Alpine KCE-400BT User manual

Bluetooth INTERFACE
FOR CAR USE ONLY /NUR FOR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMOVILES/SOLO PER L'UTILlZlO IN AUTOMOBILE/ENDAST FOR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/TOllbKO
AI1R MCnOllb30BAHMR B ABTOM06MllRX/DO uiYCIA TYLKO W SAMOCHODZIE/fiA XPHIH MONO IE AVTOKINHTO/
J5\.wm h&t$~Jij
III
•
•
II
•
II
•
•
III
•
•
II
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sui Naviglio (MI), Italy
Phone [phone]
DAESUNG ELTEC CO., LID.
Phone [phone]
Web www.dseltec.co.kr
ALPINE ELECTRONICS DE ESPANA. SA
Portal de Gamarra 36, Pabell6n, 32
01013 Vitoria (Alava}-APDO 133, Spain
Phone [phone]
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone [phone]
•ffl J5 -=¥ fffi
~H~ffl~m~2M~~~fflJ5-=¥fffio
• mPi}l~-t1
1tmi5t~rrH1fI]Ji~*i}lflA-t1 0
• ErXEIPI~IO XPHITH
IIuQuxuAOUIJ£ bLu~am;E 1:0 :7tQLV XQTJOLflO:7tOLTJOE'tE 'tTJ
O'Uo'X,£lJl).
• INSTRUKCJA OBSLUGI
Prosimy zapoznac sicr z t<! instrukcj<! przed
przyst<!pieniem do uiytkowania urz<!dzenia.
• PYKKOBOOBO.o:CTBO ITO 3KCITJIY AT AIJ;1111
ITPO'l'lTHTenne HaCTOSl~ee PYKOBOKOBO~CTBO
nepe~ Ha'laJIOM HCnOJIh30BaHIDl o6opy~oBaHIDl.
• GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens dit
toestel te gebruiken.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LID.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone [phone]
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 MOnchen. Germany
Phone [phone]
ALPINE ELECTRONICS OF U.K. LID.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW,
UK
Phone [phone]
ALPINE ELECTRONICS FRANCE S.A.R.L
(RCS PONTOISE B 338101280)
98, Rue de la Belle Etoile, Z.I. Paris Nord 11,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone [phone]
ALPINE ELECTRONICS MARKETING, INC.
H-8 Nishi Gotanda.
Shinagawa-ku.
Tokyo 141-0031, Japan
Phone [phone]
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place. Torrance,
California 90501. U.S.A.
Phone 1-8oo-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertesl Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-8oo-257-4631)
KCE-400BT
o Bluetooth
4P
• ANVANDARHANDLEDNING
Innan du anvander utrustningen bOr du lasa
igenom denna anvandarhandledning.
• ISTRUZIONI PER L'USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACION
Ualo antes de utilizar este equipo.
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch
des Gerates.
SUZHOU CRESTEC PRINTING CO., LTO.China
596-598 Chang Jiang Road, Suzhou, Jiangsu, P.R.China Printed
in China (Y)
68-14470Z05-A

Contents
Operating Instructions
it WARNING
WARNING 2
CAUTION 2
Setup Before Using
About Bluetooth 3
Before Using Hands-Free Function 3
How to connect to aBluetooth compatible
device (Pairing) 3
Bluetooth SETUP
Bluetooth Setup Operation 4
Setting the Bluetooth Device 4
Setting the Search Mode 4
Answering Calls Automatically 4
Deleting aBluetooth Device from the list 5
Displaying the phone service provider name
(CDA-105 Series only) 5
Adjusting the volume for the microphone
input 5
Selecting the output speaker 5
Displaying the firmware version 5
Updating the firmware 5
Hands-Free Phone Control
About the Hands-Free Phone 6
Answering aCall 6
Hanging up the Telephone 6
Voice Dial Operation 6
Adjusting the volume when receiving aCall 7
Redial Function 7
ENGLISH
Audio Switching Operation (CD Head Unit
Only) 7
Call History 7
Redialing aNumber in Dialed Calls
History 8
Dialing aNumber
in Received Calls
History 8
Dialing aNumber in Missed Calls
History 8
Dialing aNumber
In the Phone Book
(PHONE BOOK) 8
Bluetooth Audio Function
Bluetooth Audio Operation 8
Recalling the Bluetooth Mode 8
Selecting the desired Song 8
Pausing 8
Accessories 9
Installation
Velcro fastener Mounting 9
Mounting the Microphone 9
Connections
Connect aBluetooth compatible unit and an
iPhone/iPod
to the Bluetooth
INTERFACE
10
Specifications 12
LIMITED WARRANTy WARRANTY·EN
•Setting items, operations, etc., may be modified or removed
without notice depending on the connectedAlpine
Bluetooth compatible unit.
I.EN
I

Operating Instructions
WARNING
Lt WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult aphysician immediately.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity
of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage
or obstruct pipes, fuel
lines, tanks
or electrical wiring. Failure to take such precautions
may result
in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system),
or tanks should NEVER be used for
installations
or ground connections. Using such parts could
disable control
of the vehicle and cause fire etc.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables
or wiring that obstruct
or hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
2.EN
Lt CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit
in place. This may cause parts to become
loose resulting
in hazards or product failure.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result
in product failure.
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience.
To ensure safety, always contact the dealer
where you purchased this product to have the work done.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails)
or sharp or pointed edges. This will prevent crimping
and damage to the wiring.
If wiring passes through ahole in
metal, use arubber grommet to prevent the wire's insulation from
being cut by the metal edge
of the hole.

