AETEK H30-042-30 User manual

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use ber optic cables nd transceiver compliant with the following: Multi-mode: 50/125um, 62.5/25um, 850nm;
Single-mode : 9/125um ,1310nm.
4. DC input. Follow the printed polarity for V+, V-, and Ground.
1. Pull out the 2-pin terminal block.
2. Connect power wires to V+ and V-, Use a atlade screwdriver to secure the wire-clamp screws.
3. Connect SFP ransceiver to the ber port.
4. install the 2-pin terminal block, and check power LED.
5. The switch must be grounded properly by using a ground wire to connect switch ground screw to earth ground,
otherwise, the surge protection level will be greatly reduced.
IMPORTANT:
* 1x PoE switch * 1x Quick Installation Guide * 2x 2pin terminal block
* 1x DIN rail bracket
PACKAGE CONTENTS
Quick Installation Guide
Industrial GbE PoE Switch
P/N: A625012700G
Model Description
H30-042-30 4xGbE 30W PoE + 1xGbE RJ45 + 1xGbE SFP
H30-044-30 4xGbE 30W PoE + 2xGbE RJ45 + 2xGbE SFP
H30-044-90 4xGbE 95W PoH PoE + 2xGbE RJ45 + 2xGbE
SFP
H30-044-91 4xGbE 90W bt PoE + 2xGbE RJ45 + 2xGbE
SFP
H30-082-30 8xGbE 30W PoE + 2xGbE SFP
Model Description
H32-042-30 4xGbE 30W PoE + 1xGbE (24VDC/56VDC) PoE
+ 1xGbE SFP
H36-042-30 4xGbE 30W PoE + 1xGbE RJ45 + 1xGbE SFP
H36-044-90 4xGbE 95W PoH PoE +2xGbE RJ45 + 2xGbE
SFP
H36-044-91 4xGbE 90W bt PoE +2xGbE RJ45 + 2xGbE SFP
H36-082-30 8xGbE 30W PoE + 2xGbE SFP
CONNECTION
LED Color State Description
Power Amber ON The switch is powered on correctly.
Off Not receiving power from power 1 or power 2.
PoE Link Amber ON PD is detected on the designated port.
Off No PD is detected.
Data Link Green
ON Tx link is detected.
Off Link is not detected.
Flashing Data is being transmitted or received.
SFP Link Green
ON Fiber link is detected.
Off Fiber link is not detected.
Flashing Data is being transmitted or received.
LED Color State Description
Power Amber ON The switch is powered on correctly.
Off Not receiving power from power 1 or power 2.
24VDC
56VDC
Green
Amber
ON The No.5 port output is 24VDC PoE
ON The No.5 port output is 56VDC PoE
Off The No.5 port is no PoE ouput
PoE Link Amber ON PD is detected on the designated port.
Off No PD is detected.
Data Link Green
ON Tx link is detected.
Off Link is not detected.
Flashing Data is being transmitted or received.
SFP Link Green
ON Fiber link is detected.
Off Fiber link is not detected.
Flashing Data is being transmitted or received.
H30 / H36 Series
H32-042-30
Power LEDs
All Specications are subject to change without noice.
RESET
Reset the switch 3 seconds Blinking Green All LEDs o󰀨

AETEK INC.
3F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T:[phone]|W: www.aetektec.com|E:[email protected]
All specications are subject to change without noice.
Copyright © 2021 AETEK INC. All rights reserved.
H30-044-30 / H30-044-90 / H30-044-91
GbE PoE
RJ45 ports
Ground screw
Power input 1
Power input 2
PoE link LED
Data link LED
Data link LED
GbE RJ45 ports
GbE SFP ports
Power status LED
SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
H30-082-30
H36-082-30
H32-042-30
H30-042-30
GbE PoE
RJ45 ports
Ground screw
Power input 1
Power input 2
PoE link LED
Data link LED
GbE SFP ports
Power status LED
SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
GbE PoE
RJ45 ports
Ground screw
Power input 1
Power input 2
PoE link LED
Data link LED
GbE SFP ports
Power status LED
SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
Ground screw
* Make sure the grouning
resistance is lower than
0.5Ω.
GbE PoE
RJ45 ports
Ground screw
Power input 1
Power input 2
PoE link LED
Data link LED
GbE SFP ports
Power status LED SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
56VDC
24VDC
OFF
Adjustable Output PoE
GbE Adjustable
PoE RJ45 port
GbE PoE
RJ45 ports
Ground screw
Power input 1
Power input 2
PoE link LED
Data link LED
GbE SFP ports
Power status LED SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
GbE RJ45 port
GbE PoE
RJ45 ports
Power input 1
Power input 2
PoE link LED
Data link LED
GbE SFP ports
Power status LED SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
GbE
Data RJ45 port
Ground screw
H36-042-30
GbE 60w/95w PoE
RJ45 ports
Ground screw
Power input 1
Power input 2
PoE link LED
Data link LED
Data link LED
GbE RJ45 ports
GbE SFP ports
Power status LED
SFP link LED
Reset button
Power input 1
Power input 2
DIN rail
H36-044-90 / H36-044-91
DC Input: 48~56VDC
DC Input: 48~56VDCDC Input: 48~56VDC
DC Input: 48~56VDC
DC Input: 12~56VDC
DC Input: 12~56VDC
DC Input: 12~56VDC
IMPORTANT: