Alto-Shaam CombiMate 12-20MW User manual

D U E T O O N G O I N G P R O D U C T D E V E L O P M E N T,S P E C I F I C AT I O N S A R E S U B E C T TO C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A. #92 - 7/07
ITEM NO. _______________________
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • .S.A.
PHONE: [phone] FAX: [phone] WEBSITE:
800.558.8744 .S.A./ CANADA 800.329.8744 .S.A.ONLY www.alto-shaam.com
®
FACTORY INSTALLED OPTIONS:
●Left hand door swing is standard.
■■➥Specify right-hand door swing as a
special order.
SPECIAL INFORMATION:
●When ordering, indicate complete
model number.
●Pans, plates, and plate covers are
not included.
●HALO HEAT . . . a controlled, uniform heat source that gently
holds and surrounds food to provide a better appearance, taste,
and longer holding life.
●Roll-In Pan Rack (trolley) is designed for maximum capacity and is
completely interchangeable with the Combitherm®Combination
Oven/Steamer electric model 12•20, or gas model 10•20, and the
Alto-Shaam QuickchillerTM QC-50.
— Up to twenty-four full-size pans or twelve sheet pans
— Accommodates European GN 1/1 and 2/1 pans
●Motionless air inside cabinet prevents transfer of flavors, retains more
product moisture, and preserves color.
●Close temperature tolerance, along with even heat distribution,
maintains an ideal serving temperature throughout the cabinet.
●Uses one-third to one-half the energy of conventional holding
equipment.
●Non-magnetic stainless steel interior resists corrosion.
The CombiMate®holding cabinet features 20 gauge stainless steel construction with a window door. The
cabinet is controlled with one (1) ON/OFF power switch; and an adjustable, electronic thermostat which
includes a heat indicator light, temperature set button, and temperature increase and decrease buttons. The
thermostat has a range of 60° to 200°F (16° to 93°C) and includes a digital display indicating the air
temperature within the cabinet. The door has a heavy duty rotary handle.
Each holding cabinet includes one (1) Roll-In Pan Cart (trolley) which features removable handle, pan support
rails to hold full-size pans, and six (6) stainless steel wire shelves for sheet pans. Cart includes two (2) rigid
casters and two (2) swivel casters with brake.
■■MODEL 12•20MW: CombiMate®Companion Holding Cabinet, supported by four (4) heavy duty casters,
2 rigid and 2 swivel with brake.
■■MODEL 12•20W: CombiMate®Companion Holding Cabinet, supported by four (4) heavy duty equipment legs.
12•20MW, 12•20W
COMPANION HOLDING CABINET
WITH ROLL-IN CART
12•20MW

D U E T O O N G O I N G P R O D U C T D E V E L O P M E N T , S P E C I F I C A T I O N S A R E S U B E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A.
D I M E N S I O N S : H x W x D
EXTERIOR:
57" x 36-3/4" x 39-3/4" (1448mm x 933mm x 1010mm)
INTERIOR:
39" x 28-1/8" x 35" (991mm x 714mm x 889mm)
P R O D U C T \ PA N C A PA C I T Y
288 lb (132 kg) MAXIMUM
VOLUME MAXIMUM: 180 QUARTS (228 LITERS)
FULL-SIZE PANS: Twenty-four (24) 20" x 12" x 2-1/2" MAXIMUM
GN 1/1: Twenty-four (24) (530mm x 325mm x 65mm)
GN 2/1: Twelve (12) (650mm x 530mm x 65mm)
FULL-SIZE SHEET PANS: Six (6) 18" x 26" x 1"
(12 with added shelves)
Roll-in Pan Cart
—Six (6) stainless steel wire shelves
—Two (2) pan support rail positions
2-5/8" (67mm) vertical spacing between rails,
21-1/8" (537mm) horizontal width between rails
CLEARANCE REQUIREMENTS
3-inches (76mm) at the back, 2-inches (51mm) at the top,
and 1-inch (25mm) at both sides
INSTALLATION REQUIREMENTS
Cabinet must be installed level. It must not be installed in
any area where it may be affected by steam, grease,
dripping water, high temperatures, or any other severely
adverse conditions.
WEIGHT
12•20MW with cart 12•20W with cart
NET 405 lb (183kg) 410 lb (186kg)
SHIP 460 lb (207kg) 465 lb (210kg)
CARTON 67" X42" X45"
DIMENSIONS:(1701mm x 1067mm x 1143mm)
ELECTRICAL
VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG INCLUDED
at 208 1 50/60 14.4 3.0
at 240 1 50/60 16.2 3.9
at 230 1 50 14.8 3.4
#92 - 7/07
36-3/4" (933mm)
70-5/8"(1794mm)
ELECTRICAL
CONNECTION
2-5/8" (67mm)
From Top
3-1/2" (89mm)
32-7/8" (832mm)
46-1/2"(1181mm)
50-1/2"(1282mm)
30-5/16" (770mm)
24-1/8"
(617mm)
31-15/16" (811mm)
29-1/2" (749mm)
..
C
L
39-3/4"(1010mm)
57"(1448mm)
10-1/2" (267mm)
WITH CASTERS OR LEGS
ALTO-SHAAM
(H x W x D)
12•20MW, 12•20W
COMPANION HOLDING CABINET
WITH TROLLEY
NEMA 6-20P
20A - 250V PLUG
CEE 7/7
220-230V PLUG
O P T I O N S & A C C E S S O R I E S
■■Preheat Sealing Strip 14598
■■Roll-in Pan Cart, QC-50 & 12•20 5814
■■Roll-in Pan Cart, QC-50 & 10•20 Gas 55619
■■Stainless Steel Wire Shelves SH-22473
TO A C C O MM ODA TE FU L L -SI ZE SH E ET PA N S
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • .S.A.
PHONE: [phone] FAX: [phone] WEBSITE:
800.558.8744 .S.A./ CANADA 800.329.8744 .S.A. ONLY www.alto-shaam.com
®
230 208-240