Setup Before Using
AboUl Bluetooth
Bluetooth is awireless technology allowing communication
between amobile device
or personal computer over short
distances. This enables ahands-free call or data transmission
between Bluetooth compatible devices. Bluetooth
transmission is available
in the unlicensed 2.4 GHz spectrum
if the distance between devices is within 10 meters. For
details, refer to the Bluetooth Homepage
(http://www.bluetooth.com!).
•Depending on the Bluetooth version, aBluetooth
compatible device may not be able to communicate with
this adapter.
•Properfunction
of this adapter with all Bluetooth
compatible devices is not guaranteed.
For handling of the
BT compatible device, consult yourALPINEdealer or
ALPINE website.
•Depending on the surroundings, Bluetooth wireless
connection may be unstable.
•When you place acall,
or perform setup operations, be
sure to stop your car in asafe place.
•For details on the control (selection,
enter, cancel)from the
connected unit, refer
to the Owner's Manual of the
respective unit.
•Depending on the connected Bluetooth compatible
device(s), the function may differ. Also refer to the Owner's
Manual
of the connected device(s).
Before Using Hands-Free Function
Before using the hands-free phone/audio function, the
following settings need to be made.
1Be sure to set"INT MUTE" (in the setup
function of the connected CD Head Unit or
Digital Media Receiver) to OFF.
• To enable soundpass-through of the Bluetooth compatible
device, make sure that
INT MUTE is turned OFF (Initial
setting on the unit is OFF).
2Set "BLUETOOTH IN" or "BT IN" to
ADAPTER*.(Refer to the Owner's Manual of
the connected units.)
3Turn the ignition key off (ACC OFF) and on
again (ACC ON).
•Before using ahands-free phone, it must be paired with the
adapter. Refer to "Bluetooth SETUP" (pages 4-5).
* If "BLUETOOTH IN" or "BT IN" setting is turned OFFat
any time, adapter communication is canceled.
To resume
communication: repeat Steps Ithrough 3above.
How to connect to a Bluetooth
compatible device (Pairing)
For details on the control from aBluetooth compatible I
device, refer to the Owner's Manual of the Bluetooth
compatible device.
1Set aBluetooth connection from aBluetooth
compatible device.
2The PIN code ("0000") is displayed on the
connected unit.
•The PIN code isfixed as "0000".
3Input the PIN code ("0000") in aBluetooth
compatible device.
4If the connected unit is successfully
connected to aBluetooth compatible device,
apaired device name is displayed on the unit,
and then the unit returns to normal mode.
•The registration number 5is the guest mode. Content that
is registered as the guest mode is deleted when you set
ignitionfrom
Ace to OFF. If all the 5positions (including
guest mode) have been registered, you cannot register the
6th device.
To register another device, you need to delete
one
of the device from positionIto 5first.
•
If aBluetooth compatible device is successfully connected,
the next time when the ignition key
of the car is turned to
on, the unit will automatically connect to the previously
connected device. However, the connection mayfail.
If the
auto connection fails, try the connection manually.
•Set "Setting the Search Mode" (page 4) to
ON to enable
the KCE-400BT to recognize amobile phone. For mobile
phone passkey (passcode) input operation, refer to the
mobile's Owner's Manual.
3.EN

Bluetooth SETUP
Bluetooth Setup Operation
The following steps Ito 5are common to the various
Bluetooth functions. For details, refer to each individual
function.
•When placing or receiving acall or streaming audiofrom
the Bluetooth device, Bluetooth Setup operation cannot be
performed.
•Refer to the Owner's Manual of the CD Head Unit or
Digital Media Receiver, and set "BLUETOOTH IN"
or
"BT IN" to ADAPTER, and then perform Bluetooth
SETUP operation.
1Press and hold SETUP for at least 2
seconds.
2Turn the Rotary encoder or the Double
Action encoder to select the desired
setting items and press
ENT.
Settingitems:
BT IN HPAIR DEVICE*' HVISIBLE MODE*' H
AUTO ANSWER*' HCLEAR DEVICE*' H
SERVICE NAME*J/*2 H MIC INPUT*' H
SPEAKER SELECT*' H FW VERSION*' H
FWUPDATE*'
*' When "BLUETOOTH IN" or "BT IN" is set to
ADAPTER, the above items are displayed.
*2 Only for CDA-105 Series.
3Turn the Rotary encoder or the Double
Action encoder to change the settings and
pressENT.
4Press and hold ESC (or SETUP) or ~ for at
least 2seconds.
The SETUP mode is canceled.
setting the .BluetOothpevice
Select one of 5connected Bluetooth compatible devices that
you previously registered (the fifth registered by guest
mode*).
Setting item: PAIR DEVICE
Turn the Rotary encoder or the Double
Action encoder to select aBluetooth
compatible device you want to use (you want to
change connection), and then press
ENT.
• If the connection is successfully changed, "CONNECTED"
or "CONNECT" is displayedfor 2seconds, and then the
display returns to the SETUP screen.
• If you input the wrong passcode or communicationsfail,
"FAILED"
is displayed.
4.EN
•When amobile phone is paired with the unit, up to 1,000
telephone numbers will automatically be obtained
in the
telephone book (PHONE BOOK). Also, when the mobile
phone
is reconnected, new information on the mobile
phone will automatically be updated.
•Depending on the connected mobile phone, the telephone
book (PHONE BOOK) may not be automatically obtained.
If the telephone book cannot be automatically obtained, it
can be manually transferred to the adapter by referring to
the Owner's Manual
of the mobile phone.
• If you want to connect another Bluetooth compatible
device, after disconnecting the current Bluetooth
compatible device, connect the Bluetooth compatible
device you want to change
to.
The PIN code isfixed as "0000".
*Guest mode:
Use this mode for atemporary pairing. Registration (in
guest mode)
is canceled once the ignition key goesfrom
ACC to off.
setting the Search U()de
You can set whether the KCE-400BT can be recognized or
not from aBluetooth compatible device. Normally set this to
ON.
Setting item: VISIBLE MODE
ON: Enable recognition of the KCE-400BT from the
Bluetooth compatible device.
OFF: Disable recognition of the KCE-400BT from the
Bluetooth compatible device.
•Depending on the mobile phone, it may be necessary to
input apasscode.
For inputting the mobile phone's
passcode, refer to the mobile phone's Owner's Manual.
When acall is received, you can set whether to answer it
automatically or not.
Setting item: AUTO ANSWER
ON: When acall is received, it is answered
automatically after about 5seconds.
OFF: When acall
is received, it is not answered
automatically. Press
../ or \.. to receive the
call.
• If the received call setting on the mobile phone is on, the
call will be answered automatically even though this
setting
is set to OFF.

