AETEK C70-00A-01 User manual

1. Install the Switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 30W / 65W.
C70-00A-01
C70-00E-01
Quick Installation Guide
The C70-00A-01/C70-00E-01 is a 10/26 port 10/100/1000BaseT managed switch. It provides a reliable infrastructure for
your business network and deliver intellilgent features. Moreover, this switch also comes with the functionality specically
designed for managing IP cameras and for a quick access to connected devices.
IMPORTANT:
INTRODUCTION
C70-00E-01 CONNECTION
* 1x Switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)
PACKAGE CONTENTS
Front Panel Rear Panel
C70-00A-01 CONNECTION
Front Panel Rear Panel
Master PoECam L2+ Managed Switch

AETEK INC.
3F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T:[phone]|W:www.aetektec.com|E:[email protected]
LED DEFINITIONS
All specications are subject to change without noice.
Copyright © 2017 AETEK INC. All rights reserved.
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
User name admin
Password admin
DEFAULTS
System Green ON Lit when power is on and normal. Off when power is disconnected.
Below are the LEDs below the Ethernet and SFP ports:
Ethernet
port LED
Green/Yellow Green when TP link is on 1000Mbps
Yellow when TP link is on 10/100Mbpx
SFP speed Green/Yellow Green when SFP link is on 1Gbps
Yellow when SFP link is on 100Mbps
RESET & RESTORE
Reset the switch 2 ~ 7 seconds Blinking Green All LEDs off
Restore to defaults 7 ~ 12 seconds Blinking Green All LEDs ON