Altrad BELLE MINIMIX 150E+ User manual

1
870/00021/0
04/23
Operators Manual
GB
BELLE
MINIMIX 150E+
6
UKCA Declaration of Conformity
2
EC/EU Declaration of Conformity
UKCA Declaration of Incorporation
EC/EU Declaration of Incorporation
3 - 7
3
4
5

2
PRODUCT TYPE .........
MODEL.........................
SERIAL No...................
DATE OF MANUFACTURE
SOUND POWER LEVEL
MEASURED /
....................(GUARANTEED)
WEIGHT.......................
We, Altrad Belle, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB declare that the
DoC is issued under our sole responsibility and belongs to the followings product(s):
Declaration Of Conformity (DOC)
Managing Director
On behalf of Altrad Belle
Sheen, Derbyshire, UK
Ray Neilson
Signed by:
867/00005/0
Object of the Declaration:
Battery powered portable, professional ‘Tip-Up’ style cement mixer for mixing concrete and mortar.
The object of the declaration described above is in conformity with the relevant Statutory
Requirements:
- 2008 No. 1597 Supply of Machinery (Safety) Regulations 2008
- 2001 No. 1701 Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001
- 2016 No. 1091 Electromagnetic Compatibility Regulations 2016
The following designated standards and technical specifications have been applied:
- EN ISO 12100:2010 Safety of machinery
- EN 61029-1:2009 Safety of transportable motor-operated electric tools.
- ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy
levels of noise sources using sound pressure
Technical Files are held by Ray Neilson at the Altrad Belle address stated above:-
Place of Declaration:-
Sheen,
Nr. Buxton,
Derbyshire,
SK17 0EU,
UK
Date of Declaration:-
December 2022
PRODUCT TYPE .....................
MODEL.....................................
SERIAL No...............................
DATE OF MANUFACTURE .....
SOUND POWER LEVEL
MEASURED /
....................(GUARANTEED)
WEIGHT...................................
PRODUCT TYPE .....................
MODEL.....................................
SERIAL No...............................
DATE OF MANUFACTURE .....
SOUND POWER LEVEL
MEASURED /
....................(GUARANTEED)
WEIGHT...................................
EC Declaration Of Conformity (DOC)
We, Altrad Belle, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB declare that the DoC is issued under
our sole responsibility and belongs to the followings product(s):
866/00005/0_GB
GB GB
Object of the Declaration:
Battery powered portable, professional ‘Tip-Up’ style cement mixer for mixing concrete and mortar.
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
- 2006/42/EC - New machinery directive - 2000/14/EC - Noise - equipment for use outdoors
The following harmonised standards and technical specifications have been applied:
- EN ISO 12100:2010 Safety of machinery
- EN 61029-1:2009 Safety of transportable motor-operated electric tools.
- ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy
levels of noise sources using sound pressure
Technical Files are held by Hugues Menager at the following address:-
Altrad (Group Holding), 125 Rue du Mas Carbonnier, 34000, Montpellier, France.
Managing Director
On behalf of Altrad Belle, Sheen, Derbyshire, UK
Ray Neilson
Signed by:
Place of Declaration:-
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, UK
Date of Declaration:-
December 2022
EU Declaration Of Conformity (DOC)
We, Altrad Belle, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB declare that the DoC is issued under
our sole responsibility and belongs to the followings product(s):
GB GB
Object of the Declaration:
Battery powered portable, professional ‘Tip-Up’ style cement mixer for mixing concrete and mortar.
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
- 2014/30/EU - EMC Directive - 2011/65/EU - Restriction of Hazardous Substances Directive
The following harmonised standards and technical specifications have been applied:
- EN ISO 12100:2010 Safety of machinery
- EN 61029-1:2009 Safety of transportable motor-operated electric tools.
- ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy
levels of noise sources using sound pressure
Technical Files are held by Hugues Menager at the following address:-
Altrad (Group Holding), 125 Rue du Mas Carbonnier, 34000, Montpellier, France.
Managing Director
On behalf of Altrad Belle, Sheen, Derbyshire, UK
Ray Neilson
Signed by:
Place of Declaration:-
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, UK
Date of Declaration:-
December 2022
See information
on sticker above