5.EN
Deleting a Bll.IMoofhD8vice ffomttleli~t
You can delete the history of apreviously paired Bluetooth
compatible device.
Setting item: CLEAR DEVICE
1Turn the Rotary encoder or the Double
Action encoder to select the Bluetooth
compatible device to be deleted and then
pressENT.
2Turn the Rotary encoder or the Double
Action encoder to select CLEARYES if you
want to delete and then press
ENT.
•Selecting CLEAR NO will cancel the setting.
Displaying the phone service provider name .
(CDA·105.Sern~J only)
Setting item: SERVICE NAME
The service provider name of the connected Bluetooth
compatible device will be displayed.
If aBluetooth
compatible device is not connected, "ID UNSENT" will be
displayed.
•Depending on the character type, some phone service
provider name may not be displayed.
Adjusting the volume for the microphone input
You can emphasise or weaken the microphone input volume
level.
Setting item: MIC INPUT
Turn the Rotary encoder or the Double
Action encoder to select the desired volume
level (0-15).
•This operation can be made for the unit ofCDE-101
Series/CDE-102 Series/CDE-W203 Series/CDA-10S
Series/iDA-X301 Series/iDA-X303 Series.
•The setting can be adjusted only when the Bluetooth
compatible device is connected.
•The setting cannot be adjusted during aphone call. Adjust
the setting before placing acall.
Selecting the OUtput speaker
You can select the connected speaker in car to output the
sound signal
of telephone.
Setting item: SPEAKER SELECT
ALL: The sound be output from all of speakers in
car.
F-L: The sound only be output from the front left
speaker.
F-R: The sound only be output from the front right
speaker.
F-LR: The sound be output from the front left and
front right speaker.
This operation can be made for the unit ofCDE-101
Series/CDE-/02 Series/CDE-W203 Series/CDA-lOS
Series/iDA-X301 Series/iDA-X303 Series.
The setting cannot be adjusted during aphone call. Adjust
the setting before placing acall.
Dlsplaying.the firmware version
Setting item: FW VERSION
The current firmware version will be displayed.
Upclatlng theflrmware
Setting item: FW UPDATE
With this setting, the Bluetooth firmware update function can
be activated.
For European users:
Future Bluetooth firmware update (for phone
compatibility) at customer end will be available for
Alpine products listed at (*').
For information to update your Bluetooth firmware,
please visit your local Alpine web site or choose your
country from Alpine Europe top page (http://
wwwalpine-europecom). For the products, which are
NOT listed at (*'), please contact your local official
Alpine dealer or Alpine support for your country.
*':iXA-W404R, iDA-X30S/303/301/301 RR, CDE-W203Ri,
CDE-10SRi, CDE-102Ri, CDE-IOIRIRM.
For American users:
Future Bluetooth firmware update (for phone
compatibility) at customer end will be available for
Alpine products listed at
(~).
For information to update your Bluetooth firmware,
please visit Alpine America home page (http://
www.alpine-usa.com).
For the products, which are NOT listed at
(*2), please
contact your local official Alpine dealer or Alpine
support for your country.
*2:iXA-W404, iDA-X30S/303, CDE-lOS, CDE-I02.
For Asian users:
Future Bluetooth firmware update (for phone
compatibility) at customer end will be available for
Alpine products listed at (*-I).
For information to update your Bluetooth firmware,
please visit Alpine Asia home page (http://
www.alpine-asia.com).
For the products, which are NOT listed at (*-I), please
contact your local official Alpine dealer or Alpine
support for your country.
*-I:iXA-W404E, iDA-X30S/303, CDE-W203E, CDE-10SE,
CDE-102E, CDE-101E/EM.
For Chinese users:
Future Bluetooth firmware update (for phone
compatibility)
at customer end will be available for
Alpine products listed at
(*4).
For information to update your Bluetooth firmware,
please visit Alpine China home page (http://
www.alpine.com.cn).
For the products, which are NOT listed at (*4), please
contact your local official Alpine dealer or Alpine
support for China.
*4:iXA-W404E, iDA-X30S, CDE-lOSE, CDE-102E, CDE-/OIE.
I

Hands-Free Phone
Control
About the Hands-Free Phone
Hands-free calls are possible when using aHSP (Head Set
Profile) and HFP (Hands-Free Profile) compatible mobile
phone with aALPINE Bluetooth compatible CD Head Unit
or Digital Media Receiver.
•Avoidperforming ahands-free call in heavy traffic or on
narrow or winding streets.
•Close the windows while calling to reduce background
noise.
•
If both calling parties are using hands-free devices, or the
call
is made in anoisy location, difficulty hearing the other
person's voice is normal.
•Depending on telephone line conditions or certain mobile
devices used, voices may sound unnatural.
•When using amicrophone, speak as directly as you can
into the microphone to pick up the best sound quality.
•Certain mobile phonefeatures are dependent on the
capabilities
and settings of your service provider's
network. Additionally, certain features may not be
activated by your service provider, and/or the provider's
network settings may limit thefeature's functionality.
Always contact your service provider aboutfeature
availability andfunctionality.
Allfeatures, functionality, and other product specifications,
as well as the information contained
in the Owner's
Manual are based upon the latest available information
and are believed
to be accurate at the time of printing.
Alpine reserves the right to change or modify any
information or specifications without notice or obligation.
6.EN
Answering a Call
Incoming calls are announced by the received call ring tone
and adisplayed message (Caller namelPHONE No.).
Digital Media Receiver:
Press \....
CD Head Unit:
Press ..,I.
•When "Answering Calls Automatically" (page 4) is set to
ON, you can receive acall automatically.
•While calling, the source sound on the unit
is muted.
Hanging up the Telephone
Digital Media Receiver:
Press \....
CD Head Unit:
Press ..,I.
Voice Dial Operation
You can call the telephone by performing voice operation.
1Press and hold \... or ..,I for at least 2seconds.
The speak mode is activated, and "SPEAK" is
displayed.
2Say the telephone number, name you want to
call into the microphone.
Pressing and holding \... or ..,I for at least 2
seconds will cancel the voice dial mode.
• If the voice dial fails, the unit will return to normal mode in
30 seconds.
•
You can perform this operation only when avoice dial
compatible mobile phone is connected.
If the mobile phone
is not compatible with the voice dial, "NO SUPPORT" is
displayed
for 2seconds.
•The Voice Dialfunction performance depends on the
recognition range
of the mobile phone and mounting
location
of the microphone. Note when the microphone is
mounted.
•This operation cannot be performed when the current
source is Bluetooth AUDIO, and "NO SUPPORT" is
displayed
for 2seconds.
•
If acalled person that you say is notfound, "NO CALL" is
displayed
for 2seconds.
•
Voice dial operation depends on thefunction of the mobile
phone. For details, refer
to the Owner's Manual of the
mobile phone.
•
If you place acall via voice dial, you cannot display a
phone number or name.

