Alto-Shaam HALO HEAT TY2-72 SERIES User manual

TY2-72 SERIES
TY2SYS-72 SERIES
HEATED DISPLAY SYSTEMS
ITEM NO. _______________________
The display case is constructed of 18 gauge, non-magnetic stainless steel. A tempered glass front encloses the display case
and can be lifted to a 90 degree angle for easy cleaning. Removable, sliding glass doors on the operator side are included.
Sliding door tracks have a “clean sweep”cutout allowing for easy cleaning and crumb removal. Framed end glass with
rubber gasket material protects glass edges from chipping and breakage. The base is divided into two (2) individually
managed heat zones with each zone controlled by a separate thermostat with a range of 1 through 10 and heat-on indicator
light. Overhead lights are controlled by ON/OFF switches in two (2) light zones. Two (2) 125V plug outlets are available
as an option on 120/208-240V units only. Counter-top display cases include one set of 4" (102mm) legs.
■■TY2-72 - 72" (1829mm) length
■■TY2SYS-72 - 72" (1829mm) length, with base
■■TY2-72/P - 72" (1829mm) length, 71-5/16" (1811mm) self-service opening across full length of case front
■■TY2SYS-72/P - 72" (1829mm) length, with base, 71-5/16" (1811mm) self-service opening across full length of case front
■■TY2-72/PL - 72" (1829mm) length, 23-3/4" (603mm) self-service opening on left side of case front
■■TY2SYS-72/PL - 72" (1829mm) length, 23-3/4" (603mm) with base, self-service opening on left side of case front
■■TY2-72/P - 72" (1829mm) length, 23-3/4" (603mm) self-service opening on right side of case front
■■TY2SYS-72/P - 72" (1829mm) length, with base, 23-3/4" (603mm) self-service opening on right side of case front
● HA O HEAT … a controlled, uniform heat source that gently
holds and surrounds food for better appearance, taste, and
longer holding life.
● Holds and displays hot food fresh and moist for hours —
without adding water.
● Expandable system to meet your specific requirements.
● Matches profile of leading refrigerated display case.
● HOT DISPLAY CASE
— Curved glass styling.
— Displays hot food without condensation on glass.
— Thermostatically controlled heat source radiates from the
base of the display case in multiple heat zones.
— Overhead light zones with shatterproof coated bulbs.
— Holds a full range of standard (gastronorm) pan sizes, full-size
or half-size sheet pans.
— Tempered sliding glass doors reflect heat back into the products
and mirror the display to enhance merchandising effect.
●DECO ATO BASE
— Standard black painted front and end panels.
●SELF-SE VICE HOT DISPLAY
— Customer self-service opening is available on right side, left side,
or across the full length of case.
— Front mounted heat-guard provides customer protection.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone].558.8744 U.S.A./CANADA FAX: [phone].329.8744 U.S.A. ONLY
www.alto-shaam.com
P R I N T E D I N U .S.A.D U E T O O N G O I N G P R O D U C T D E V E O P M E N T, S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E . #55 - 03/08
TY2-72
TY2SYS-72
FACTORY INSTALLED OPTIONS
●The system base is not sold as a separate
item. Order the full TY2SYS model to
receive the base.
●Panel Color Choices
➥Specify color choice:
■■Black, standard
■■Stainless Steel, optional
■■Custom Color, optional
ANSI/NSF 4

TY2-72 SERIES
TY2SYS-72 SERIES
HEATED DISP LAY SYST EMS
DIMENSIONS (HXWXD)
EXTERIOR, COUNTER-TOP MODEL WITH LEGS:
33-11/16" x 72" x 49" (830mm x 1829mm x 1242mm)
EXTERIOR, WITH BASE:
52-3/16" x 72" x 51-5/16" (1325mm x 1829mm x 1304mm)
WELL DIMENSIONS (WXLXD):
27-3/16" x 69-5/16" x 4-1/2" (690mm x 1760mm x 114mm)
INSTALLATION REQUIREMENTS
Display case must be installed level. The display case must
not be installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
Do not install a heated display case near a cold air source
such as a freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
ELECTRICAL
CORD
96" (2438mm)
CUTTING BOARD IN “DOWN” POSITION CUTTING BOARD IN “DOWN” POSITION
6-3/4"
(172mm)
ON
OFF
ON
OFF
ON
OFF
52-3/16" (1325mm)
48" (1219mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
52-3/16" (1325mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
72" (1829mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
52-3/16" (1325mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
TY2SYS Side Profile
TY2SYS-72
TY2SYS-48
TY2SYS-96
29-5/8" (753mm)
39-1/2" (1004mm)
49" (1242mm)
33-11/16" (830mm)
11-1/2"
(293mm)
TY2 Side Profile
51-5/16" (1304mm)
41-7/16" (1053mm)
52-3/16" (1325mm)
31-3/16" (792mm)
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone].558.8744 U.S.A./CANADA FAX: [phone].329.8744 U.S.A. ONLY
www.alto-shaam.com
WEIGHT
MODEL NET SHIP
TY2-72 385 lb (175 kg) 600 lb (272 kg)
TY2SYS-72 621 lb (282 kg) 721 lb (327 kg)
TY2-72/P 360 lb (163 kg) 575 lb (261 kg)
TY2SYS-72/P 660 lb (299 kg) 760 lb (345 kg)
TY2-72/P ; /PR 435 lb (197 kg) 650 lb (295 kg)
TY2SYS-72/P ; /PR 700 lb (318 kg) 800 lb (363 kg)
C ATED DIMENSIONS (EST.): HXWXD
TY2-72: 45" x 85" x 55" (1143mm x 2159mm x 1397mm)
TY2SYS-72: 65" x 85" x 55" (1651mm x 2159mm x 1397mm)
ELECTRICAL
CORD
96" (2438mm)
CUTTING BOARD IN “DOWN” POSITION CUTTING BOARD IN “DOWN” POSITION
6-3/4"
(172mm)
ON
OFF
ON
OFF
ON
OFF
52-3/16" (1325mm)
48" (1219mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
52-3/16" (1325mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
72" (1829mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
52-3/16" (1325mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
TY2SYS Side Profile
TY2SYS-72
TY2SYS-48
TY2SYS-96
29-5/8" (753mm)
39-1/2" (1004mm)
49" (1242mm)
33-11/16" (830mm)
11-1/2"
(293mm)
TY2 Side Profile
51-5/16" (1304mm)
41-7/16" (1053mm)
52-3/16" (1325mm)
31-3/16" (792mm)
S P E C I F I C AT I O N S
●Ten (10) overhead lights with two (2) light zones.
