Akuvox E21V User manual

E21A/E21V
Quick Guide
Unpacking
Please make sure the package contains the following items:
E21A/V x 1 Screw x 4 Screwdriver x 1 Back cover x 1（Optional）
Product Overview
E21V
E21A

E21A/E21V
Installation
Back cover installation
Regarding the size of back cover, use the cement to fix the back cover in the wall, make sure the path for
power and Ethernet has been reserved.

E21A/E21V
Connect to the power and Internet
Fix the panel with screws
Note: If Power over Ethernet
is being used, do not plug in
another power supply.

E21A/E21V
Configuration
1. Access the Web UI: Input the IP address into browser to configure the phone. The default IP address is
192.168.1.100.
2. Account Registration: On web UI, go to the path: Account -> Basic to register an account and fill in the
account information. (Please refer to user manual for more information)
3. Configure the Push Button: On web UI, go to the path: Intercom -> Basic -> Push Button to configure the
call number.
4. Configure the DTMF code: On web UI, go to the path: Intercom -> Relay&Input -> Relay and choose the
DTMF code number in corresponding area.
IP Announcement
1. While E21 startup normally, hold the call button for several seconds after LED light turns blue, voice
system will enter IP announcement mode.
2. In announcement mode, the IP address will be announced periodically.
3. Press Call Button again to exit the announcement mode.
4. In announcement mode, phone announces "IP 0.0.0.0" if no IP address is gained.
Operation
Make a call:
1. Press the call button to call indoor SIP Phone, video call is only for E21V.
2. During the talk, called party can press predefine DTMF code number to open the door.
Receive a call:
E21 supports Auto Answer by default. Incoming call from indoor device will be answered automatically.

E21A/E21V
LED Status Information
LED Status
Description
Blue
Always on
Normal status
Flashing
Calling
Red
Flashing
Network is unavailable
Green
Always on
Talking on a call
Flashing
Receiving a call
Pink
Flashing
Firmware upgrading
Note: For more LED settings, please refer to E21 web interface.
Notice Information
Information contained in this document is believed to be accurate and reliable at the time of
printing. This document is subject to change without notice, any update to this document can be
viewed on Akuvox’ s website: http://www.akuvox.com © Copyright 2016 Akuvox Ltd. All rights
reserved.