Advantech UNO-348 User manual

User Manual
UNO-348 電腦
Compact Embedded Edge
Controller

UNO-348 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2022
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Intel®, Core™ and Atom™ are the trademarks of Intel® Corporation.
Microsoft Windows is registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Support
For more information on this and other Advantech products, please visit our website
at http://www.advantech.com
For technical support services, please visit our support website at http://sup-
port.advantech.com/
This manual applies to the following models. These are abbreviated as UNO-348
products in this article.
*Model name UNO-348
*Part number:
UNO-348-A531A
UNO-348-A941A
UNO-348-A533A
UNO-348-A943A
UNO-348-ANN3A
UNO-348-ANN3AW
UNO-348-ANN1A
UNO-348-ANN1AW
UNO348ANN1A2101-T, UNO348ANN1A2102-T, UNO348ANN1A2103-T,
UNO348ANN3A2101-T, UNO348ANN3A2102-T, UNO348ANN3A2103-T,
UNO348ANN1AW2101-T, UNO348ANN3AW2101-T, UNO348ANN1A2201-T,
UNO348ANN1A2202-T, UNO348ANN1A2203-T, UNO348ANN1A2204-T,
UNO348ANN1A2205-T, UNO348ANN3A2201-T, UNO348ANN3A2202-T,
UNO348ANN3A2203-T, UNO348ANN3A2204-T, UNO348ANN3A2205-T,
Part No. Edition 1
Printed in China January 2022

iii UNO-348 User Manual
UNO348ANN1AW2201-T, UNO348ANN1AW2202-T, UNO348ANN3AW2201-T,
UNO348ANN3AW2202-T, UNO348ANN1A2301-T, UNO348ANN1A2302-T,
UNO348ANN1A2303-T, UNO348ANN1A2304-T, UNO348ANN1A2305-T,
UNO348ANN3A2301-T, UNO348ANN3A2302-T, UNO348ANN3A2303-T,
UNO348ANN3A2304-T, UNO348ANN3A2305-T, UNO348ANN1AW2301-T,
UNO348ANN3AW2301-T, UNO348ANN1A2401-T, UNO348ANN1A2404-T,
UNO348ANN3A2401-T, UNO348ANN1AW2302-T, UNO348ANN3AW2302-T
UNO348ANN1A2402-T, UNO348ANN1A2405-T, UNO348ANN3A2402-T,
UNO348ANN1A2403-T, UNO348ANN3A2403-T, UNO348ANN3A2404-T,
UNO348ANN1AW2401-T, UNO348ANN3AW2401-T, UNO348ANN1A2501-T,
UNO348ANN3A2405-T, UNO348ANN1AW2402-T, UNO348ANN3AW2401-T,
UNO348ANN1A2502-T, UNO348ANN3A2503-T, UNO348ANN1A2504-T,
UNO348ANN3A2501-T, UNO348ANN1A2505-T, UNO348ANN3A2502-T,
UNO348ANN3A2503-T, UNO348ANN1A2504-T, UNO348ANN3A2501-T,
UNO348ANN3A2504-T, UNO348ANN1AW2501-T, UNO348ANN3AW2501-T,
UNO348ANN1A2601-T, UNO348ANN1A2604-T, UNO348ANN3A2601-T,
UNO348ANN3A2604-T, UNO348ANN1AW2601-T, UNO348ANN3AW2601-T,
UNO348ANN1A2701-T, UNO348ANN1A2704-T, UNO348ANN3A2701-T,
UNO348ANN3A2704-T, UNO348ANN1AW2701-T, UNO348ANN3AW2701-T,
UNO348ANN1A2505-T, UNO348ANN3A2502-T, UNO348ANN3A2505-T,
UNO348ANN3AW2501-T, UNO348ANN3AW2502-T, UNO348ANN1A2602-T,
UNO348ANN1A2605-T, UNO348ANN3A2602-T, UNO348ANN3A2605-T,
UNO348ANN1AW2602-T, UNO348ANN3AW2602-T, UNO348ANN1A2702-T,
UNO348ANN1A2705-T, UNO348ANN3A2702-T, UNO348ANN3A2705-T,
UNO348ANN1AW2702-T, UNO348ANN3AW2702-T, UNO348ANN3A2503-T,
UNO348ANN1A2603-T, UNO348ANN3A2603-T, UNO348ANN1A2703-T,
UNO348ANN3A2703-T

UNO-348 User Manual iv
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
type of cable is available from Advantech. Please contact your local supplier for
ordering information.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference. In
this event, users are required to correct the interference at their own expense.

v UNO-348 User Manual
甲類資訊技術設備
甲類設備為其他符合甲類設備限制值之資訊技術設備，而非符合乙類資訊技術設備的
限制值；雖然不可限制此類設備之行銷，但使用場所必須被限制，不得進行居住的環
境中，且應於其機器本體及使用說明書中含有下列警語:
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Safety Precautions - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from the PC chassis
before manual handling. Do not touch any components on the CPU card or
other cards while the PC is powered on.
Disconnect the power before making any configuration changes. A sudden rush
of power after connecting a jumper or installing a card may damage sensitive
electronic components.