●Two (2) base heat zones with two (2) adjustable thermostats with
a range of 1 through 10, and two (2) heat-on indicator lights.
●Three (3) tinted, reflective, tempered glass sliding doors on
operator side.
●One (1) 10" x 60" (254mm x 1524mm) operator-side work shelf.
●Self-serve model TY2-72/P has a self-serve pan insert
26-7/16" x 69-3/16" x 2" (672mm x 1757mm x 51mm) and
includes three (3) Wire Pan Grids.
●Self-serve models TY2-72/P and TY2-72/PR have a self-serve
pan insert 21-5/8" x 26-7/16" x 2" (549mm x 672mm x 51mm)
and includes one (1) Wire Pan Grid.
ELECTRICAL
CORD
96" (2438mm)
CUTTING BOARD IN “DOWN” POSITION CUTTING BOARD IN “DOWN” POSITION
6-3/4"
(172mm)
ON
OFF
ON
OFF
ON
OFF
52-3/16" (1325mm)
48" (1219mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
52-3/16" (1325mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
72" (1829mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
52-3/16" (1325mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
TY2SYS Side Profile
TY2SYS-72
TY2SYS-48
TY2SYS-96
29-5/8" (753mm)
39-1/2" (1004mm)
49" (1242mm)
33-11/16" (830mm)
11-1/2"
(293mm)
TY2 Side Profile
51-5/16" (1304mm)
41-7/16" (1053mm)
52-3/16" (1325mm)
31-3/16" (792mm)
TY2SYS-72
TY2SYS Profile
TY2 Profile
#55 - 03/08 D U E T O O N G O I N G P R O D U C T D E V E O P M E N T, S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A.
O P T I O N S & A C C E S S O R I E S
■■BUTTING KIT CONTACT FACTORY
■■CA VING STATION 5001874
■■GAUGE, INTE IO AMBIENT TEMP. GU-33384
■■GLASS, TEMPERED END PANE, BRONZE KIT 5008530
■■INDEPENDENT ELECT ICAL OUTLET 5001781
PANEL KIT, COUNTE TOP
■■B USHED STAINLESS STEEL 5004566
■■CUSTOM COLO 5004625
PANEL KIT, SYSTEM
■■B USHED STAINLESS STEEL 5004568
■■CUSTOM COLO 5004627
PANEL KIT, SYSTEM END PANEL
■■BLACK FO MICA EXTE IO 5004570
■■STAINLESS STEEL EXTE IO ,
POLISHED STAINLESS STEEL INTE IO 5004571
■■PAN INSE T, SELF-SE VICE 4" (102mm) DEEP 1001990
■■PLATFO M SCALE 55265
SHEET PAN DIVIDE BA PACKAGE
■■FULL-SER ICE & SELF-SER ICE FULL CASES 5002803
■■SELF-SER ICE LEFT-SIDE OR RIGHT-SIDE OF CASES 5002804
■■TEMPERATURE PROBE 5004917
■■THERMOSTAT GUARD CO ER PLATE 5007660
■■WORK SHELF WITH GRA Y LANE 5005639
E L E C T R I C A L
VOLTAGE PHASE CYCLE/HZ AMPS kW
120/208-240 (UL)1 50/60 18.75 4.5
t 208 1 50/60 19.0 4.6
t 240 1 50/60 19.0 4.6
230 (CE)1 50/60 18.3 4.2
230 1 50/60 18.4 4.2
Tyler Huss.eps
revised 5/30/02
added L14-20P Plug Configuration
NEMA L14-30P
30A, 250V PLUG
BARE END, NO PLUG
PA N C O N F I G U R AT I O N *
PAN SIZE DIMENSIONS QTY.
FULL-SIZE & ONE-HIRD**: 12" X20" X2-1/2" (GN 1/1) 5
12" X6" X2-1/2" (GN 1/3) 5
HALF-SIZE & ONE-HIRD**: 12" X10" X2-1/2" (GN 1/2) 10
12" X6" X2-1/2" (GN 1/3) 5
FULL-SIZE SHEE PANS: 18" X26" X1" 3
MAX. CAPACITY/VOLUME:80 lbs (36 kg)
50 qts (60 L)
* Pans are not included with display case.
** Will also accept 4" (100mm) deep pans.