Adjusting the volume when
receiving a Call
While calling, you can adjust the volume. The adjusted
volume level is stored.
Turn the Rotary encoder or the Double
Action
encoder to adjust the volume.
• You may need to increase volume from your regular audio
listening source level. However, increasing the volume
excessively may result in feedback.
If feedback is noticed as
feedback is directly related to the volume, turn down the
volume as low as acceptable to eliminate
it. Positioning the
microphone
in adirection awayfrom the main car speakers
(e.g. clipped on sun visor) may also reduce feedback at
high volume.
Redial Function
You can redial the person you have previously called.
After finishing acall, press ",/ or \.. within 5
seconds.
The telephone is redialed.
Audio Switching Operation (CD Head
Don Only)
While making acall, this function allows you to initiate the
transfer
of the audio between the mobile phone and the
speakers
in the car.
While calling, press and hold ENT for at least 2
seconds to switch the call sound between the
speakers in car and mobile phone.
•Depending on the mobile phone, this operation may not be
peiformed.
Call History
Call History is recorded for the last dialed/received/missed
calls. There are various ways
of making calls based on the
"Call History." The following steps 1
to 4are common to the
various ways
of making these calls. For details, refer to each
individual category for making calls.
tPress",/ or \...
The outgoing method list is displayed.
2Turn the Rotary encoder or the Double
Action encoder to select the outgoing
mode.
Setting items :DIALED /RECEIVED /MISSED /
PHONE BOOK
DIALED :Dialed history
RECEIVED :Received history
MISSED :Missed incoming history
PHONE BOOK :Mobile phonebook
•The adapter will update the information in the Call History
automatically each time amobile phone is connected
or
receiving/dialing acall. At this time, ifyou select any
outgoing mode, "UPDATING" will be displayed.
3 PressENT.
The outgoing mode is activated, and each mode
list is displayed.
•It may take some time for the list to be displayed, and also
directly after connection, the list may not be brought up to
date.
4Turn the Rotary encoder or the Double
Action encoder to select aname or a
telephone number from the list.
5 PressENT.
The selected telephone will be called.
If one name has several numbers registered in the
telephone book for CD Head Unit, press ENT after
selecting the name*, then turn the Rotary encoder
to choose the desired number and press ENT, the
telephone will be called. Press and hold ENT for at
least 2seconds after selecting the name, the
default number of the name will be called.
Depending on the connected mobile phone, this
function may not be performed. (Only for CD Head
Unit)
* If the name cannot be recognized, default number will be
displayed.
• If you place acall directlyfrom the paired mobile phone,
the phone number is not displayed, you cannot redialfrom
the unit in this case.
7.EN
I

AediaUng a 'Number in DlaJedCalis. fiistory
Previously dialed telephone numbers are stored in dialed calls
history.
You can redial anumber by searching from dialed
calls history.
Setting item: DIALED
Dialing a Nl.lmbf!r IriRecelved Calls History
Telephone numbers from received calls are stored in the
received calls history.
You can redial these numbers by
searching here.
Setting item: RECEIVED
Dialing: a N(lm~r·tnMI$SldC~lIs History" ,
Telephone numbers for received calls that are missed are
stored in the missed calls history. You can redial these
numbers by searching here.
Setting item: MISSED
Up to I,000 telephone numbers are downloadable to the
Bluetooth compatible unit from amobile phone. Dial acall
by selecting aperson from the phone book list.
Setting item: PHONE BOOK
• If aname cannot be obtained via the phone book, only the
.. ------------" is displayed.
•The names registered in the telephone book are displayed.
If the name is not registered, anumber is displayed. If both
name and numbercannot be displayed. "ID UNSENT"
will be displayed.
•The names
of PHONE BOOK are listed alphabetically with
the same beginning alphabetical character, and can be
skipped to the next alphabetical character by pressing .... or
~.
e.g. press ~to the section beginning with alphabet Bfrom
A. (Only for CDA-I05 Series)
•The order
of the list display depends on the design of the
mobile phone.
•
If the call history or phonebook of the mobile phone is
added or deleted while it is connected to the unit. the list
displayed on the unit may not be brought up
to date. If it is
not updated, you cannot correctly place acall.
8.EN
Bluetooth Audio Function
Bluetooth Audio Operation
Audio information of aBluelooth compatible mobile phone, a
portable player, etc.,
is controllable/playable wirelessly* from
an ALPINE Bluetooth compatible CD Head Unit or Digital
Media Receiver.
* To play back audio, amobile phone or aportable player
conforming to A2DP (Advanced Audio Distribution
Profile) or AVRCP (AudioNideo Remote Control Profile) is
required.
Not allfunctions work with all devices.
•During acall, sound on the Bluetooth audio source is
muted.
aecallingtheo.BIl$IQQlh MOd$~'"
Press SOURCE to activate the Bluetooth audio
mode.
Press~.
Returns the beginning of the song being played back.
Press~.
Forwards the next song.
Press ~JlI.
Aplayback stops. Touching again will resume a
playback.

Accessories
Installation
x2
I
Velcro lastener Mounting
Velcro
fastener
Attach one side of theVelcro fastener to the box.
Remove the backing from the other side of the Velcro
strip. Gently press the adapter onto
its selected
mounting location.
For the sake of safety, mount the adapter in one of the
following locations.
•Do not mount the adapter under your feet. Do not step on
the adapter,
or press excessively on it.
•Before mounting the adapter, secure enough space at its
upper side to prevent noise or to result
in malfunction
when sending or receiving data.
•Depending on the adapter mounting location noise may
occur when using aBluetooth compatible device, or a
malfunction may result when sending
or receiving data. In
this case, mount the adapter
in another location.
xl
Power Cable
~
xl xl
Bluetooth Interface Cable
~
xl xl
Microphone Mounting
Brackets
DlDa
-
KCE-400BT Module
Microphone
Velcro Fastener
Check accessory parts.
Interconnection Cable
(Only for KCE-400BT
purchased In the Europe)
xl
Mounting the Microphone
For the sake of safety, mount the microphone in the following
location.
•
In astable and secure location.
•
In alocation that does not inhibit safely driving the
vehicle.
•Mount the microphone
in alocation where the driver's
voice can easily be picked up.
Choose alocation for the microphone that can easily pick up
the drivers voice. Requiring the driver to move towards the
mic for audibility causes adistraction that could be
dangerous.
Mount the microphone using the supplied Velcro
fastener
or the bracket.
9.EN

