ALS FLEXY2-600SW User manual

Version: 2020-09-29EN
FLEXY2-600 CRI80/CRI90
Flexible LED-stripe
FLEXY2-600SW/FLEXY2-600SW-CRI90
FLEXY2-600WW/FLEXY2-600WW-CRI90
FLEXY2-600NW/FLEXY2-600NW-CRI90
TEILEBESCHREIBUNG
LED-FLEX-MODUL, 600 LED´s, 600 LED/5 m, 100 segments à 6 LED,
beam 120°, SMD LED, IP20, self-adhesive backing
TECHNISCHE DATEN
24VDC,120 LED per meter x0,16 = 19,2W/m ges. 96W per roll
5m, Width: 10mm, cuttable every 50 mm contact points
Farbtemperatur:
FLEXY2-600SW/FLEXY2-600SW-CRI90 (2700K)
FLEXY2-600WW/FLEXY2-600WW-CRI90 (3000K)
FLEXY2-600NW/FLEXY2-600NW-CRI90 (4000K)
INTENDED USAGE
This product will only serve the purpose of illumination.
The LED-stripe can be used in interiors.
SCOPE OF DELIVERY
1 x ESD packaging, content, exy stripe 5m
1 x set of instructions for assembly, operation and safety
address | contact
A.L.S. GmbH
Mastorter Str. 31 | 88069 Tettnang (Germany)
Tel.: [phone] | Fax.: [phone]
E-Mail: [e-mail] | Web: www.als.de
SAFETY INFORMATION
• The exy stripe is only suitable for indoor use (dry and closed
rooms).
• Before mounting, the intended splice must be thoroughly
cleaned (free from dust, oil and grease layers).
• Assembly only on suitable carrier material, for example
Aluminum regarding heat conduction as well as reliable
adhesion of the adhesion foil.
• Don’t install under power.
• Follow the instruction manual for installation.
• Installation only by qualied and authorised persons.
• Do not use the product when it has been damaged (defective
covers) or there are operational faults such as ickering,
smoking, steaming, crackling noises or the smell of smoke.
• A damaged or defective product must be changed
or repaired by the manufacturer, a service person or a
comparable qualied person.
• Installation only under observance of the valid guidelines
specic to application and country among others VDE 0.100.
• Never open one of the electrical operating agents or plug any
objects into them. Such procedures signify a danger to life
through electrical shock.
• Absolutely avoid contact between the product and water or
other liquids. For reasons of electrical safety, the light may not
be placed in contact with water or other liquids or submerged
in water.
• The product may not be changed or modied.
•
•
•
Keep the product and its components out of the reach of
children. Do not leave packaging material lying around
carelessly, there is danger of suffocation. The product is not a
toy for kids!
Risk of injury for children! If children or persons who can not
assess the dangers use the product, there is a risk of injury!
The warranty claim and guarantee is rendered invalid in the
event of damage to the product, which is caused by not
following the operating instructions. We are not liable for the
consequent damage. Because of specic characteristics of
LED‘s (life, deviation in colour etc.) we formulated special
terms for planing and installing our LED products. They
are part of these installation manual! Should they not be
available, request them please!
•Don’t look directly into the LED! The LED is that bright that it
might damage your eyes!
• Storage temperature -40-+80°C
• Processing temperature: +10°C (glue)
• Operating temperature in operation: -25-+60°C
SAFETY
READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT.
KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR
FUTURE USE.
MAINTENANCE AND CLEANING
The LED light agent cannot be replaced.
• Do not use solvents, such as benzene and similar
agents. The exy stripe would be damaged thereby.
• Only use a dry, lint-free cloth for cleaning the
product.
LAMP
SMD--LED
The LED light agent cannot be replaced.
DISPOSAL
The packaging consists of environmentally friendly materials.
Dispose of them in the local recycling containers.
Do not dispose of this product in the household gar-
bage when it has reached the end of its lifecycle, but
rather take it to a disposal center. Your local ofcials
will provide you with information about collection
ofces and their business hours.
Protection class III Notication of Risks
CE label Safety Instructions
The light can be
used in interiors and
exteriors.
Cleaning Instructions
The product may not
be disposed of in the
household garbage.
Don’t look directly into
the LED! The LED is that
bright that it might
damage your eyes!
Installation only by
qualied and autho-
rised persons.
Do not expose pro-
duct to heat source
ESD protection com-
ponent
Not recommended
for children under 3
years

01. Only install on a suitable base (e.g. aluminium) to ensure sufficient heat transfer to
the environment.
Attention: When mounting on an electrical conductive base, an additional,
overlapping insulation (adhesive foil) is required.
02. Can be cut to length ... 03. ... only at marked points. 04. Power supply 24V DC
red = plus (+) / black = ground (-). Do not wire the wrong way! Connect the module
only with a suitable LED-power supply 24V DC constand voltage and enough power.
05. A feed line can be soldered to the
remainder module.
06a. Segments can be connected by soldering of abridge. Solder up the upper soldering point (pict. 06b) with the lower point (pict. 06c).
Soldering points become visible as soon as protection foil is taken off. Don’t take off the foil completely as not to lose the adhesive
power of FLEXY. Attention! Maximum 5m of Flex strip can be installed with one feeder. For more, additional feeding is required.
Attention! When mounting on an electrical conductive base, an additional, overlapping insulation (adhesive foil) is required.
07. Minimum radius of bending 3 cm. 08. Do not bend, bending will damage the
conductors.
FLEXY2600
0
8
07
06c
06b
06a
05
schwarz /
black
rot / red
0
4
03
02
01