UNO-348 User Manual vi
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If any of the following occurs, have the equipment checked by service person-
nel:
–The power cord or plug is damaged.
–Liquid has penetrated the equipment.
–The equipment has been exposed to moisture.
–The equipment is malfunctioning, or does not operate according to the user
manual.
–The equipment has been dropped and damaged.
–The equipment shows obvious signs of breakage.
15. Do not leave the equipment in an environment with a storage temperature of
below -40° C (-40° F) or above 85° C (185° F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type as recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
17. In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator’s position does not exceed 70 dB (A).
18. This product is intended to be supplied by an UL certified power supply or dc
source with mating connector, rated 10-36Vdc, 16A-4.44A minimum and Tma
50 degree. If you need further assistance, please contact Advantech for further
information.
19. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet. The power outlet socket should have a grounded
connection.
20. For use in pollution free environments and indoor use.
21. This equipment is not suitable for use in locations where children are likely to be
present.

vii UNO-348 User Manual
22. If the equipment is used in a manner not specified by the Advantech, the protec-
tion provided by the equipment may be impaired.
23. The equipment contains no user-serviceable parts. Do not open, Return to man-
ufacturer for servicing.
24. Do not block air ventilation holes.
25. Restricted Access Area: The equipment should only be installed in a Restricted
Access Area.
DISCLAIMER: These instructions are provided according to IEC 704-1 standards.
Advantech disclaims all responsibility for the accuracy of any statements contained
herein.
26. Do not modify the construction of equipment or expand any hardware board/
devices. Please return to the authorized dealer for any installation, replacement,
repair, update or service.
Consignes de sécurité
1. Lire attentivement les instructions de sécurité.
2. Conserver ce manuel pour utilisation ultérieure,
3. Débranchez cet équipement de toute prise secteur avant le nettoyer. Utilisez
seulement un chiffon humide. N'utilisez pas de détergent liquide ou pulvérisé
pour le nettoyage.
4. Gardez cet équipement à l'abri de l'humidité.
5. Placez cet équipement sur une surface fiable pendant l'installation. Le faire ou
bien le laisser tomber peut causer des dégâts.
6. Les ouvertures sur l'enceinte servent à la convection de l'air. Protégez l'équipe-
ment contre surchauffe. NE COUVREZ PAS LES OUVERTURES.
7. Assurez-vous que la tension de la source d'alimentation est correcte avant de
connecter l'équipement à une prise de courant. La prise de courant doit avoir
une connexion à la terre.
8. Placez le câble d'alimentation de manière à ce que personne ne puisse marcher
dessus. Ne placez rien sur le câble d'alimentation.
9. Toutes les mises en garde et tous les avertissements sur l'équipement doivent
être notés.
10. Si l'équipement n'est pas utilisé pendant une longue période, débranchez-le de
la source d'alimentation pour éviter tout endommagement dû à une surtension
transitoire.
11. Ne jamais verser de liquide dans une ouverture. Cela pourrait provoquer un
incendie ou un choc électrique.
12. N'ouvrez jamais l'équipement. Pour des raisons de sécurité, l'équipement doit
être ouvert uniquement par du personnel qualifié.
13. Si l'une des situations suivantes se présente, faites vérifier l'équipement par le
personnel de service:
un liquide a pénétré dans l'équipment
L'équipement a été exposé à l'humidité.
L'équipement ne fonctionne pas bien, ou vous ne pouvez pas le faire
fonctionner selon le manuel de l'utilisateur.
The equipment does not work well, or you cannot get it to work according to
the user's manual
Caution: Hot surface. Do not touch for Top Heatsink.

