Alto-Shaam 10-18W User manual

10•18W
COMBIMATE®COMPANION HOLDING CABINET
WITH SLIDE-IN PAN RACK AND OPTIONAL RACK TROLLEY
DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.PRINTED IN U.S.A.#91 - 04/05
ITEM NO. _______________________
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone] FAX: [phone].329.8744 U.S.A. ONLY WEBSITE:
800.558.8744 U.S.A./CANADA 262.251.1907 INTERNATIONAL DIVISION www.alto-shaam.com
®
LISTED
COOKING APPLIANCE
584M
This holding cabinet features all stainless steel construction. The cabinet includes one (1) magnetic door
handle with positive latch. The cabinet is controlled with one (1) ON/OFF power switch; and an adjustable,
electronic thermostat which includes a heat indicator light, temperature set button, and temperature increase
and decrease buttons. The thermostat has a range of 60° to 200°F (16° to 93°C) and includes a digital display
indicating the air temperature within the cabinet.
Each holding cabinet is designed with one (1) removable interior Rack-Track (14582) which will accommodate
two different sizes of Slide-In-Pan-Racks. Slide-In-Pan-Rack (15638) with five (5) wire shelves is furnished
with each cabinet and will accommodate up to twenty (20) full-size, 2-1/2" (65mm) deep pans for hot food
holding. The Slide-In-Pan-Rack will also accept up to forty (40) 9-1/2" (441mm) diameter plates with covers.
■■MODEL 10•18W Combimate®Companion Holding Cabinet
ADDITIONAL FEATURES & OPTIONS
■■Optional Trolley Base Assembly
➥Mobilizes the Slide-In-Pan-Rack and is interchangeable with Combitherm®
Combination Oven/Steamer models 7•14, 10•10 and 10•18 for rethermalization,
and the model QC-40 Quickchiller.
➥Features a locking mechanism to secure the Slide-In-Pan-Rack to the trolley,
and includes two (2) rigid casters and two (2) swivel casters with brake.
●Left hand door swing is standard.
■■➥Specify right-hand door swing as a special order
●Since plates and plate covers vary in size, rack may not hold maximum quantity
of plated meals specified. Pans, plates, and plate covers are not included.
●HALO HEAT . . . a controlled, uniform heat source that gently holds and
surrounds food to provide a better appearance, taste, and longer
holding life.
●The Companion Holding Cabinet is furnished with a Slide-In-Pan-Rack for
use with an optional Trolley Base Assembly for full pan-rack mobility.
●Roll-In Rack is designed for maximum capacity and is completely
interchangeable with the Combitherm®Combination Oven/Steamer electric
model 7•14, 10•10 and 10•18, and the Alto-Shaam QuickchillerTM QC-40.
—Up to twenty full-size pans or ten sheet pans
—Accommodates European GN 1/1 and 2/1 pans
●Motionless air inside cabinet prevents transfer of flavors, retains more
product moisture, and preserves color.
●Close temperature tolerance, along with even heat distribution, maintains
an ideal serving temperature throughout the cabinet.
●Adjustable, electronic thermostat with digital display, to monitor inside
air temperature.
●Uses one-third to one-half the energy of conventional holding equipment.
●Non-magnetic stainless steel interior resists corrosion.
Model 10•18W and
Slide-In-Pan-Rack
SHOWN WITH OPTIONAL
RIGHT-HAND HINGING AND
TROLLEY BASE ASSEMBLY

DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.PRINTED IN U.S.A.
DIMENSIONS: H x W x D
EXTERIOR:
70-13/16" x 28-1/4" x 34-5/16" (1799mm x 718mm x 872mm)
INTERIOR:
30-1/4" x 23-1/2" x 30-1/8" (768mm x 597mm x 765mm)
PRODUCT\PAN CAPACITY
240 lbs (108 kg) MAXIMUM
VOLUME MAXIMUM: 150 QUARTS (190 LITERS)
FULL-SIZE PANS: Twenty (20) 20"x 12"x 2-1/2" MAXIMUM
GN 1/1: Twenty (20) (530mm x 325mm x 65mm)
GN 2/1: Ten (10) (650mm x 530mm x 65mm)
FULL-SIZE SHEET PANS: Five (5) 18"x 26"x 1" (10 with added shelves)
Slide-in Pan Rack (15638)
—Five (5) stainless steel wire shelves
—Ten (10) pan support rail positions
2-1/2" (64mm) vertical spacing between rails
21" (533mm) horizontal width between rails
For pan capacity with optional Slide-In-Pan-Racks, see specification sheet
for 10•10 or 7•14 Combitherm Combination Oven/Steamer.
CLEARANCE REQUIREMENTS
3-inches (76mm) at the back, 2-inches (51mm) at the top,
and 1-inch (25mm) at both sides
INSTALLATION REQUIREMENTS
Cabinet must be installed level. The oven must not be
installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
WEIGHT
10•18W w/optional trolley
NET 235 lb (107 kg) est. 280 lb (127kg)
SHIP 270 lb (122 kg) est. 385 lb (175kg)
CRATE 81" X35" X41" est.
DIMENSIONS: (2057mm x 889mm x 1041mm)
DOMESTIC SHIPMENTS ONLY
ELECTRICAL
VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG INCLUDED
at 208 1 50/60 13.2 2.8
at 240 1 50/60 15.4 3.7
at 230 1 50/60 14.7 3.4
#91 - 04/05
28-1/4" (718mm)
34-5/16" (872mm)
33-3/8" (848mm)
37-9/16" (954mm)
70-13/16" (1799mm)
ADJUSTABLE
®
Electrical
Connection
2-3/4" (70mm)
from top
C
L
28-1/8" (714mm)
30-1/8" (765mm) 32-3/4" (832mm)
59-5/16 " (1507mm)
(H x W x D)
10•18W
COMBIMATE®COMPANION HOLDING CABINET
WITH SLIDE-IN PAN RACK AND OPTIONAL RACK TROLLEY
NEMA 6-20P
20A - 250V PLUG
CEE 7/7
220-230V PLUG
OPTIONS & ACCESSORIES
Rack Track
■■Fits 7•14 & 10•18 Combitherm 14582
■■Fits 10•10 Combitherm 14940
■■Fits 10•10 Combitherm prior to 7/2000 14581
■■Trolley Base Assembly 15635
Slide-In-Pan Rack
■■Fits 7•14 Combitherm & QC-40 15639
■■Fits 10•10 Combitherm & QC-40 15637
■■Fits 10•18 Combitherm & QC-40 15638
Stainless Steel Wire Shelves
■■For Pan Rack 15638 and 15639 SH-22473
■■For Pan Rack 15637 SH-2903
W164 N9221 Water Street •PO Box 450 •Menomonee Falls, Wisconsin 53052-0450 •U.S.A.
PHONE: [phone] FAX: [phone].329.8744 U.S.A. ONLY WEBSITE:
800.558.8744 U.S.A./CANADA 262.251.1907 INTERNATIONAL DIVISION www.alto-shaam.com
®
230 208-240