Connections
Connect a Bluetooth compatible unit and an iPhone/iPod to the Bluetooth INTERFACE
Before the operation, be sure to set "INT MUTE" and" AUX+" (in the setup function of the connected
head unit*) to OFF.
*Head unit includes CD Head Unit, AV Head Unit and Digital Media Receiver.
•When the KCE-400BT is connected to ahead unit, the
INT MUTE setting may not be possible, depending on the head unit.
•The AUX+ setting may not be possible, depending on the head unit.
•
For details, refer to the Owner's Manual of the head unit.
Connections for the head unit with Full Speed connector IBluetooth INTERFACE connector
Bluetooth compatible unit:
CDE-101 Series/CDE-102 Series/CDE-W203 Series/CDA-105 Series/iDA-X301 Series/iDA-X303 Series/iDA-X305 Series
Bluetooth compatible
Unit (Sold separately)
1---------------------- ....
$HALPINE
~
Mle
Ufo«TS
iPod
POWER
-
r-;;;;-------------l
iPhoneIiPod (Sold separately) I
I
I
I
I
I
I
I
I
l _
eI
I
I
I
I
I
I
I
I
Fuse (7.5 A)
®
®
®
®
(If the Bluetooth INTERFACE is
connected, you cannot use a
device connected to the INT lead
(voice Interruption, etc.).)
L _
CD To Full Speed connector IBluetooth
INTERFACE connector
@Bluetooth INTERFACE Cable (Included)
®The FULL SPEEDTM Connection Cable
(KCE-433iV) may be supplied with the head
unit. If not, purchase separately.
*This connection can be 11U1de only for the CDE-IOI Series/
CDE-J02 Series/iDA-X30J Series/CDE-W203 Series.
For
details, refer to the Owner's Manual of the Bluetooth
compatible head unit.
•An iPhone cannot be connected
for iDA-X30J Series.
@Microphone (Included)
lO.EN
®Audio Interrupt Out lead (Pink/Black)
Be sure to connect only when power is turned off,
as amalfunction may result.
®Audio Interrupt In lead (Pink/Black)
(j) ACC (Ignition) lead (Red)
To the ACC Power lead.
@Battery lead (Yellow)
Connect this lead to aterminal that constantly
provides power (to the positive (+) post of the
battery).
®Ground lead (Black)
Connect to ametal part of chassis body with screw.

Connections for the head unit with iPod Direct Connector
Bluetooth compatible unit:
CDE-9872, 9874 Series/CDE-9880R, CDE-9882Ri/CDA-988* Series/iDA-X001, 100,200,300 Series/IVA-W202, W205 Series/
IVA-W502, W505 Series/IVA-D105, D106 Series
•The head units CDE-9872 and CDE-9872L purchased in the America are not Bluetooth compatible. I
Bluetooth compatible
Unit (Sold separately) 1-----------------------.
®
(If the Bluetooth INTERFACE is
connected, you cannot use a
device connected to the INT
lead (voice interruption, etc.).)
®
®
®
Fuse (7.5 A)
I
L- I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
II I
i@* !I
~ J
,......------------
IIPod (Sold separately) I
!. i
@!
oI
oI
I
CD To iPod Direct Connector
®Interconnection Cable (KWE-460E) (Sold
separately)
*This connection is not available for the head units
purchased in the Europe. For the European users, please
refer to the card "Interconnection Cable for
KCE-400BT" supplied with the adapter.
@The FULL SPEEDTM Connection Cable
(KCE-433iV) (Sold separately)
@Microphone (Included)
@Audio Interrupt Out lead (Pink/Black)
Be sure to connect only when power is turned off,
as amalfunction may result.
®Audio Interrupt In lead (Pink/Black)
®ACC (Ignition) lead (Red)
To the ACC Power lead.
®Battery lead (Yellow)
Connect this lead to aterminal that constantly
provides power (to the positive (+) postof the battery),
®Ground lead (Black)
Connect to ametal part of chassis body with screw.
II.EN

Specifications
BLUETOOTH SECTION
Bluetooth Specification Bluetooth V2.0
Output Power
+4 dBm Max. (Power class 2)
Profile HFP (Hands-Free Profile)
HSP (Head Set Profile)
A2DP
(Advanced Audio Distribution Profile)
AVRCP
(AudioNideo Remote Control Profile)
GENERAL
Power Requirement
Weight
CHASSIS SIZE
Width
Height
Depth
12.EN
13.5V DC
(1 0-16 \j allowable)
96 g
95 mm (3-3/4")
25
mm (1")
77 mm (3')

•The Bluetooth word mark and logos are owned by the
Bluetooth SIC, Inc.
and any use of such marks by Alpine
Electronics,
Inc. is under license. Other trademark and
trade names are those of their respective owners.
•iPod is atrademark
of Apple Inc., registered in the U.S.
and other countries.
•iPhone is atrademark
of Apple Inc.