UNO-348 User Manual viii
L'équipement est tombé et endommagé
L'équipement présente des signes évidents de rupture.
14. NE LAISSEZ PAS CET ÉQUIPEMENT DANS UN ENVIRONNEMENT OU LA
TEMPÉRATURE DE STOCKAGE PEUT ÊTRE INFÉRIEURE À -40° C (-4° F)
OU BIEN SUPÉRIEURE À 85° C (185° F). CECI POURRAIT ENDOMMAGER
L'EQUIPEMENT. L'ÉQUIPEMENT DEVRAIT ÊTRE DANS UN ENVIRONNE-
MENT CONTRÔLÉ.
15. Ce produit est destiné à être alimenté par une source d'alimentation certifiée UL
ou par une source cc convenant à une utilisation à une température minimale
de 40 degrés Celsius, dont la sortie est conforme à la norme SELV et dont la
puissance nominale est de 10 Vdc, 7.7 A, en cas de besoin. contactez Advant-
ech pour plus d'informations.
16. Pour une utilisation dans des environnements non polluant et à l'intérieur.
17. C'est appareil ne doit pas être utilisé dans des endroits où se trouvent des
enfants.
18. Si l'équipement est utilisé d'une manière non spécifiée par le fabricant, la pro-
tection fournie par l'équipement peut être altéré
19. L'équipement ne contient aucune pièce réparable par l'utilisateur. Ne pas ouvrir,
retourner au fabricant pour réparation.
20. Ne bloquez pas les ou es de ventilation.
21. Il s'agit d'un équipement de type ouvert et doit être installé dans un boîtier
approprié
ATTENTION: Danger d'explosion si la batterie est mal remplace. Remplacer unique-
ment par le meme type ou equivalent recommandé par le fabricant. Jeter les piles
usagées selon les instructions du fabricant.
安全指示
1. 請仔細閱讀此安全操作說明。
2. 請妥善保存此用戶手冊供日後參考。
3. 用濕抹布清洗設備前，請確認拔除電源線。請勿使用液體或去污噴霧劑清洗設
備。
4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。
5. 請勿在潮濕環境中試用設備。
6. 請在安裝前確保設備放置在可靠的平面上，意外摔落可能會導致設備損壞。
7. 設備機殼的開孔適用於空氣對，從而防止設備過熱。請勿覆蓋開孔。
8. 當您連接設備到電源插座前，請確認電源插座的電壓符合要求。
9. 請將電源線佈置在人們不易絆倒的位置，請勿在電源線上覆蓋任何雜物。
10. 請注意設備上所有的警告標示。
11. 如果長時間不使用設備，請拔除與電源插座的連結，避免設備被超標的電壓波動
損壞。
12. 請勿讓任何液體流入通風口，以免引起火灾或短路。
13. 請勿自行打開設備。為了確保您的安全，請透過經認證的工程師來打開設備。
14. 如遇下列情况，請由專業人員維修：
電源線或插頭損壞；
設備內部有液體流入；
設備曾暴露在過度潮濕環境中使用；
Attention: Surface chaude, ne pas toucher pour le dissipateur ther-
mique supérieur.

ix UNO-348 User Manual
設備無法正常工作，或您無法透過用戶手冊來正常工作；
設備摔落或損壞；
設備有明顯外觀損；
15. 請勿將設備放置在超出建議溫度範圍的環境，即不要低於 -40° C （-40° F）或
高於 85° C （185° F），否則可能會造成設備損壞。
16. 注意：若電池更換不正確，將有爆炸危險。因此，只可以使用製造商推薦的同一
種或者同等型號的電池進行替換。請按照製造商的指示處理舊電池。
17. 根據 IEC 704‐1:1982 規定，操作員所在位置音量不可高於 70 分貝。
18. 限制區域：請勿將設備安裝於限制區域使用。
19. 免責聲明：請安全訓示符合 IEC 704‐1 要求。研華公司對其內容之準確性不承
擔任何法律責任。

