aidapt VA126SB Programming manual

Gel Comfort Cushion
VA126SB
Usage and Maintenance Instructions
This le is available to view and download as a PDF at
www.aidapt.co.uk. Sight impaired customers can use a free
PDF Reader (such as adobe.com/reader) to zoom in and
increase the text size for improved readability.

November 2021 2
INTRODUCTION
Thank you for deciding to purchase the Gel Comfort Cushion from Aidapt. When used correctly it is designed to
give many years of reliable, trouble-free service.
BEFORE USE
• Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may damage the item.
• Check the product for any visible damage If you see any damage or suspect a fault, do not use your product,
but contact your supplier for support.
INTENDED USE
• The Gel Comfort Cushion can provide extra support and comfort in cars and homes.
• Ensure that the Gel Comfort Cushion is pushed back to the rear of the seat before use.
• Avoid sharp objects such as zips and keys coming into contact with the cushion as this may damage the cover or
foam lling.
• Not recommended for use outdoors.
GEL POUCH SAFETY INFORMATION
The cushion includes a gel pouch and the following rst aid measures apply;
• In case of inhalation access fresh air and consult a doctor if symptoms persist.
• In case of contact with skin wash hands and aected area immediately with soap and water.
• In case of contact with eyes rinse aected eye for several minutes under running water.
If symptoms persist consult a doctor.
• In case of swallowing rinse mouth with water immediately. If symptoms persist consult a doctor.
For further deatils see web site www.aidapt.com for full material safety data sheet.
CLEANING
Clean your Gel Comfort Cushion using a mild detergent with a slightly damp, soft cloth only. Only use a mild
detergent or disinfectant; never use an abrasive cleaner. Do not soak the cushion lling. The removable cover can
be washed on a gentle cycle in a washing machine. After cleaning, leave the cushion to air/dry in a warm, dry
place, but not in direct contact with a heat source.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for service support.
IMPORTANT INFORMATION
Please exercise common sense and do not take any unnecessary risks when using this product; as the user you
must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer (detailed below)
if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: [phone] • Fax: [phone] • Web: www.aidapt.co.uk
Email: [email protected] • [email protected] • [email protected]