Sizes and Specifications
COMPANION HOLDING CABINET features all stainless steel construction with two (2) window
doors. The cabinet includes two (2) magnetic door handles with positive latch. The cabinet is
controlled with one (1) ON/OFF power switch; and an adjustable, electronic thermostat which
includes a heat indicator light, temperature set button, and temperature increase and decrease
buttons. The thermostat has a range of 60°to 200°F (16°to 93°C) and includes a digital display
indicating the air temperature within the cabinet.
Each holding cabinet is furnished with one (1) Roll-In Pan Cart (trolley) which features removable
handle, pan support rails to hold full-size pans, and wire shelves for sheet pans. Cart includes two
(2) rigid casters and two (2) swivel casters with brake.
Model 20•20MW —is supported by four (4) heavy duty casters, 2 rigid and 2 swivel with brake,
for complete mobility both with and without the roll-in cart.
Model 20•20W —is supported by four (4) heavy duty equipment legs for stationary
installation.
MODEL
PRODUCT
CAPACITY
PAN
CAPACITY
INTERIOR
EXTERIOR
ELECTRICAL
NET WEIGHT
SHIP WEIGHT
OPTIONS &
ACCESSORIES
Up to approximately 480 lb (c. 218 kg)
TOTAL PAN VOLUME (maximum): 300 quarts (c. 285 liters)
FULL-SIZE PANS: 20" x 12" x 2-1/2"
—Forty (40) maximum
FULL-SIZE SHEET PANS: 18" x 26" x 1"
—Ten (10) with wire shelves furnished as standard
—Twenty (20) maximum with additional wire shelves
GASTRONORM PANS
—Forty (40) 530mm x 325mm x 65mm GN 1/1
—Twenty (20) 650mm x 530mm x 65mm GN 2/1
22 gauge non-magnetic (non-corrosive) stainless steel
INSIDE DIMENSIONS (W x D x H): 28-1/8" x 35" x 61"
(714mm x 889mm x 1549mm)
ROLL-IN PAN CART: (TROLLEY)
All stainless steel construction
—Twenty (20) pan support rail positions
2-5/8" (67mm) vertical spacing between rails
21-1/8" (537mm) horizontal width between rails
—Four (4) casters (2 rigid and 2 swivel with brake)
—One (1) removable push handle
—Ten (10) stainless steel wire shelves
22 gauge stainless steel exterior
—Outside Dimensions (W x D x H): 36-3/4" x 39-3/4" x 78-3/4"
(933mm x 1010mm x 2000mm)
—Door Window Dimensions (W x H): 4-7/16" x 22-7/16"
[each of two (2) windows] (113mm x 570mm)
208-240 V.A.C. —50/60 Hz, 1 ph
…At 208V —3000 Watts, 14.4 Amps
...At 220V —3400 Watts, 15.0 Amps
…At 240V —4000 Watts, 16.7 Amps
…At 230V —3500 Watts, 15.5 Amps
540 lb (245 kg) 535 lb (243 kg)
580 lb (263 kg) 575 lb (261 kg)
Preheat Sealing Strip.............................................................14598
Roll-In Pan Cart - QC-100 & 20•20 ..........................................5815
Roll-In Pan Cart - QC-100 & 20•20Gas ...................................55585
Roll-In Plate Cart Assembly - 20•20.....................................5003690
Roll-In Plate Cart Assembly - 20•20Gas................................5002622
Stainless Steel Wire Shelf
—To accommodate full-size sheet pans ..............................SH-22473
20•20MW 20•20W
