Akuvox R23C User manual

R23X Door Phone User Manual
R23C
R23P

About This Manual
Thank you for choosing Akuvox’s R23X door phone. This manual is intended for end users, who need to properly configure the door
phone. It provides an overview of the most essential functions and features of the product, the information detailed in this user
manual applicable to firmware version 26.0.2.57 rom or lower version.
Contact us
For more information about the product, please visit us atwww.akuvox.com or feel free to contact us by
Sales email: [e-mail]
Technical support email: [e-mail]
Telephone: [phone] ext.7694/8162
We highly appreciate your feedback about our products.

Content
1. Product Overview...........................................................................................................................................................................1
1.1. Instruction ...............................................................................................................................................................................1
1.2. Connector Introduction............................................................................................................................................................2
2. Daily Use .........................................................................................................................................................................................3
2.1. Making a Call ..........................................................................................................................................................................3
2.2. Receive a Call.........................................................................................................................................................................3
2.3. Unlock by RF Card (R23C only)..............................................................................................................................................3
3. Configuration..................................................................................................................................................................................4
3.1. Web Login ...............................................................................................................................................................................4
3.1.1. Obtaining IP Address .....................................................................................................................................................4
3.1.2. Access the device website .............................................................................................................................................4
3.2. Basic Setting ...........................................................................................................................................................................5
3.2.1. Time/Lang ......................................................................................................................................................................5
3.2.2. Voice..............................................................................................................................................................................5

3.3. IP Address Setting...................................................................................................................................................................6
3.3.1. DHCP.............................................................................................................................................................................6
3.3.2. Static IP..........................................................................................................................................................................7
3.4. Call Setting..............................................................................................................................................................................7
3.4.1. No Answer Call ..............................................................................................................................................................7
3.4.2. Push Button ...................................................................................................................................................................7
3.5. Card Setting( R23C only ) .......................................................................................................................................................8
3.5.1. Import/Export Card Data................................................................................................................................................8
3.5.2. Obtain and Add Card .....................................................................................................................................................8
3.5.3. Door card Management .................................................................................................................................................9

1
1. Product Overview
1.1. Instruction
Akuvox R23A is a SIP-compliant, hands-free one button video
outdoor phone. It can be connected with your Akuvox IP
Phone for remote unlock control and monitor. Users can
operate the indoor phone to communicate with visitors via
voice and video, and use RF card to unlock the door. It’s
applicable in villas, office and so on.
R23C
R23P

2
1.2. Connector Introduction
Connector
Ethernet(POE) Ethernet(POE) connector which can provide both
power and network connection.
12V/GND
External power supply terminal if POE is not
available.
RS485A/B
RS485 terminal for automation system
control(e.g. Elevator control).
DOOR1/2
Trigger signal input terminal(e.g. Press indoor
button to open relay).
RelayA/B NO/NC Relay control terminal.

3
2. Daily Use
2.1. Making a Call
Press the call button to call out the predefined number or IP address
and if LED turns green, it means the call has been answered.
2.2. Receive a Call
Users can use IP phone or indoor monitor to call R23X and it
will answer automatically by default. If user disable auto
answer, pressing button to answer incoming call.
2.3. Unlock by RF Card (R23C only)
Place the predefined RF card on the card sensor area. The
door phone will announce ‘the door is now opened’ and open
the door. 13.56MHz RF card is supported by R23C.
R23C R23P

4
3. Configuration
3.1. Web Login
3.1.1.Obtaining IP Address
The Akuvox R23X uses DHCP IP address by default. If IP
address is unknown, hold the call button for a short period of
time(about 5s) after LED light turns blue, R23X will announce
its IP continuously. Press once again to stop.
3.1.2.Access the device website
Open a web browser, access the corresponding IP address.
Then, enter the default user name and password to login.
The default administrator User Name and Password are
shown below:

5
User name: admin
Password: admin
3.2. Basic Setting
3.2.1.Time/Lang
Go to Phone->Time/Lang to select local Time Zone for NTP
server.
3.2.2.Voice
Go to Phone->Voice, to configure volume and upload tone file.
(1) Mic Volume: To configure Microphone volume.
(2) Speaker Volume: To configure Speaker volume.
(3) Open Door Warning: Disable it, you will not hear the prompt voice
when the door is opened.

6
(4) IP Announcement: To setup the IP Announcement active time. Over
the configured value, the phone will not announce its IP address, even
you hold the button.
(5) Ring Back Upload: To upload the ring back tone you need.
(6) Open door Tone Upload: To upload the Open door tone you need.
3.3. IP Address Setting
Go to Network->Basic, dynamically or statically to obtain IP address.
3.3.1.DHCP
R23X uses DHCP by default, it will get IP address, Subnet Mask, Default
Gateway and DNS server address from DHCP server automatically.

7
3.3.2.Static IP
If selected, you could manually set IP address, Subnet Mask, Default
Gateway and DNS server.
3.4. Call Setting
Go to Intercom->Basic, to configure basic call setting.
3.4.1.No Answer Call
Enable it, if there is no answer from push button number over 60s
(default value), R23X will call predefined 'No Answer Call' number.
3.4.2.Push Button
①Push Button: To configure the destination number or IP you want to
contact with. If you would like to call multiple numbers at same time,
divide them by semicolon.
②No Answer Call 1&2: To setup one or two no answer call number.

8
3.5. Card Setting( R23C only )
Go to Intercom -> Card setting, to manage card access system.
3.5.1.Import/Export Card Data
R23C supports import or export the card data file, which is convenient
for administrator to deal with a large number of cards.
3.5.2.Obtain and Add Card
①Switch card status to 'Card Issuing' and click 'Apply';
②Place card on the card reader area and click 'Obtain';
③Name card and choose which door you want to open;
④Click 'Add' to add it into list.

9
3.5.3.Door card Management
Valid card information will be shown in the list. Administrator
could delete one card’s access permission or empty all the list.