UNO-348 User Manual x

xi UNO-348 User Manual
Contents
Chapter 1 Overview...............................................1
1.1 Introduction ............................................................................................... 2
1.2 Safety Precautions.................................................................................... 2
1.3 Packing List............................................................................................... 3
1.4 Sku Information......................................................................................... 3
1.5 Hardware Specifications ........................................................................... 4
1.5.1 General ......................................................................................... 4
1.5.2 System Hardware ......................................................................... 4
1.5.3 I/O Interfaces ................................................................................ 4
1.5.4 Environment.................................................................................. 5
1.5.5 Certification................................................................................... 5
1.6 Dimensions ............................................................................................... 6
1.6.1 UNO-348-AXX1A Dimensions ...................................................... 6
Figure 1.1 UNO-348 (1 Slot) Dimensions.................................... 6
1.6.2 UNO-348-AXX3A Dimensions ...................................................... 6
Figure 1.2 UNO-348 (3 slot) Dimensions..................................... 6
Chapter 2 Hardware Functionality.......................7
2.1 Introduction ............................................................................................... 8
Figure 2.1 Diagram of Connector Locations on UNO-348 of Moth-
erBoard (Top Side)..................................................... 8
Figure 2.2 Diagram of Key Components Location on UNO-348 of
MotherBoard (Bottom Side)........................................ 8
Table 2.1: Key Components, Connectors on Board.................... 9
Figure 2.3 Diagram of Key Components Location on UNO-348-
AXX1A (1 Slot) of Backplane Board (TOP Side)........ 9
Figure 2.4 Diagram of Key Components Location on UNO-348-
AXX1A (1 Slot) of Backplane Board (IO 1-slot Bottom
Side) ......................................................................... 10
Table 2.2: Key components, Connectors on IO 1-slot Board .... 10
Figure 2.5 Diagram of Key Components Location on UNO-348-
AXX3A (3 Slot) of Backplane Board (TOP Side)...... 11
Figure 2.6 Diagram of Key Components Location on UNO-348-
AXX3A (3 Slot) of Backplane Board (Bottom Side).. 11
Figure 2.7 Diagram of Key Components Location on UNO-348-
AXX3AW (3 Slot) of Backplane Board (TOP Side)... 12
Figure 2.8 Diagram of Key Components Location on UNO-348-
AXX3AW (3 Slot) of Backplane Board (Bottom Side)
.................................................................................. 12
2.2 External I/O Connector............................................................................ 13
Figure 2.9 Front View of UNO-348-AXX1A (1 Slot)................... 13
Figure 2.10Front View of UNO-348-AXX3A (3 Slot)................... 13
2.2.1 Power Connector ........................................................................ 13
2.2.2 LAN: Ethernet Connector............................................................ 13
2.2.3 USB Connector........................................................................... 13
2.2.4 Display Connector....................................................................... 14
2.2.5 COM Connector.......................................................................... 14
Figure 2.11DB9 Pin Number (COM/GPIO)................................. 14
Table 2.3: COM Connector Pin Assignments............................ 14
2.2.6 GPIO........................................................................................... 15
2.2.7 Audio........................................................................................... 15
2.2.8 Remote Power Control................................................................ 15
2.3 Internal I/O Connectors and Switches..................................................... 16

UNO-348 User Manual xii
Figure 2.12Locations Internal I/O Connectors/Switches for UNO-
348 ........................................................................... 16
Table 2.4: Internal Connectors and Jumper Switches............... 16
Table 2.5: Internal Connectors and Jumper Switches............... 17
Table 2.6: Internal Connectors and Jumper Switches............... 18
Table 2.7: Internal Connectors and Jumper Switches............... 19
2.3.1 M.2 Connector ............................................................................ 19
2.3.2 mPCIe Connector ....................................................................... 19
2.3.3 PCIe x16 Connector ................................................................... 20
2.3.4 PCI Connector ............................................................................ 20
2.4 Others ..................................................................................................... 20
Figure 2.13LED Indicators, Reset Buttons, and Antenna Hole of
UNO-348-AXX1A (1 Slot)......................................... 20
Figure 2.14LED Indicators, Reset Buttons, and Antenna Hole of
UNO-348-AXX3A (3 Slot)......................................... 20
2.4.1 LED Indicators ............................................................................ 20
2.4.2 Reset Buttons ............................................................................. 21
2.4.3 Antenna Hole.............................................................................. 21
Figure 2.15Illustration of antenna installed................................. 21
Chapter 3 Initial Setup........................................ 23
3.1 Chassis Grounding ................................................................................. 24
Figure 3.1 Chassis Grounding Connection Diagram of UNO-348-
AXX1A (1 Slot) ......................................................... 24
Figure 3.2 Chassis Grounding Connection Diagram of UNO-348-
AXX3A (3 Slot) ......................................................... 24
3.2 Connecting Power................................................................................... 25
3.3 Storage Installation (Optional) ................................................................ 26
3.3.1 Installing a 2.5” HDD/SSD .......................................................... 26
3.3.2 Installing M.2 2280 Module......................................................... 28
3.3.3 Installing M.2 3042/2242 Module................................................ 29
3.3.4 Installing M.2 3052 Module......................................................... 30
3.3.5 Installing GPIO............................................................................ 32
3.3.6 Installing IDOOR......................................................................... 34
3.4 Wall Mount and Stand Mount Installation ............................................... 37
3.4.1 Wall mount.................................................................................. 37
3.4.2 Stand mount ............................................................................... 39
3.5 Remote Power/Reset Setting.................................................................. 42
3.6 AT/ATX Setting (CN10)........................................................................... 42
3.7 BIOS Setting ........................................................................................... 42
Appendix A System Settings/Pin Assignment.... 43
A.1 Power Connector (BP_CN1)................................................................... 44
Table A.1: Power Connector Pin Assignments.......................... 44
A.2 LAN: Ethernet Connector (LAN1, LAN2, LAN3) ..................................... 44
Table A.2: Ethernet Connector Pin Assignments ...................... 44
A.3 USB Connector (LAN1_USB3C1, LAN2_USB3C2, LAN3_USB3C3)..... 45
A.3.1 USB 2.0 Connector..................................................................... 45
Table A.3: Connector Pin Assignments..................................... 45
A.3.2 USB 3.0 Connector..................................................................... 45
Table A.4: USB 3.0 Connector Pin Assignments....................... 45
A.4 Display Connector (CN1), HDMI Connector (CN1)................................. 46
Table A.5: DisplayPort Adapter Cable Pin Assignments ........... 46
Table A.6: HDMI Adapter cable Pin Assignments ..................... 47
A.5 M.2 Connector (CN6).............................................................................. 48
Table A.7: M.2 B Key Connector Pin Assignments ................... 48
A.6 mPCIe Connector (MINIPCIE2_MSATA1).............................................. 49

