AirLive WH-9200AP User manual

D
ual Radio Dual Band 108 Mbps Outdoor AP
W
H
-9200
A
P

WH-9200AP
En
g
lish
Česky
Deutsch
Español
Ελληνικός
Français
...............
.................
..............
..............
...........
.............
Italiano
Magyar
Polski
Português
Русский
Slovensky
...............
...............
.............
.........
.............
...........
1
15
28
41
54
67
119
93
106
Table of Contents
List of Languages
80
132
145

1
WH-9200AP English
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan
Declare that the product
Dual Radio Dual Band 108 Mbps Outdoor AP
AirLive WH-9200AP
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause Description
EN 301 893 v1.4.1 (2005-03) Broadband Radio Access Network(BRAN); 5GHz high performance RLAN; Harmonized EN Covering essential
requirements of Article 3.2 of the R&TTE Directive.
EN 300 328 v1.7.1(2006-10) Electromagnetic compatibility and Radio spectrum matters (ERM); Wideband transmission equipment operating in the
2.4GHz ISM band and using spread spectrum modulation techniques; Part 1: technical Characteristics and test
conditions Part2：Harmonized EN covering Essential requirements under article 3.2 of the R&TTE Directive
EN 301 489-1 v1.6.1 (2005-09)
EN 301 489-17 V1.2.1 (2002-08) Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17：Specific conditions for wideband data and HIPERLAN equipment
EN 50385:2002 Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless
Telecommunication System with the Basic restrictions or the reference levels related to human exposure to radio
Frequency electromagnetic fields ( 110 MHz –40 GHz ) - General public
EN 60950-1:2001/A11:2004 Safety for information technology equipment including electrical business equipment
■CE marking
Manufacturer/Importer
Signature：
Name ： Albert Yeh
Position/ Title : Vice President
Date： 2008/10/17
English

2 WH-9200AP English
Note on the FCC standard
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences
when the equipment is operating in a commercial area. This equipment generates uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause interference in the
transmission of radio communications. If operating in a residential area, it is probable this equipment will cause
harmful interference, in which case the user will be required to try to correct this interference using his own
means.
Note on CE Marking
This is a Class B product. In a residential area this product may cause radio interference, in which case the user
can be required to take the appropriate measures. OvisLink Corp. hereby declares that AirLive WH-9200AP
meets the basic requisites of directive 99/05/CE, and is therefore liable for the accuracy of these data:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: [phone]
Warranties
This product has undergone various quality controls to ensure proper operation.
This product is covered by a two-year warranty for countries inside European Union. For other countries, the
warranty period is one year only. In the event of any manufacturing fault or breakdown, it will be repaired by
OvisLink Corp. Please contact your supplier for details on the procedure to follow. This warranty shall not be
applicable in the event of damage caused by improper use of the product, accidents, faulty handling or
manipulation nor any future incompatibility with third party products.
English

3
WH-9200AP English
English
Hardware Installation

4 WH-9200AP English
Plug Ethernet cable to the PoE
“P + DATA OUT” jack of the
injector
Plug the power cord of adaptor into
the injector “POWER IN” port.
Plug the LAN Ethernet
cable to the port “DATA
IN” of the injector.
English

5
WH-9200AP English
Display Color Description
WLAN 1 Blue
WLAN 2 Green
No Connection: Off
Low Signal: Flash per second
Better Signal: Flash every 2 seconds
Best Signal: Steady On
English

6 WH-9200AP English
Install Antenna
The WH-9200AP has two Radios, both with N-Type
Female Connector for outdoor antenna. Radio 1 is
802.11a only and Radio 2 is 802.11a/b/g. You can
configure in the web interface and select suitable
antennas for your application.
Antenna 2 Antenna 1
English

7
WH-9200AP English
Important Information
zThe AP mode’s default IP address is 192.168.1.1
zThe default Subnet Mask is 255.255.255.0
zThe default is set to Dual AP mode.
zThe default password is airlive
zThe default SSID is AirLive1 with channel “Auto” on WLAN1, AirLive2 with channel “Auto” on WLAN2
zThe default DHCP client is Disabled
Configuration Steps
z
z Please install your network cards first before the AP
z
z Screw-in antennas (clockwise) into the Antenna connector
z
z Connect the power and LAN cable to the back
z
z Use your wireless card to do a site survey, default SSIDs are “AirLive1” and “AirLive2” with channel
“Auto” for both wireless interfaces.
z
z If you need to change AP’s configuration, please follow the procedure below:
The AP mode’s default IP address is 192.168.1.1. Please make sure your computer IP is in
the same subnet as the AP (i.e. 192.168.1.x)
Open the web browser and enter 192.168.1.1.
Enter the Password airlive.
English

8 WH-9200AP English
Wireless Settings
There are 14 Operation Modes in the Wireless Settings.
z
z To change operational mode,
please go to Setup Wizard and
click on “Operational Mode”,
select desired operation mode
and click on “Change Mode” to
validate.
z
z After reboot, the device changes
its operation mode as selected
configuration, the parameter
display changes according to
Operational Mode.
z
z Each wireless interface of any
operational mode can be
configured separately. In following
sections, each mode is presented
under a single interface, which is
applicable for all operational
modes.
English