Alto-Shaam HALO HEAT 500-S/TMS User manual

500-S/TMS
LOW TEMPERATURE HOT HOLDING CABINET
WITH CARVING SHELF
D U E T O O N G O I N G P R O D U C T D E V E L O P M E N T,SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.P R I N T E D I N U .S.A. #23A - 11/07
ITEM NO. _______________________
W164 N9221 Water Street • O Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
HONE: 262.251.3800 • 800.558.8744 U.S.A./ CANADA FAX: [phone] • 800.329.8744 U.S.A.ONLY
WEBSITE: www.alto-shaam.com
ANSI/NSF 4
A heated carving shelf on a single compartment heavy duty holding cabinet with 22 gauge stainless steel door with
magnetic catch. The removable carving shelf has one adjustable thermostat with a range of 1 through 10, one 250 watt
adjustable infrared heat lamp, and one cutting board. The cabinet has one (1) ON/OFF adjustable thermostat, 60° to
200°F (16° to 93°C); one (1) indicator light; and one (1) holding temperature gauge to monitor inside air temperature.
Included are two (2) chrome plated side racks (230V models use stainless steel) with eleven (11) pan positions spaced at
1-3/8" (35mm) centers, two chrome plated wire shelves, and one (1) set of 3-1/2" (89mm) heavy duty casters – 2 rigid
and 2 swivel with brake.
■■MODEL 500-S/TM: Heavy duty holding cabinet with heated shelf base mounted directly on top, without
sneeze guard.
■■MODEL 500-S/TMS: Heavy duty holding cabinet with heated shelf base mounted directly on top, with
sneeze guard.
500-S/TMS
ELECTRONIC CONTROL O TION FOR HOLDING CABINET
■■Solid state electronic control option simplifies temperature setting and
has a clear, easy-to-read LED display and includes our patented
SureTemp™ heat recovery system. SureTemp™ reacts immediately to
compensate for any loss of heat whenever the door is opened.
■■Electronic control is also available with six independent multiple timers
for each compartment to facilitate “first-in, first-out” concept.
1234 56
1234 56
● HALO HEAT…a controlled, uniform heat source that gently surrounds
food for better appearance, taste, and longer holding life.
● Holds hot food hot...meat, poultry, fish, potatoes, casseroles, vegetables,
rolls, etc.
●Close temperature tolerance and even heat application maintain ideal serving
temperatures.
● Non-magnetic stainless steel interior resists corrosion.
●Lamp assembly provides additional heat to the product surface.
●Carving shelf surface is recessed to catch drippings.
●Sanitary cutting board with gravy lane is completely removable.
NSF and USDA listed.
●Antimicrobial handle retards the growth of illness-causing pathogens.
●Casters provide easy mobility.
FACTORY INSTALLED O TIONS
●Right-hand door swing is standard.
■■➥ Specify left-hand door as a
special order.
ADDITIONAL FEATURES
●Optional HACCP Documentation web-based
software provides the ability to monitor, store,
and print all relevant data.
●Optional HACCP with itchen Management
web-based software provides the ability to
program, control, monitor, and store all
relevant data.

D U E T O O N G O I N G P R O D U C T D E V E L O P M E N T, S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A.#23 A - 11 /0 7
W164 N9221 Water Street • O Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
HONE: 262.251.3800 • 800.558.8744 U.S.A./ CANADA FAX: [phone] • 800.329.8744 U.S.A. ONLY
