Agora Models FERRARI 312 T4 User manual

STAG ES 93-10 2
PACK
1111
THE LEGENDARY 1970sF1 FERRARI
SCALE
1:8
FERRARI

SCALE
1:8
Contents
STAGE 93
RIGHT BELLY SKIRT AND
BULKHEAD............................................................ 1
STAGE 94
LEFT SIDE BODYWORK INNER
COVERING ............................................................ 5
STAGE 95
RIGHT SIDE BODYWORK INNER
COVERING ............................................................ 9
STAGE 96
RIGHT WING MIRROR..................................13
STAGE 97
LEFT WING MIRROR .................................... 17
STAGE 98
COCKPIT WINDSCREEN ............................21
STAGE 99
SIDE RADIATOR MESH SECTIONS .....25
STAGE 100
BODYWORK, HOOKS, AND
DECALS................................................................ 29
STAGE 101
FIRST RAIN TYRE ............................................33
STAGE 102
SECOND RAIN TYRE.....................................37
FERRARI
Produced under license of Ferrari S.p.A.
The name FERRARI, the PRANCING HORSE
device, all associated logos and distinctive
designs are property of FERRARI S.p.A.
The body designs of the Ferrari cars are
protected as Ferrari S.p.A. property under
design, trademark and trade dress regulations.
© Agora Models
WARNING: NOT SUITABLE
FOR CHILDREN UNDER THE
AGE OF 14. THIS PRODUCT IS
NOT A TOY AND IS NOT
DESIGNED OR INTENDED
FOR USE IN PLAY.
ITEMS MAY VARY FROM
THOSE SHOWN.

1
FERRARI 312 t4 Pack 11 . sTAGe 93
312 T4
RIGHT BELLY
SKIRT AND
BULKHEAD
P A C K 11
STAG e
93
THIS STAGE PROVIDES THE PARTS TO COMPLETE AND CLOSE THE RIGHT
BELLY. ASSEMBLY OF THESE PARTS WILL BE SIMILAR TO THE LEFT SIDE
OF THE MODEL.
1
2
LIST OF PARTSLIST OF PARTS
1Right skirt
2Right bulkhead
Screws
Three type P screws
3type P screws

2
FERRARI 312 t4 Pack 11 . STAGe 93
FASTENING POINTS FOR THE SKIRT
AND RIGHT BELLY BULKHEAD
ADVANCED TECHNIQUE
The images show the points for joining and fixing the skirt (A, B, C)
and the bulkhead (D, E, F, G) to the right belly.
1
2
3
93-01 Take
the model
and the right
side skirt.
The arrows
highlight the
holes (A, B)
where the
fastening
screws will be
inserted.
C
C
G
G
F
F
E
E
D
D
A
A
B
base
B
01
base
base

3
FERRARI 312 t4 Pack 11 . STAGe 93
93-02
Position the skirt so that the
fastening holes match with
the screw seats.
93-03 Insert and tighten a type P screw in the
first hole (A) in the front.
93-04 Insert and tighten a type P screw into
the second hole (B).
93-05
Now take
the bulkhead
and align it
with the
right side.
05
03 04
02

4
FERRARI 312 t4 Pack 11 . STAGe 93
Final result
The right side of your model now
looks like this.
93-06 Slot it in so that the four
fastening points (D, E, F, G,
shown on page 2) all match.
Press down gently until the
covering snaps into place.
06
In the next stageIn the next stage
Left inner covering.

5
FERRARI 312 t4 Pack 11 . Stage 94
312 T4
STAG e
P A C K 11
94
LEFT SIDE
BODYWORK
INNER COVERING
IN THIS STAGE YOU WILL PREPARE AND ARRANGE THE CABLES AND LINES
ON THE RIGHT SIDE OF THE COCKPIT SO THEY ARE TIDIED AWAY, AND
USE TAPE TO KEEP THE SEATBELTS ON THE SEAT. THIS IS TO SIMULATE THE
WEIGHT OF THE BUCKLES HOLDING THE BELTS DOWN.
THE EXTRA MATERIALS YOU WILL NEED FOR THIS  TWOSIDED TAPE AND
SILVER TAPE  CAN BE FOUND IN ANY DIY STORE.
1
LIST OF PARTSLIST OF PARTS
1Left inner covering
Screws
Three type H screws
3type H screws

6
FERRARI 312 t4 Pack 11 . stage 94
94-01 Place the model on your
work surface. Note the seatbelts,
which are slightly raised against
the surface of the seat.
94-03 Remove the protective
film and, with tweezers, lift
one of the two seatbelts and
place the two-sided tape on
the bottom side, just under
the buckle.
94-04 Press gently onto the belt to make sure
that it adheres to the seat, and then repeat this
step for the other seatbelt.
94-05
Now take the silver tape. Cut a strip and secure
it to the work surface with adhesive tape. Use a
ruler and a sharp cutter and make vertical cuts
to obtain strips 3 mm wide and approx. 12 mm
long as shown.
94-02 Take a strip of two-sided tape and apply
it to the work surface. Cut two strips 4–5 mm
wide and approx. 12–13 mm long.
05
03
02
01
04

7
FERRARI 312 t4 Pack 11 . stage 94
94-06
Use tweezers to remove
the black line from the right
dashboard indicator.
94-07 After laying out the
line, starting from the gearbox,
fix a strip of silver tape to the
top part of the tank, then
around the line and on the
upright part, cockpit side. Use
the inset image to help you
understand the passage of
the line, especially around the
securing plate. Place a second
strip of silver tape around 3 cm
away from the first.
94-08 Now cut a strip, 12 mm long and 10 mm
wide and fix it over the radiator line, as well as
just before the radiator tie-rod.
94-09
Now
reposition
the black
line on the
dashboard
indicator
fitting,
indicated by
an arrow.
06
09
07
08

8
FERRARI 312 t4 Pack 11 . stage 94
Final result
This is what your model will
look like with the cables tidied
away neatly.
94-10 Cut a strip of two-sided tape 2 mm
wide and 5 mm long. Place the two-
sided tape in the recess above the third
air funnel trumpet.
94-11 Now place the cable
joint onto the two-sided tape
and press it down. This will
keep the line in the correct
position.
10
11
In the next stageIn the next stage
The right inside cover panel for the cockpit.

9
FERRARI 312 t4 Pack 11 . STAGe 95
312 T4
P A C K 11
STAG e
95
RIGHT SIDE
BODYWORK INNER
COVERING
NOW YOU’LL PREPARE AND ARRANGE THE CABLES AND LINES ON THE
LEFT SIDE OF THE COCKPIT SO THEY ARE TIDIED AWAY. YOU WILL ALSO
REARRANGE SOME SHORT SECTIONS OF THE LINES, TO MAKE YOUR
1:8 SCALE FERRARI 312 T4 EVEN MORE REALISTIC.
1
LIST OF PARTSLIST OF PARTS
1Right inner covering
Screws
Three type H screws
3type H screws

10
FERRARI 312 t4 Pack 11 . STAGe 95
95-01 Place the model on your work surface.
Use tweezers to remove the clear tube from
the dashboard indicator.
95-03 Gently pull both clear
tubes so that they are both in
line, without making any loops
around the cockpit, as shown.
95-04 Take a strip of silver adhesive tape
and, with a sharp cutter, cut it into several
strips, approx. 5 mm wide and 15–18 mm long.
Keeping the tubes as shown, fix a first strip of
silver tape to hold them in place.
95-05 Keep the cables taut, fix them with a
second strip of silver tape.
95-02 Slide it from under the transparent tube
of the radiator (circled). Connect the tube back
to the dashboard using a pair of tweezers.
05
03
02
01
04

11
FERRARI 312 t4 Pack 11 . STAGe 95
95-06 Disconnect the two
clear tubes from the oil filter
couplings, pass them under
the roll-bar tie-rods and under
the cables of the distributor
wires. Cut a 13 mm long
section from the tube,
then a second, longer
33–35 mm section.
Now reconnect the
tubes to the same
connections you
disconnected
them from.
95-07 Cut
one end of
the short
tube cut in
the previous
step so that it
is bevelled to
about 45°.
Fit the short
tube over the
tank breather
filter, as in the
image.
95-09 Pass the free end of
the tube to the left (in the
direction of travel) of the
headrest.
95-08
Connect the
longer tube
cutting to the
fitting on the
canister of
compressed
air inside the
roll-bar. 08
06
09
07

12
FERRARI 312 t4 Pack 11 . STAGe 95
Final result
The cables have been tidied
and connected correctly on
your model.
95-10 Cut a strip of two-sided adhesive
tape, 2 mm wide and 10–12 mm long. Use
tweezers to place the double-sided tape
over the recess above the third air horn.
95-11 Now place the cable
joint over the two-sided tape
and press. This will hold the
cable in the correct position.
11
10
In the next stageIn the next stage
Right wing mirror parts.

13
FERRARI 312 t4 Pack 11 . STAGe 96
312 T4
STage
P A C K 11
96
RIGHT WING
MIRROR
NOW YOU’LL ASSEMBLE THE RIGHT WING MIRROR, WHICH YOU
WILL BE ABLE TO FIT TO YOUR NEARLY COMPLETE MODEL AT
A LATER STAGE.
1 2
3
LIST OF PARTSLIST OF PARTS
1Cowling
2Support
3Mirror

14
FERRARI 312 t4 Pack 11 . STAGe 96
96-02
On one side, the mirror
has a reflective surface, while
on the other, there is a layer of
two-sided tape.
96-01
Set out the parts of the wing
mirror on your work surface:
(left to right) mirror, support,
and cowling.
96-03
The shaped form of the
cowling matches the shape of
the mirror. 03
02
01

15
FERRARI 312 t4 Pack 11 . STAGe 96
96-06
Position the mirror inside the
cowling. The two-sided tape
will hold the mirror securely.
You can remove the clear film
protecting the surface of the
mirror now, or wait until the
model is finished.
96-04 You can try placing
the mirror into the cowling
without the two-sided tape in
order to test the fitting.
04
06
96-05
Lift the film
from the
double-sided
tape and
remove it
with the help
of tweezers.
05

16
FERRARI 312 t4 Pack 11 . STAGe 96
Final result
You have finished building
the right wing mirror. Carefully
set it to one side.
96-07 Take the support and
fix it to the cowling, using its
pin as shown.
07
In the next stageIn the next stage
Parts of the left wing mirror.

17
FERRARI 312 t4 Pack 11 . stage 97
312 T4
STAG e
P A C K 11
97
LEFT WING
MIRROR
NEXT YOU’LL BUILD THE LEFT WING MIRROR, IN THE SAME WAY
AS THE RIGHT ONE FROM THE PREVIOUS STAGE.
1
2
3
LIST OF PARTSLIST OF PARTS
1Cowling
2Support
3Mirror

18
FERRARI 312 t4 Pack 11 . STAGe 97
97-02
As before, the mirror has a
reflective surface, while on
the other side there is a layer
of two-sided tape. The cowling
is shaped to accomodate
the mirror.
97-01
Set out the parts of the wing
mirror on your work surface:
(left to right) cowling, support,
and mirror.
97-03 Lift the film from the
double-sided tape and with
the help of tweezers. 03
02
01