xiii UNO-348 User Manual
Table A.8: mPCIe Connector Pin Assignments ......................... 49
A.7 COM Port RS232/422/485 Settings ........................................................ 50
A.8 TPM 2.0 BIOS Setting............................................................................. 54
A.9 CPU Turbo Mode BIOS Setting ............................................................. 55

UNO-348 User Manual xiv

Chapter 1
1Overview
This chapter overviews specifica-
tions for UNO-348.
Introduction
Safety Precautions
Accessories
Hardware Specifications
Dimensions

UNO-348 User Manual 2
1.1 Introduction
UNO-348 is a high-performance, fanless, embedded edge controller supports 10th
gen. Intel® Core i CPU. Despite its compact size, UNO-348 offers multiple I/O includ-
ing 4 x USB 3.2, 2 x USB 2.0, 3 x GigaLAN, 2 x RS-232/422/485, and 1 x RS-232
ports, as well as 1 x Line-out, 1 x Mic-in, 1 x DisplayPort, and 1 x HDMI interfaces.
Designed to deliver high-performance computing and maximum flexibility for indus-
trial automation applications, UNO-348 also features 2 x internal HDD/SSD bays, 1 x
full-size mPCIe, 1 x M.2 B-key, and up to 3 x PCIe/PCI expansion slots (1 x PCIe x16,
2 x PCI) to support the integration of optional peripherals. In addition to dual power
inputs that ensure a stable power supply, UNO-348 is equipped with Advantech's
iBMC technology to support remote OOB(out-of-band) power management to reduce
system downtime and operational costs.
1.2 Safety Precautions
Below are a few safety precautions for preventing injury when making connections. In
most cases, users can use a standard cable for connection.
Warning! Always disconnect the power cord from the chassis before manual han-
dling. Do not connect the chassis while the system power is on. A sud-
den rush of power can damage sensitive electronic components. Only
experienced electronics personnel should open the chassis.
Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant
toucher UNO-348. Appareils électroniques modernes sont très sensi-
bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.
Caution! Always ground yourself to remove any static electric charge before
touching UNO-348. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static
shielded bag.
Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque
vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro-
niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.

3 UNO-348 User Manual
Chapter 1 Overview
1.3 Packing List
Please refer to below packing list:
1 x UNO-348 system
1 x UNO-348 Bracket Mounting
1 x M.2 Bracket Marked “A” (Support 3042 card,)
1 x M.2 Bracket Marked “B” (Support 3052 card)
1 x 2P Plug-in block for remote power on/ off function
1 x 4P Plug-in block for power connector
3 x M3x4L screws for M.2 Bracket
8 x M3x4L screw for SSD
1 x M2x4L screw for mini PCIE
1 x Earth-Ground cable
Quick Start Guide
Simplified Chinese manual
China RoHs sheet
Warranty card
For UNO-348-ANN1A/ UNO-348-ANN3A, there’s an additional accessory bag for
post-assemble as below:
1 x Grease for CPU
17 x M3x6L Screw for Chassis
4 x M3x4L Screw for Mother Board
If anything is missing or damaged, contact your distributor or sales representative
immediately.
1.4 Sku Information
UNO-348 provides pre-configured version of CPU/RAM and barebone version
Here's the sku information. You need to purchase
CPU and RAM additionally when ordering UNO-348-ANN1A and UNO-348-ANN3A.
We also provide optional backplane for 3 slot version to upgrade to PCIe spec.