WEBSITE: www.alto-shaam.com
17-7/8" (454mm)
25-1/2" (648mm)
25-1/8" (637mm)
33-1/16" (839mm)
21" (532mm)
with optional bumper
27-3/4" (705mm)
29-1/4" (743mm)
with optional bumper
3" (76mm)
57-5/16" (1455mm) - with 3-1/2" casters*
42-15/16" (1091mm) with optional bumper
39-13/16" (1011mm)
8-15/16"
(227mm)
Electrical
Connection
*58-11/16" (1490mm) - with optional 5" casters
*56-5/16" (1430mm) - with 2-1/2" casters
*58-15/16" (1496mm) - with optional 6" legs
18-5/16"
(465mm)
D I M E N S I O N S : H x W x D
EXTERIOR:
57-5/16" x 18-5/16" x 25-1/2" (1455mm x 465mm x 648mm)
CABINET INTERIOR:
20" x 14-3/8" x 21-1/4" (508mm x 366mm x 540mm)
E L E C T R I C A L - C A R V I N G S H E L F
VOLTAGE HASE CYCLE / HZ AM S kW CORD & LUG INCLUDED
125 1 60 6.0 .75 NEMA 5-15 P , 15A-125 V PLUG
230 1 50 3.4 .75 CEE 7/7, 220-230V PLUG
E L E C T R I C A L - H O L D I N G C A B I N E T
VOLTAGE HASE CYCLE / HZ AM S kW CORD & LUG INCLUDED
120 1 60 8.3 1.0 NEMA 5-15 P , 15A-125 V PLUG
208-240 (UL)1 60 4.2 1.0 NEMA 6-15 P ,
at 208 1 60 3.7 .76 15A-250 VPLUG
at 240 1 60 4.2 1.0 (USA ONLY)
230 1 50 4.1 .95 CEE 7/7, 220-230V PLUG
15A-125V PLUG
NEMA 5-15P
20 AMP 125 VOLTS
PLUG, NEMA 5-20P
PLUG: NEMA 6-15P
15A, 250V
PLUG, CEE 7/7 (SCHUKO)
16 AMP 250V (#701410)
15A-125V PLUG
NEMA 5-15P
20 AMP 125 VOLTS
PLUG, NEMA 5-20P
PLUG: NEMA 6-15P
15A, 250V
PLUG, CEE 7/7 (SCHUKO)
16 AMP 250V (#701410)
PLUG,CEE 7/7 (SCHUKO)
16AMP 250V (#701410)
PLUG,CEE 7/7 (SCHUKO)
16AMP 250V (#701410)
P R O D U C T \ PA N C A PA C I T Y
CARVING SHELF:40 lb (18 kg) MAXIMUM
HOLDING CABINET:
60 lb (27 kg) MAXIMUM • VOLUME MAXIMUM: 50 QTS (47.5 LTR)
FULL-SIZE ANS:GASTRONORM 1/ 1:
Five (5) 20" x 12" x 2-1/2" 530mm x 325mm x 65mm
Four (4) 20" x 12" x 4" 530mm x 325mm x 100mm
HALF-SIZE ANS:GASTRONORM 1/ 2:
Ten (10) 10" x 12" x 2-1/2" 265mm x 325mm x 65mm
Eight (8) 10"x 12" x 4" 265mm x 325mm x 100mm
OPTIONS & ACCESSORIES
■■Bumper, Full Perimeter, for cabinet 5006782
■■Carving Holder, Prime Rib HL-2635
■■Carving Holder, Steamship (Cafeteria) Round 4459
Casters, Stem - 2 RIGID, 2 SWIVEL W/BRA E
■■5" (127mm) 5004862
■■2-1/2" (64mm) 5008022
■■Cutting Board, 18" x 12" x 1/2" (457 x 305 x 13mm) BA-2358
■■Door Lock with ey L -22567
■■Drip Pan, 1" (25mm) deep PN-2122
■■Drip Tray - External 1007267
■■Legs, 6" (152mm), Flanged (SET OF FOUR) 5004863
HACCP Network Options (ELECTRONIC CONTROL ONLY)
REFER TO S ECIFICATION #9015 FOR A LICABLE ART NUMBERS
■■HACCP Documentation
■■HACCP with itchen Management
■■Probe, Internal Temperature (ELECTRONIC CONTROL)AVAILABLE
■■Shelf, Chrome Wire SH-2107
■■Shelf, Stainless Steel, Flat Wire SH-2326
I N S TA L L AT I O N R E Q U I R E M E N T S
This appliance must be installed level. It must not be
installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
WEIGHT EST.
500-S/TM 500-S/TMS
NET 129 lb (59 kg) 134 lb (61 kg)
SHI 180 lb (82 kg) 190 lb (86 kg)
1ST CARTON:41" X35" X35" (1041mm x 889mm x 889mm)
2ND CARTON:26" x 22" x 15" (660mm x 559mm x 381mm)
C L E A R A N C E R E Q U I R E M E N T S
3-inches (76mm) at the back, 2-inches (51mm) at the top,
1-inch (25mm) at both sides
15A-125V PLUG
NEMA 5-15P
20 AMP 125 VOLTS
PLUG, NEMA 5-20P
PLUG: NEMA 6-15P
15A, 250V
PLUG, CEE 7/7 (SCHUKO)
16 AMP 250V (#701410)
500-S/TMS
LOW TEMPERATURE HOT HOLDING CABINET
WITH CARVING SHELF