To customerslHinweis an Kunden/A I'attention de I'utilisateur/
Informacion para los clientes/lnformazioni per i clienti/
Till kunder/Aan klanten/AnR KnMeHToB/Do klient6w/npoC; TOUC; n&Aan:c;/
~\iP/~~F/as~~~
English
If this adapter is connected to the following units, certain operations may cause unstable state.
If this occurs, turn the ignition key off, then on again.
Operation: While placing or receiving acall
in the Bluetooth Audio source, turn the ignition OFF during the call.
State:
CD Though the ignition key is turned on again after performing the above described operation, the Bluetooth audio source cannot be played back, and
"NO DEVICE" appears
in the display on the head unit.
@If an iPhone/iPod is connected at the same time, the iPhone/iPod is displayed as "SEARCHING" and cannot be played back.
The connected units:
CDE-101 series /CDE-102 series /CDE-W203 series
Deutsch
Wenn dieser Adapter an die folgenden Geraten angeschlossen wird, k6nnen bestimmte Vorgange zu einem instabilen Betrieb fOhren.
Wenn dieser Fall eintritt, schalten Sie die ZOndung aus und dann wieder ein.
Vorgang: Wahrend
Sie in der Bluetooth-Audio-Quelle einen Anruf tatigen oder empfangen, schalten Sie wahrend des Anrufs die ZOndung auf OFF (Aus).
Zustand:
CD Obwohl die ZOndung nach dem AusfOhren des oben beschriebenen Vorgangs wieder eingeschaltet wurde, kann die Bluetooth-Audio-Quelle nicht
wiedergegeben werden und "NO DEVICE" wird
in der Anzeige des Hauptgerats angezeigt.
@Wenn zur selben Zeit ein iPhone/iPod angeschlossen ist, wird das iPhone/der iPod als "SEARCHING" angezeigt und kann nichtwiedergegeben werden.
Die angeschlossenen
Gerite:
CDE-101 Serie /CDE-102 Serie /CDE-W203 Serie
Franrais
Si cet adaptateur est raccorde aux unites suivantes, il est possible que certaines operations provoquent un etat instable du systeme.
Le cas echeant, coupez Ie contact, puis mettez-Ie anouveau.
Operation: Lorsque vous effectuez
ou recevez un appel dans la source audio Bluetooth, coupez Ie contact lors de I'appel.
Etat:
CD Bien que vous ayez remis Ie contact apres avoir effectue I'operation decrite ci-dessus, il est impossible de lire la source audio Bluetooth et I'indication
«NO DEVICE» s'affiche sur I'ecran de I'unite principale.
@ Si vous raccordez egalement un iPhone/iPod, I'unite affiche "SEARCHING» et la lecture de l'iPhone/iPod s'avere impossible.
Les unites raccordees :
Modeles
CDE-1 01 /Modeles CDE-1 02/ Modeles CDE-W203
Espaiiol
Si este adaptador se conecta alas siguientes unidades, es posible que no funcionen correctamente en determinadas condiciones.
Si esto ocurre, apague el contacto yvueIva aencenderlo.
Operaci6n: Mientras realiza 0recibe una lIamada en
la fuente de audio Bluetooth, apague el contacto (OFF) durante la lIamada.
Estado:
CD Aunque el contacto se encienda despues de haber realizado la operaci6n descrita anteriormente, la fuente de audio Bluetooth no se puede
reproducir y"NO DEVICE" aparece
en la pantalla de la unidad principal.
@ Si se conecta un iPhone yun iPod al mismo tiempo, el iPhone/iPod se muestra como "SEARCHING" yno se puede reproducir.
Las unidades conectadas:
Serie
CDE-1 01 /Serie CDE-1 02/ Serie CDE-W203
Italiano
Se I'adattatore viene collegato aile seguenti unita, eseguendo determinate operazioni potrebbero verificarsi anomalie di funzionamento.
In tal caso, spegnere eriaccendere il motore girando la chiave di accensione.
Operazione:
Se si esegue 0 si riceve una chiamata tramite la sorgente audio Bluetooth, spegnere il motore durante la chiamata.
Stato:
CD Anche se si riporta la chiave di accensione in posizione di accensione dopo aver eseguito I'operazione sopra descritta, non epossibile riprodurre
I'audio proveniente dalla sorgente Bluetooth, esui display dell'unita principale appare la dicitura "NO DEVICE" (Nessuna periferica).
@ Se contemporaneamente sj collega un iPhone/iPod, viene visualizzata I'indicazione "SEARCHING" (RICERCA IN CORSO) per I'Phone/iPod, ela
riproduzione non
puc essere eseguita.
Units collegate:
Serie CDE-101 /Serie CDE-102 /Serie CDE-W203
Svenska
Om denna adapter ar ansluten till f61jande enheter kan vissa funktioner orsaka ett instabilt tiIIstand.
Om detta uppstar ska du vrida av tandningslaset och darefter vrida
pa det igen.
Funktion: Vrid tandningen till avstangt lage (OFF) om du ringer eller tar emot ett samtal iBluetooth-Ijudkallan.
Tillstand:
CD Aven om tandningsnyckeln vrids pa efter att ovan namnda funktion utfOrts, kan inte Bluetooth-Ijudkallan spelas upp och "NO DEVICE" visas
ihuvudenhetens teckenf6nster.
@Om en iPhone/iPod ar ansluten samtidigt visas den som "SEARCHING" och kan inte spelas upp.
De anslutna enheterna:
CDE-1 01-serien /CDE-1 02-serien /CDE-W203-serien
KCE-400BT 68-14470Z45-A
(Y)