UNO-348 User Manual 4
1.5 Hardware Specifications
1.5.1 General
1.5.2 System Hardware
1.5.3 I/O Interfaces
Dimensions (W x D x H) UNO-348 (1 slot): 200 x 140 x 120 mm (7.8 x 5.5 x 4.7 in)
UNO-348 (3 slot): 200 x 140 x 160 mm (7.8 x 5.5 x 6.3 in)
Weight (Net) UNO-348 (1 slot): 3.5 kg (7.7 lbs)
UNO-348 (3 slot): 4 kg (8.8 lbs)
Mounting Wall mount, Stand Mount
Power Requirement
10 - 36VDC
Power should be fixed at 24VDC (± 20%) when total power
consumption exceeds 160W.
Power Rating 16A~4.44A
Power Consumption
59W (typical),100W (Max) without installing PCIe/PCI card.
Note:
PCIex16 slot supports up to 75W
PCIex 4 slot supports up to 25W
PCIex1 slot supports up to 10W
PCI slot supports up to 25W
BIOS AMI UEFI 128Mbit(H420)
Watchdog Timer Programmable 255 levels timer interval, from 1 to 255 sec
Hardware Security TPM 2.0
Processor Intel® 10th Gen Core™ i socket type CPU (LGA1200)
Chipset Intel H420E (W480 available upon request)
Memory 2 x 260-pin DDR4 SODIMM (up to 32GB per socket)
Maximum capacity up to 64GB
Graphics Engine Intel® HD Graphics
Storage/Expansion
2 x 2.5" SSD/HDD bay
1 x M.2 B-key (SATA/USB 3.0 signal) for 2242/2280 SATA
SSD or 3042/3052 LTE/5G module expansion
1 x Full-size mPCIe (PCIe / USB2.0 signal)
UNO-348-AXX1A: 1 x PCIex16
UNO-348-AXX3A: 1 x PCIex16, 2 x PCI
Serial Ports 2 x RS-232/422/485, 1 x RS-232. 50bps~115.2 kbps (DB9)
LAN Ports 3 x RJ45,10/100/1000 Mbps IEEE 802.3u 1000BASE-T
Fast Ethernet (RJ-45)
USB Ports 4 x USB 3.2 Gen1, and 2 x USB 2.0 (Type A)
Displays 1 x DP 1.4, supports, 4096x2306@60Hz (DP++)
1 x HDMI 1.4 supports 4096x2160@30Hz
Power Connector 1 x 2 Pin (terminal block)

5 UNO-348 User Manual
Chapter 1 Overview
1.5.4 Environment
1.5.5 Certification
Operating Temperature
-20 ~ 50 °C (-4 ~ 122 °F) with 0.7m/s airflow environment, with
wide-temperature (-40 ~ 85 °C/-40 ~ 185 °F) peripheral (e.g.
Memory, 2.5" SSD, wireless modules)
Storage Temperature -40 ~ 85 °C (-40 ~ 185 °F)
Relative Humidity 95% RH @ 40 °C/104 °F, non-condensing
Shock Protection Operating, IEC 60068-2-27, 50G, half sine, 11ms
Vibration Protection Operating, IEC 60068-2-64, 4Grms, random, 5 ~500Hz, 1hr/
axis (SSD)
Ingress Protection IP20
Certification CE, FCC, CB, UL, CCC, BSMI, CAN ICES-003(A)/NMB-
003(A)

UNO-348 User Manual 6
1.6 Dimensions
1.6.1 UNO-348-AXX1A Dimensions
200 x 140 x 120 mm (7.8 x 5.5 x 4.7 in) (W x D x H)
Figure 1.1 UNO-348 (1 Slot) Dimensions
1.6.2 UNO-348-AXX3A Dimensions
200 x 140 x 160 mm (7.8 x 5.5 x 6.3 in) (W x D x H)
Figure 1.2 UNO-348 (3 slot) Dimensions