WARNING
Points to Observe for Safe Usage
• Read this manual carefully before using this system-
components. They contain instructions on how to use
this product in a safe and eective manner. Alpine
cannot be responsible for problems resulting from
failure to observe the instructions in this manual.
• This manual uses various pictorial displays to show
you how to use this product safely and to alert you to
potential dangers resulting from improper connec-
tions and operation. Following are the meanings
of these pictorial displays. It is important to fully
understand the meanings of these pictorial displays
in order to use this manual and the system properly.
• Be sure to use an Alpine Digital Mirror Installation Kit
(sold separately) to install this product into your vehi-
cle. The use of other installation methods may create
the risk of danger to driver and passengers.
WARNING
• Operation of the system while driving is dangerous.
Users should stop vehicle before operating the
product.
WARNING
This symbol means important instructions. Failure to
heed them can result in serious injury or death.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to
do so may result in re, etc.
USE THIS PRODUCT FOR MOBILE 12V APPLICA
TIONS.
Use for other than its designed application may result
in re, electric shock or other injury.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in
re or product damage.
BEFORE WIRING, DISCONNECT THE CABLE FROM
THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury
due to electrical shorts.
USE THE CORRECT AMPERE RATING WHEN REPLAC
ING FUSES.
Failure to do so may result in re or electric shock.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the
manual to prevent obstructions when driving. Cables
or wiring that obstruct or hang up on places such as
the steering wheel, gear lever, brake pedals, etc. can be
extremely hazardous.
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special
technical skill and experience. To ensure safety, always
contact the dealer where you purchased this product
to have the work done.
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swal-
lowed, consult a physician immediately.
CAUTION
This symbol means important instructions. Failure to
heed them can result in injury or material property
damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage
to the product. Return it to your authorized Alpine
dealer or the nearest Alpine Service Center for repair.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts
(like the seat rails) or sharp or pointed edges. This will
prevent crimping and damage to the wiring. If wiring
passes through a hole in metal, use a rubber grommet
to prevent the wire’s insulation from being cut by the
metal edge of the hole.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, re or electric
shock.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HIN
DER VEHICLE OPERATION, SUCH AS THE STEERING
WHEEL OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper
movement etc. and results in serious accident.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to
other equipment. Doing so will exceed the current car-
rying capacity of the wire and result in re or electric
shock.
4-EN