Dutch
Ais deze adapter op de volgende apparaten wordt aangesloten, kunnen bepaalde bewerkingen een onstabiele toestand veroorzaken.
Schakel
de contactsleutel eerst uit en daarna weer in, als dit gebeurt.
Bedlenlng: Schakel de contactsleutel UIT tijdens de oproep, wanneer uvia het Bluetooth-audio-apparaat belt of een oproep ontvangt.
Status:
CD Hoewel de contactsleutel na de bovengenoemde handeling weer wordt ingeschakeld, kan het Bluetooth-audio-apparaat niet worden afgespeeld.
Er verschijnt 'GEEN APPARAAT' op de display van de hoofdunit.
®Ais een iPhone/iPod tegelijkertijd is aangesloten, wordt de iPhone/iPod weergegeven als 'BEZIG MET ZOEKEN' en kan deze niet worden afgespeeld.
De aangesloten units:
CDE-101-serie /CDE-102-serie /CDE-W203-serie
Russian
nOl:\f<J1IO'leHlo1e a..o.anTepa K cJle,l1YlOlLIlo1M yCTpoHcTBaM MO)l(eT CTaTb nplo1'lIo1HOH c60eB Bpa60Te 06opy,l10BaHIo1R.
B TaKOM cJlyYae peKOMeH,l1yeTcR BbIKJlIO'lIo1Tb 101 BKJlIO'lIo1Tb 3~lo1raHlo1e.
3KcnnyaTa~I4R: Bo BpeMR Bb130Ba, BblnOJlHReMoro Io1JlIo1 nOJly'laeMoro c nOMOlLlblO Io1CTO'lHIo1Ka 3ByKa Bluetooth Audio, BbIKJlIO'lIo1Te 3~lo1raHlo1e (OFF).
COCTORHl4e:
CD Bpe3ynbTaTe BKJlIO'leHIo1R 3~lo1raHIo1R nocne BblnOJlHeHIo1R onlo1caHHoH Bblwe onepa~1011o1 Bocnp01013Be,l1eHlo1e C nOMOlLlblO Io1CTO'lHIo1Ka 3ByKa Bluetooth
HeB03MO)l(HO; Ha ,l1lo1cnnee 6a30Boro 6JlOKa BbIBO,l1Io1TCR Ha,l1nlo1Cb "NO DEVICE" ("YCTpOHCTBO oTcyTcTByeT").
®B cny'lae O,l1HOBpeMeHHoro nO,l1KJlIO'leHIo1R yCTpoHcTBa iPhone/iPod, yCTpOHCTBO iPhone/iPod oTo6pa)l(aeTCR KaK "SEARCHING" ("nOIo1CK");
Bocnp01013Be,l1eHlo1e HeB03MO)l(HO.
nOAcoeAI4HeHHble yCTpoMcTBa:
Ceplo1R CDE-101/ Ceplo1R CDE-102/ Ceplo1R CDE-W203
Polish
Jesli adapter zostanie podlqczony do innych urzqdzen, kt6re wymieniono poniiej, niekt6re dzialania mogq powodowac problemy.
Wtakim wypadku naleiy ustawic kluczyk wstacyjce wpozycji OFF (WYt.) , a nast~pnie ponownie ustawic go wpozycji ON (Wt.).
Dziatanie: Przed nawiqzywaniem iodebraniem polqczenia za pomocq zr6dla Bluetooth Audio naleiy ustawic kluczyk wstacyjce wpozycji OFF (WYt.).
Stan:
CD Chociai: po wykonaniu powyiszych czynnosci kluczyk wstacyjce ponownie ustawia si~ wpozycji ON (Wt.), nie moina odtwarzac dzwi~ku ze zr6dla
Bluetooth Audio, a na wyswietlaczu urzqdzenia gl6wnego pojawia si~ komunikat "NO DEVICE" (BRAK URZADZENIA).
®Jesli do urzqdzenia jest jednoczesnie podlqczony telefon iPhone/odtwarzacz iPod, zamiast jego nazwy na wyswietlaczu pojawia si~ komunikat
"SEARCHING" (WYSZUKIWANIE) i z telefonu/odtwarzacza nie moina odtwarzac dzwi~ku.
PodIllczone urzlldzenia:
CDE-101 /CDE-102 /CDE-W203
Greek
Eav aUToc; 0 ~ETaTponEac; ouv~E8Ei ~E TIC; aKohou8EC; ~OVa~EC;, OPIO~EVEC; hEITOUpyiEC; EV~EXETOl va npoKahEoouv aOTa8i) KaTaOTaCJ11.
LE aUTi)v TTlV nEpimwCJ11, OI3i)OTE Tfl ~i~a Kal, OTT] ouvExela, aValjJTE Tflv !;ava.
AelToupyia: Evw npaY~QTOnOleiTe i) ha~l3aveTe ~la Khi)CJ11 OTTlV nTJyi) i)xou Bluetooth, OI3i)OTE Tfl ~i~a KaTa TTl ~laPKEla TflC; KhTiCJ11C;.
KaTCJOTaOIl:
CD napOho nou Tl ~i~a eVEpyonOlEiTOl !;ava ~ETa TTlV EKTEhECJ11 TTlC; helToupyiac; nou neplypa<l>eTOl napanavw, ~ev eivOl ~uvaTi) Tl avanapaywyi)
TTlC; nTJyi)c; i)xou Bluetooth KOl Tl Ev~el!;Tl "NO DEVICE" (~ev UnaPXel OUOKEUi)) E~<l>avi~ETOl OTT]v 080vTl TTlC; Kuplac; ~ova~aC;.
®Eav tva iPhoneliPod ouv~E8E[ TTlV [ola OTlYIli), TO iPhone/iPod EIl<l>av[~ETQl we; "SEARCHING" (ava~i)TlJOT]) Kal OEV E[val ~uvaTTi II avanapaywyi) TOU.
01 auvlieliell£vec; lIovalieC;:
Lelpa CDE-101 / LElpa CDE-102/ LElpa CDE-W203
JPJ< (~)
~**~~~~~~~T~m'~~~ff~~~~~~~1'~~'
~*a~~.~'.~Mm*~~'~.Nrr~·
~ff:~ffl~~fi.~H.rr.~~.~~'~.~~fi$~Mm*~~·
~l!!l:
CD !ElE~~~fj' ...tjitiffl&N;xrr~'li*~~m ' m~~$M\1ij{~~fi. 'H "NO DEVICE" tJjJ.l!l£:±-ttlB"Jlm7f;<:IJ...t·
® ~O*l"llf,'f~~ iPhone/iPod 'iPhone/iPod ~lm7f,~ "SEARCHING" H~itM\1ij{·
jjm~~~:
CDE-101 ~91J /CDE-102 ~91J /CDE-W203 ~91J
f/1:Jt (!'If)
llD**mnc~Ej 1:), Ttt'.iiUl~, ~J~H~frjjJfjg~~~~;;§::t'~,jE.
~*£~~".&, ~m~*H~,.€~nH .
•
w:~m~~~~#ftttn~~~~~~,fr~~u~$~m~*H~.
~~:
CD ~~~tMT...ti£~f1=€~(j;:nH~*H~, 11!7i:¥ttl1.&~~~~, ft:±;j'J1.3f.7f,gUllil!.\\ "NO DEVICE" •
® llD*~~ii~ iPhone/iPod, iPhone/iPod ~lR7f,1J "SEARCHING" ft7i:¥tM\1.&.
ii~~~.:
CDE-101 ~91J /CDE-102 ~9U /CDE-W203 ~9U
!lJJ<
*f1ita:J...j~~6fie*'§i1f"i3"t)"tt"Ccr>~L, )1;:ta:~~"i3", ~:lE(7)f*{'fta:lj5 L. e C*f1i(7)IJ.J{'fb'1'3(':lEeta:~~"i3"b'<l51J *9.
-t(7)~Id:, -{:1= 'Y Y3 /=f-ta:-)!t OFF I;: Gic<l5e, ~)!t-{:1= 'Y Y3 /=f-ta: ON I;: G"C < ic.~L,)o
~fF :Bluetooth ::t-j' -{ ::t:J- :::zta:~~epl;: Bluetooth mffl~~3C(7)~j~ I fi~b'<l5IJ, iB!i~Mi;;J;ll(7)**-{:1= 'Y Y3 /=f-ta: OFF 1;:9~0
~lt!l:
CD _bmf*{'f~I;:~)!t-{:1= 'Y Y3 /=f-ta: ON I;: L,"c'tJ Bluetooth ::t-7' -{ ::t:J- :::Zb'~~c~ta:L,). *icA..'Y ~.::l= 'Y t--~mml;: rNO DEVICEJ
c::~mc!fl0.
®iPhone/iPod ta:1B.I1F-¥1;:m~ L, "cL, )~~"i3", iPhone/iPod b' rSEARCHINGJ ~m(7)** eta: IJ ~~c~ta:L,).
t-.t.etrI.Qm~~~
CDE- 101 Jj /CDE- 1 02Ji /CDE-W203Ji

