Agora Models FERRARI 312 T4 User manual

STAG ES 25-33
PACK
0404
THE LEGENDARY 1970sF1 FERRARI
SCALE
1:8
FERRARI

SCALE
1:8
FERRARI
Contents
STAGE 25
SEAT BELTS AND COCKPIT BACK PLATE ...... 1
STAGE 26
ROLL BAR AND REINFORCEMENT PLATES ...... 5
STAGE 27
HEADREST, FIRE EXTINGUISHER CONTROL,
AND BATTERY KILL SWITCH ................................. 9
STAGE 28
EXTINGUISHER, PRESSURE GAUGE,
AND EXTINGUISHER VALVE CONTROL ...............13
STAGE 29
TANK VENT VALVE AND REINFORCEMENT
BRACKETS .............................................................. 17
STAGE 30
DASHBOARD FRAME, CABLES, THE SHEATH,
AND PUSHBUTTON PANEL ....................................21
STAGE 31
DASHBOARD, DIALS, AND CABLES ..............25
STAGE 32
STEERING WHEEL, SWITCH, AND STEERING
WHEEL CENTRE WITH EMBLEM ................... 29
STAGE 33
STEERING SHAFT..................................................33
Produced under license of Ferrari S.p.A.
The name FERRARI, the PRANCING HORSE
device, all associated logos and distinctive
designs are property of FERRARI S.p.A.
The body designs of the Ferrari cars are
protected as Ferrari S.p.A. property under
design, trademark and trade dress regulations.
© Agora Models
WARNING: NOT SUITABLE
FOR CHILDREN UNDER THE
AGE OF 14. THIS PRODUCT IS
NOT A TOY AND IS NOT
DESIGNED OR INTENDED
FOR USE IN PLAY.
ITEMS MAY VARY FROM
THOSE SHOWN.

1
FERRARI 312 t4 Pack 04 . STAGE 25
312 T4
STAG E
PACK 04
LIST OF PARTSLIST OF PARTS
1Central belt
2Sponsor stickers
3Cockpit back plate
4Left and right belts
5Belt release
(top and bottom)
Screws
Five type J screws
SEAT BELTS
AND COCKPIT
BACK PL ATE
YOU WILL NOW CONTINUE
TO ASSEMBLE THE COCKPIT
OF YOUR 1:8 SCALE RACING
CAR, ATTACHING
THE LEFT AND RIGHT
SEAT BELTS.
25
1
2 3
4
5
5type J screws

2
FERRARI 312 t4 Pack 04 . STAGE 25
25-03 Using your tweezers,
apply the stickers to your belts.
25-01 Using the designated interlocks, fix the left
seat belt to the back plate.
25-02 In the same way, also fix
the right seat belt to the back
plate.
Be careful with the orientation
of the belts, which must look
as shown in the images.
01
02
03

3
FERRARI 312 t4 Pack 04 . STAGE 25
06
25-06
To complete this assembly,
tighten two type J screws in
the positions shown in the
photograph.
25-04 Take the cockpit cradle. The image
highlights the anchor points for the plate.
25-05 Put together both of
these components by fitting
the openings on the plate on
to the columns on the cradle
(circled in the photograph)
and inserting the end of the
plate into the cradle (arrow).
05
04

4
FERRARI 312 t4 Pack 04 . STAGE 25
Final result
The cockpit cradle has been
fitted with the back plate and
the seat belts have been fixed
in place.
In the next stageIn the next stage
Roll bar and reinforcement
plates.

5
FERRARI 312 t4 Pack 04 . STAGe 26
312 T4
Stage
PACK 04
LIST OF PARTSLIST OF PARTS
1Right-hand plate
2Roll bar
3Left-hand plate
Screws
Five type G screws
ROLL BAR AND
REINFORCEMENT
PL ATES
STAGE 26 PROVIDES YOU WITH THE ROLL BAR AND ITS SIDE PLATES THAT
FORM PART OF THE COCKPIT COMPARTMENT. IN THIS ASSEMBLY SESSION
YOU WILL BE FITTING THESE NEW PARTS TO YOUR MODEL.
26
1
2
3
5type G screws

6
FERRARI 312 t4 Pack 04 . STAGe 26
26-01 Lay the roll bar and the right-hand plate
on your worktop. The image highlights the pins
on the plate and the corresponding holes in the
roll bar structure.
26-02 Using the connections just identified,
fit these two components together. If the
coupling between the pins and holes is too
loose, you can use a drop of plastic glue.
26-03 Take the left-hand plate,
which has a round hole and
two adhesive stickers. Identify
the four mounting pins and
their holes (arrows and circles).
Install the left-hand side plate
on the roll bar structure. Again,
if necessary, you can use a
drop of plastic glue.
01
02
03

7
FERRARI 312 t4 Pack 04 . STAGe 26
26-05 Mount the roll bar on
the cockpit cradle, using the
four interlocks identified in the
previous item.
05
04
26-04
Retrieve
the cockpit
cradle. The
illustration
highlights
the four holes
that take the
pins on the
bottom of
the roll bar
structure.

8
FERRARI 312 t4 Pack 04 . STAGe 26
Final result
The cockpit cradle of your 1:8 scale Ferrari 312 T4
now has its roll bar.
In the next stageIn the next stage
The headrest, the fire extinguisher control,
and the battery kill switch.
26-06 Turn over the cockpit
cradle and attach the roll bar
structure using four type G
screws (circled).
06

9
FERRARI 312 t4 Pack 04 . STAGe 27
312 T4
STAG e
PACK 04
LIST OF PARTSLIST OF PARTS
1Headrest
2Switch
3Switch base
HEADREST,
FIRE EXTINGUISHER
CONTROL, AND
BATTERY KILL SWITCH
THESE PARTS WILL BE USED TO ENHANCE THE INTERIOR OF
YOUR MODEL WITH ADDITIONAL DETAILS.
27
1
2
3

10
FERRARI 312 t4 Pack 04 . STAGe 27
27-01 Look carefully at the switch base. There is a small half-round hole at
the centre of the cone. Insert the switch into the base and press these two parts
together using the half-round hole.
27-02 Retrieve the cockpit cradle. The opening on the left-hand plate into which
the switch base should be fitted is circled in the image.
01
02

11
FERRARI 312 t4 Pack 04 . STAGe 27
27-03 Fit the switch base into
the left-hand plate, as shown
in the images.
04 27-04
Finally mount the headrest,
which has two holes on the
back that must fit on to the
pins on the roll bar.
03

12
FERRARI 312 t4 Pack 04 . STAGe 27
Final result
More details have been fitted to
the cockpit of your 1:8 scale
Ferrari 312 T4.
In the next stageIn the next stage
The extinguisher with the pressure gauge
and the extinguisher valve.

13
FERRARI 312 t4 Pack 04 . stage 28
312 T4
Stage
PACK 04
LIST OF PARTSLIST OF PARTS
1Fire extinguisher body
2Valve base and pressure
gauge
3Pressure gauge glass
4Pressure gauge dial
5Extinguisher valve
control
EXTINGUISHER,
PRESSURE GAUGE,
AND EXTINGUISHER
VALVE CONTROL
THESE PARTS ARE USED TO BUILD THE FIRE EXTINGUISHER
ASSEMBLY, WHICH WILL BE POSITIONED BEHIND THE ROLL
BAR ON YOUR MODEL.
28
1
2
345

14
FERRARI 312 t4 Pack 04 . stage 28
28-01 Take the pressure gauge glass, the dial, and the
base. Fit the pressure gauge dial into the pressure gauge
base. The semi-circular connections will ensure that these are
fitted correctly.
28-02 Now position the
pressure gauge glass over
th dial and press with your
fingers to insert it into the
front of the dial.
28-03 Retrieve the valve
control and fit the thicker pin
into the hole on the side of the
base as shown.
01
03
02

15
FERRARI 312 t4 Pack 04 . stage 28
06
28-04 Then join the base of
the valve and the pressure
gauge to the body of the
fire extinguisher, using its
designated mounting pin.
05
28-05 Retrieve the cockpit cradle and place it
on your work surface.
28-06 Using the rectangular connections
shown, attach the fire extinguisher to the
cockpit cradle.
04

16
FERRARI 312 t4 Pack 04 . stage 28
Final result
Having now completed the assembly
procedures as described, you have put
together the fire extinguisher and mounted
it on the cockpit cradle of your 1:8 scale model.
In the next stageIn the next stage
The cockpit cradle reinforcement
brackets and the tank
breather system.

17
FERRARI 312 t4 Pack 04 . STAGe 29
312 T4
STAG e
PACK 04
LIST OF PARTSLIST OF PARTS
1Right-hand bracket
2Left-hand bracket
3Cable
4Valve connector
5Valve
TANK VENT
VALVE AND
REINFORCEMENT
BRACKETS
THE COCKPIT REINFORCEMENT BRACKETS AND THE COMPONENTS OF
THE TANK VENT VALVE ARE SUPPLIED WITH THIS STAGE.
29
12
3
45

18
FERRARI 312 t4 Pack 04 . STAGe 29
29-01 Retrieve the cockpit cradle and attach the right-hand bracket. Be careful:
The end of the bolt on the bracket must face inwards (arrows).
29-02 In the same way, attach
the left-hand bracket to the
cradle. The ends of the two
bolts should be facing each
other (arrows).
29-03 Usingtweezers, fit one end of the cable
to the pin on the valve connector.
01
0403
29-04 The valve fits into the
other end of the cable.
02