ALS FLEXY 300 CRI90 User manual

Version: 2021-05-21 EN
Protection class III Notication of Risks
CE label Safety Instructions
The light can be
used in interiors and
exteriors.
Cleaning Instructions
The product may not
be disposed of in the
household garbage.
Don’t look directly into
the LED! The LED is that
bright that it might
damage your eyes!
Installation only by
qualied and autho-
rised persons.
INTENDED USAGE
This product will only serve the purpose of illumination.
The LED-stripe can be used in interiors.
SCOPE OF DELIVERY
1 x FLEXY 300
1 x set of instructions for assembly, operation and safety
SAFETY
READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT.
KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR
FUTURE USE.
DESCRIPTION OF PARTS
Flexible LED-stripe 24W (4,8W/m) 50x0,48W/24Vdc
CRI>90
TECHNICAL DATA
FLEXY-300WWN-CRI90 = 3000K, width: 8 mm
FLEXY-300CWN-CRI90 = 6000K-6500K, width: 8 mm
Lenght: 5m = 50 segments à 100mm | 300 LED = 50 segments à 6
LED | are cuttable after each segment
FLEXY-300WWN-CRI90N = 3000K, width: 8 mm
Lenght: 5m = 50 segments à 100mm | 350 LED = 50 segments à 6
LED | are cuttable after each segment
LAMP
SMD--LED
The LED light agent cannot be replaced.
DISPOSAL
The packaging consists of environmentally friendly materials.
Dispose of them in the local recycling containers.
Do not dispose of this product in the household gar-
bage when it has reached the end of its lifecycle, but
rather take it to a disposal center.Your local ofcials
will provide you with information about collection
ofces and their business hours.
MAINTENANCE AND CLEANING
The LED light agent cannot be replaced.
• Do not use solvents,such as benzene and similar
agents.The light would be damaged thereby.
• Only use a dry, lint-free cloth for cleaning the
product.
FLEXY 300 CRI90
Flexible LED-stripe
FLEXY-300WWN-CRI90
FLEXY-300CWN-CRI90
FLEXY-300WWN-CRI90N
SAFETY INFORMATION
• The light can be used in interiors.
• Before mounting, the intended splice must be thoroughly
cleaned (free from dust, oil and grease layers).
• Assembly only on suitable carrier material, for example
Aluminum regarding heat conduction as well as reliable
adhesion of the adhesion foil.
• Don’t install under power.
• Follow the instruction manual for installation.
• Installation only by qualied and authorised persons.
• Do not use the product when it has been damaged (defective
covers) or there are operational faults such as ickering,
smoking, steaming,crackling noises or the smell of smoke.
• A damaged or defective product must be changed
or repaired by the manufacturer, a service person or a
comparable qualied person.
• Installation only under observance of the valid guidelines
specic to application and country among others VDE 0.100.
• Never open one of the electrical operating agents or plug any
objects into them. Such procedures signify a danger to life
through electrical shock.
• Absolutely avoid contact between the product and water or
other liquids. For reasons of electrical safety, the light may not
be placed in contact with water or other liquids or submerged
in water.
• The product may not be changed or modied.
• In operation or after extended periods of operation, avoid
touching the external surface of the LED luminaire, there is a
danger of high temperatures that can cause burns.
• Do not use the LED luminaire in areas with explosive or
chemical aggressive atmosphere or reduced ventilation.
• The warranty claim and guarantee is rendered invalid in the
event of damage to the product, which is caused by not
following the operating instructions.We are not liable for the
consequent damage. Because of specic characteristics of
LED‘s (life, deviation in colour etc.) we formulated special
terms for planing and installing our LED products.They
are part of these installation manual! Should they not be
available, request them please!
• Don’t look directly into the LED! The LED is that bright that it
might damage your eyes!
address | contact
A.L.S. GmbH & Co. KG
Mastorter Str. 31 | 88069 Tettnang (Germany)
Tel.: [phone] | Fax.: [phone]
E-Mail: [email protected] | Web: www.als.de

Assembly instructions
Turn Off power supply before starting any installation.
Do not connect the device under power.
Another installation / assembly / materials / types than provided in the
manual sheets, release us from any electrotechnical and electrostatic re-
sponsibility.
It is recommended that these products are installed by a qualied elec-
trician.
01. Only install on a suitable base (aluminium - thermal management,
grip).
02. Can be cut to length ...
03. ... only at certain points!
02 03
+
-
black
red
04
05 06a
06b 06c
0807
04. Power supply 24V DC
red = plus (+) / black = ground (-).
Do not wire the wrong way! Connect the module only with a suitable LED-
power supply 24V DC constand voltage and enough power.
05. A feed line can be soldered to the remainder module.
06a. Segments can be connected by soldering of abridge.
Solder up the upper soldering point (pict. 06b) with the lower point (pict.
06c). Soldering points become visible as soon as protection foil is taken
off. Don’t take off the foil completely as not to lose the adhesive
power of FLEXY. Attention! Maximum 5m of Flex strip can be installed with
one feeder. For more, additional feeding is required.
07. Minimum radius of bending 3 cm.
08. Do not bend, bending will damage the conductors.
01
!