About the Rules of Bluetooth Electromagnetic Radiation Regulation' ~Tll[~B9E@jJt
)!~.w.:iE~* 'Bluetooth ::; '21 011 Al ~ n~ 'g;l rt ~'rI~~~~.)&)Zi~~~~* , Acerca das
Regras de Regula~ao da Radia~ao Electromagnetica da Bluetooth 'Informacion
sobre la Normativa sobre radiacion electromagnetica para dispositivos Bluetooth
Country I ~~ IRules of Electromagnetic Radiation Regulation I ff!.lButJ~Ji I ~.m gj rt ~ /1l[i&:itJlJi /
~J ~ 11iI~ IPais IRegras de Regula~ao da Radia~ao Electromagnetica INormativa sobre la radiaci6n electromagnetica
Pais
USA/Canada
Europe
Brasil
Mexico
UAE
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
This class Bdigital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe
Best conforme a la norme NMB-003 du Canada.
FCC WARNING
Changes
or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for aClass Bdigital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference
in aresidential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in aparticular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on acircuit different from that to which the receiver is
connected.
-Consult the dealer
or an experienced radiolTV technician for help.
This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
(E:
Declaration of Conformity
•Refer to the next page.
1ftJ;i]$mi&:m~i't1mf~~JI¥jJ¥it; (930322)
m+=. [email protected]~~fi0$~gm.,#~~m'0~· •• ~~m~~~mM~~£g$·
~*0$~~£~~~~~tl&0~o
m+[gil~ 1ft0$~tgmf~~i~m~f~'J~7IUit~~&Ttfftit;jffil;3; ~Jl1~J~1'lTtfJ~~Hif ' B!:lIE!nw
m'~&~~~Ttf~nm~~~mo
M~ft$jffim,m~mm$m~w.~~.mamo
m~$~gm.~~~ft$jffim~I.·M.&g.mm.m~tlm.~.~Ttfo
Resolu~ao 365 -ANATEL:
"Este equipamento opera em can:iter secundario, isto
e, nao tem direito a prote~ao contra
interferencia prejudicial, mesmo de
esta~6es do mesmo tipo, enao pode causar interferencia a
sistemas operando em carater primario."
Para consultas, visite: www.anatel.gov.br
Este equipamento esta homologado pela ANATEL de acordo com os procedimentos regulamentados
pela
Resolu~ao 242/2000 eatende aos requisitos tecnicos aplicados.
Este equipo opera atitulo secundario, consecuentemente, debe aceptar interferencias perjudiciales
incluyendo equipos de la misma clase ypuede no causar interferencias asistemas operando atitulo
primario.
Approved by TRA

Alpine Electronics, Inc.
20-1 Yoshima- Kogyodanchi, Iwaki, Fukushima 970-1192, Japan
Phone: [phone] Fax: [phone]
Declaration of Conformity
We, the undersigned,
Authorized representative in Europe :Alpine Electronics (Europe) GmbH
------------------------------------------------------------------------------------------------------------------------------.-
Address, City :Frankfurter Ring 117,80807 Munich
------------------------------------------------------------------------------------------------------------------------------_.
Country :Germany
certify and declare under our sole responsibility that the following apparatus:
Description : CD Player with Radio Receiver
------------------------------------------------------------------------------------------------------------------------------ ..
Manufacturer : Alpine Electronics, Inc.
------------------------------------------------------------------------------------------------------------------------------_.
Brand :ALPINE
------------------------------------------------------------------------------------------------------------------------------_.
Identification :KCE-400BT (MXAG808A)
._----------------------------------------------------------------------------------------------------------------------------_.
Installed BlueTooth module :CK5050
------------------------------------------------------------------------------------------------------------------------------_.
Test Report No. :EMITECH ATLANTIQUE Laboratory
------------------------------------------------------------------------------------------------------------------------------_.
Radio :RA-24-08102396-1/A Ed.O
-------- -------_ .. _-----
EMC :RA-22-08102396-1/A Ed.O
LVD :RA-26-08102236-1/A Ed.O
-----_ .. _--
conforms with the essential requirements of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC,
based on the following specifications applied:
Radio: EN300328 V1.7.1(2006-10)
EMC :EN301489-1 V1.6.1(02), EN301489-17 V1.2.1(02)
LVD :EN60950-1 2001/A11 2004
·ar;dthe-rE;forecomp~es-wilfi-fhe-esse-ritiaire-quirements-an<fprovisions-of-the-R&TTE-Oirecliv-e.------------------------------.
The Technical documentation is kept at the following address:
Company :Alpine Electronics (Europe) GmbH
------------------------------------------------------------------------------------------------------------------------------_.
Address, City :Frankfurter Ring 117,80807 Munich
._----------------------------------------------------------------------------------------------------------------------------_.
Country :Germany
------------------------------------------------------------------------------------------------------------------------------_.
Phone number :49(0)89-324264-240
._----------------------------------------------------------------------------------------------------------------------------_.
Fax number/e-mail :49(0)89-324264-241
Name and position of person
binding the manufacturer
or his
authorized representative
Signature of the authorized person :
Date
of issue
Shinichi Asuke
Development Planning Dept.
Alpine Electronics, Inc.
October
09, 2008

1'i.1'i~!Jo/J~E.tJC~
$#~~
m*m
:k~
$;l~liE
~;l=liEM
(Pb) (Hg) (Cd) (Cr(VI» (PBB) (PBDE)
~JlM&mi!f *x00000
~~mi!f
0 0 0 0 00
111m:
0000 0 0
0: *:if-~1'i.1'i~!Jo/JJBH':E~!iH!fJiJT1'i~~M*4tp~*.~.f£ SJfT 11363-2006
«~Tm~~~tp1'i.1'i~!Jo/J~~~.
~*f;j;*)} AA!:iE~~~.~*~~1'.
x: *:if-~1'i.1'i~!fPJ~~1-'.f£~$i!f~~-~JBtM*4tp~*.Jmt/:j SJfT 11363-2006
«~Tm,~,~~tp1'i.1'i~!Jo/J~
~~.~*f;j;*)}AA!:iE~~.~*; @~~.tpn «x"~$~, X* •• t/:j~~~~.~W~~1'i •• ~~~~~tt
*.
* ~JlM&m#E!fficp.lf,lJ~lt!t&R.X~.~~$i!f, :llll~mL ~~, •• ~lt!, ii1ii§~.

SINO. LABEL