 ~ 80° C
Board Weight: 0.6 kg
Table 1.1 lists the switch functions of MIC-3321 (be
sure that the switch is white one). Figure 1.3 and Figure
1.4 show the locations of S1 and S2, respectively.
Figure 1: MIC-3321 S1 Location (1F)
Figure 2: MIC-3321 S2 Location (2F)
Figure 3: MIC-3521 Connectors
Specifications
Switch Settings
DIP-SW Mode Setting Function
1F-S1 Mode Bit-1 : ON
LAN1 on Front I/O
Bit-2 : OFF
CF : Slave
Bit-1 : OFF
LAN1 on Rear I/O
Bit-2 : ON
CF : Master
2F-S2 Mode Bit-1 : ON
LAN2 on Front I/O
Bit-2 : OFF
N/C
Bit-1 : OFF
LAN2 on Rear I/O
Bit-2 : ON
N/C
Connector Locations

Startup Manual 3
Overview
MIC-3321 has a CD-ROM with utilities and drivers.
Please install the Chipset INF driver, VGA graphics
driver, and LAN driver.
Utilities and Drivers
The following utilities and drivers are provided with the
MIC-3321 series. You can also find updated description
of the utilities and drivers in the ReadMe.txt file on the
CD-ROM.Windows 2000/XP are fully supported by
the MIC-3321 series.
Intel Chipset Software Installation Utility
Path: Driver\Inf\I915GM
Available for the operating systems listed below:
• Microsoft Windows 2000
• Microsoft Windows XP
Intel VGA Graphics Driver
Path: Driver\VGA\915GM\
Available for the operating systems listed below:
• Microsoft Windows 2000
• Microsoft Windows XP
Intel Gigabit LAN Driver
Path: \Driver\Lan\82573E\
Available for the operating systems listed below:
• Microsoft Windows 2000
• Microsoft Windows XP
This chapter shows the pin assignments of MIC-3321
series CPU cards.
J1 & J2 Connectors
V(I/O):PCI buffer voltage form backplane
#: Low active
Software Configuration
Pin Assignments
Table 1.1: J1 Connectors
Pin A B C D E F
25 5V REQ6
4#
ENUM# 3.3V 5V GND
24 AD1 5V V(I/O) AD0 ACK64# GND
23 3.3V AD4 AD3 5V AD2 GND
22 AD7 GND 3.3V AD6 AD5 GND
21 3.3V AD9 AD8 GND C/BE0# GND
20 AD12 GND V(I/O) AD11 AD10 GND
19 3.3V AD15 AD14 GND AD13 GND
18 SERR# GND 3.3V PAR C/BE1# GND
17 3.3V N/C N/C GND PERR# GND
16 DEV-
SEL#
GND V(I/O) STOP# LOCK# GND
15 3.3V FRAM
E#
IRDY# GND TRDY# GND
12~
14
KEY
11 AD18 AD17 AD16 GND C/BE2# GND
10 AD21 GND 3.3V AD20 AD19 GND
9 C/BE3# N/C AD23 GND AD22 GND
8 AD26 GND V(I/O) AD25 AD24 GND
7 AD30 AD29 AD28 GND AD27 GND
6 REQ0# N/C 3.3V CLK0 AD31 GND
5 N/C N/C PCI_RS
T#
GND GNT0# GND
4 N/C GND V(I/O) N/C N/C GND
3 INTA INTB INTC 5V INTD GND
2 TCK 5V TMS TDO TDI GND
1 5V -12V TRST# 12V 5V GND

4 Startup Manual
J2 Connectors
#: Low active
Pin Assignments
Table 1.2: 64-Bit J2 Connectors
Pin A B C D E F
22 GA4 GA3 GA2 GA1 GA0 GND
21 CLK6 GND LAN2_M
D0+
LAN2_M
D2-
LAN2_
MD2+
GND
20 CLK5 N/C LAN2_M
D0-
GND LAN2_
MD3+
GND
19 N/C GND LAN2_M
D1+
LAN2_M
D1-
LAN2_
MD3-
GND
18 LAN1_
MD1-
LAN1_
MD0+
LAN1_M
D0-
GND CLK7 GND
17 LAN1_
MD1+
GND N/C REQ6# GNT6# GND
16 LAN1_
MD2+
LAN1_
MD2-
N/C GND N/C GND
15 LAN1_
MD3-
GND N/C REQ5# GNT5# GND
14 LAN1_
MD3+
VGA_H
S
VGA_VS GND VGA_G GND
13 VGA_D
DCDAT
GND N/C VGA_B VGA_R GND
12 VGA_D
DCCLK
USB_P
2+
USB_P2
-
GND N/C GND
11 USB_O
C2#
GND N/C USB_P- USB_P
+
GND
10 LAN1_L
INK/
ACT#
COM_
DSR2#
COM_C
TS2#
GND USB_O
C3#
GND
9COM_D
CD2#
GND N/C COM_RI
2#
LAN2_
LINK/
ACT#
GND
8COM_D
TR2#
COM_
RTS2#
COM_R
XD2
GND COM_
TXD2
GND
7 LAN1_S
PEED_1
00#
GND N/C GNT7# GND
6 LAN2_S
PEED_1
000#
LAN2_
SPEED
_100#
REQ7# GND LAN1_
SPEED
_1000#
GND
5 PS2_M
SDAT
N/C N/C PS2_MS
CLK
N/C GND
4 N/C N/C PS2_KB
CLK
GND PS2_K
BDAT
GND
3 CLK4 GND GNT3# REQ4# GNT4# GND
2 CLK2 CLK3 N/C GNT2# REQ3# GND
1 CLK1 GND REQ1# GNT1# REQ2# GND