Alto-Shaam HFM-30 User manual

HFM-30
HFM-48
HFM-72
HOT FOOD MODULE
DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.PRINTED IN U.S.A.#09 - 09/06
ITEM NO. _______________________
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone] FAX: [phone] WEBSITE:
800.558.8744 U.S.A./CANADA 800.329.8744 U.S.A. ONLY www.alto-shaam.com
®
Exterior side panels of 18 gauge non-magnetic stainless steel. An ON/OFF thermostat control is
attached to the heated base with a 36" (914mm) flexible, water-tight extension for built-in
installations and can be mounted in a convenient location for the operator. The hot food module is
controlled by one (1) ON/OFF switch and one (1) adjustable thermostat with a range of 1 through 10
with one (1) indicator light. Customer supplied solid surface material insert provides a consistent,
even heat transfer to hot foods being held in direct contact with the heated top.
■■MODEL HFM-30 - 30 inches wide
■■MODEL HFM-48 - 48 inches wide
■■MODEL HFM-72 - 72 inches wide
● HALO HEAT . . . a controlled, uniform heat source that
radiates a gentle heat from the shelf base.
●Front-of-the-house use with an existing counter, overhead
lighting, and sneeze guard system, or drop into a prep table for
hot food plating convenience.
●Combine the beauty and durability of customer supplied solid
surface material for an impressive display of hot food products.
●Perfect for hot hors d’oeuvres or pizza.
●Easy drop-in installation design.
●Stainless steel exterior panels.
ADDITIONAL FEATURES & OPTIONS
■■Cutting Board BA-2054
ANSI/NSF 4

DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.PRINTED IN U.S.A.
DIMENSIONS: L x W x H
HFM-30 EXTERIOR: 30-5/8" x 24-5/8" x 4-7/16"
(778mm x 626mm x 113mm)
SURFACE MATERIAL: 28-3/8" x 22-3/8" x 3/4"
(721mm x 569mm x 19mm)
OPENING REQUIRED: 29" L x 23" W
(737mm x 584mm)
HFM-48 EXTERIOR: 48-5/8" x 24-5/8" x 4-7/16"
(1235mm x 626mm x 113mm)
SURFACE MATERIAL: 46-3/8" x 22-3/8" x 3/4"
(1178mm x 569mm x 19mm)
OPENING REQUIRED: 47" L x 23" W
(1194mm x 584mm)
HFM-72 EXTERIOR: 72-5/8" x 24-5/8" x 4-7/16"
(1845mm x 626mm x 113mm)
SURFACE MATERIAL: 70-3/8" x 22-3/8" x 3/4"
(1788mm x 569mm x 19mm)
OPENING REQUIRED: 71" L x 23" W
(1803mm x 584mm)
CLEARANCE REQUIREMENTS
6" (152mm) from bottom of appliance.
INSTALLATION REQUIREMENTS
Unit must be installed level. It must not be
installed in any area where it may be affected by
steam, grease, dripping water, high temperatures,
or any other severely adverse conditions.
Customer supplied solid surface material must be
rated to withstand temperatures at 200°F (93°C) or
above. Material must be 3/4" (19mm) thickness.
#09 - 09/06
29" (737mm)
30-5/8" (778mm)
24-5/8" (626mm)
47" (1194mm)
48-5/8" (1235mm)
24-5/8" (626mm)
71" (1803mm)
72-5/8" (1845mm)
24-5/8" (626mm)
4-7/16"
(113mm)
23" (584mm) OPENING REQUIRED
Flexible
w
ater-tight tether
30" (762mm)
Control
Flexible
water-tight tether
30" (762mm)
Control
Flexible
water-tight tether
30" (762mm)
Control
ELECTRICAL CONNECTION
60" (1524mm) cord
ELECTRICAL CONNECTION
60" (1524mm) cord
ELECTRICAL
CONNECTION
60" (1524mm)
cord
HFM-30, HFM-48, HFM-72
HOT FOOD MODULE
W164 N9221 Water Street •PO Box 450 •Menomonee Falls, Wisconsin 53052-0450 •U.S.A.
PHONE: [phone] FAX: [phone] WEBSITE:
800.558.8744 U.S.A./CANADA 800.329.8744 U.S.A. ONLY www.alto-shaam.com
®
ELECTRICAL
HFM-30
VOLTAGE PHASE CYCLE/HZ AMPS kW
208V 1 50/60 5.2 1.1 NEMA 6-15P
15A, 250V PLUG
230V 1 50/60 AVAILABLE UPON REQUEST
HFM-48
VOLTAGE PHASE CYCLE/HZ AMPS kW
208V 1 50/60 10.5 2.2 NEMA 6-15P
15A, 250V PLUG
230V 1 50/60 AVAILABLE UPON REQUEST
HFM-72
VOLTAGE PHASE CYCLE/HZ AMPS kW
208V 1 60 15.8 3.3 NEMA 6-20P
20A, 250V PLUG
230V 1 50/60 AVAILABLE UPON REQUEST
WEIGHT
HFM-30 HFM-48 HFM-72
NET (EST.) 45 lb (20 kg) 90 lb (41 kg) 135 lb (61 kg)
SHIP 75 lb (34 kg) 125 lb (57 kg) 175 lb (79 kg)
CRATE 13-1/2" X42" X30" 13-1/2" X61" X30" 13-1/2" X82" X30"
DIMENSIONS:(343 X1067 X762mm) (343 X1545 X762mm) (343 X2083 X762mm)
EST.EST.EST.
(H x W x D)
HFM-30
HFM-48
HFM-72