3
PRODUCT TYPE .....................
MODEL.....................................
SERIAL No...............................
DATE OF MANUFACTURE .....
SOUND POWER LEVEL
MEASURED /
....................(GUARANTEED)
WEIGHT...................................
PRODUCT TYPE .....................
MODEL.....................................
SERIAL No...............................
DATE OF MANUFACTURE .....
SOUND POWER LEVEL
MEASURED /
....................(GUARANTEED)
WEIGHT...................................
EC Declaration Of Conformity (DOC)
We, Altrad Belle, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB declare that the DoC is issued under
our sole responsibility and belongs to the followings product(s):
866/00005/0_GB
GB GB
Object of the Declaration:
Battery powered portable, professional ‘Tip-Up’ style cement mixer for mixing concrete and mortar.
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
- 2006/42/EC - New machinery directive - 2000/14/EC - Noise - equipment for use outdoors
The following harmonised standards and technical specifications have been applied:
- EN ISO 12100:2010 Safety of machinery
- EN 61029-1:2009 Safety of transportable motor-operated electric tools.
- ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy
levels of noise sources using sound pressure
Technical Files are held by Hugues Menager at the following address:-
Altrad (Group Holding), 125 Rue du Mas Carbonnier, 34000, Montpellier, France.
Managing Director
On behalf of Altrad Belle, Sheen, Derbyshire, UK
Ray Neilson
Signed by:
Place of Declaration:-
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, UK
Date of Declaration:-
December 2022
EU Declaration Of Conformity (DOC)
We, Altrad Belle, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB declare that the DoC is issued under
our sole responsibility and belongs to the followings product(s):
GB GB
Object of the Declaration:
Battery powered portable, professional ‘Tip-Up’ style cement mixer for mixing concrete and mortar.
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
- 2014/30/EU - EMC Directive - 2011/65/EU - Restriction of Hazardous Substances Directive
The following harmonised standards and technical specifications have been applied:
- EN ISO 12100:2010 Safety of machinery
- EN 61029-1:2009 Safety of transportable motor-operated electric tools.
- ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy
levels of noise sources using sound pressure
Technical Files are held by Hugues Menager at the following address:-
Altrad (Group Holding), 125 Rue du Mas Carbonnier, 34000, Montpellier, France.
Managing Director
On behalf of Altrad Belle, Sheen, Derbyshire, UK
Ray Neilson
Signed by:
Place of Declaration:-
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, UK
Date of Declaration:-
December 2022
See information
on sticker above

4
UKCA Declaration Of Incorporation of
Partly Completed Machinery
We,
Company Name: Altrad Belle
Postal address: Sheen, nr. Buxton, Derbyshire
Postcode: SK17 0EU
Telephone number: [phone]
E-Mail address: [email protected]
Declare that this DOC is issued under the sole responsibility of the manufacturer.
Apparatus model/product: Battery Power Head
Type: 82v 1.5kW Li-Ion
Serial Number(s): 101 YYMMDD 0000001 to 101 YYMMDD 9999999
I hereby declare that the partly completed equipment named above in its conception, construction
and form put by us on the market:
• MUST NOT BE PUT INTO SERVICE WITHIN THE UK UNTIL THE FINAL MACHINERY INTO WHICH
IT IS TO BE INCORPORATED HAS BEEN DECLARED IN CONFORMITY WITH THE SUPPLY OF
MACHINERY (SAFETY) REGULATIONS 2008 DIRECTIVE (2008 No. 1597) AND ALL OTHER
APPLICABLE UKCA DIRECTIVES
• Is designed and constructed solely as a non-functional component to be incorporated into a machine
requiring completion
• Is in conformity with the relevant Essential Health and Safety Requirements of the UKCA Supply of
Machinery (Safety) Regulations 2008 (1597/2008) shown overleaf and other directives listed overleaf
The relevant technical documentation is in accordance with the provisions of part B of Annex VII of the
machinery directive and is the responsibility of the signatory below. All relevant information about the
partly completed machinery will be provided, by email, on a reasoned request by the appropriate
national authority.
The name and address of the representative authorised to compile the relevant technical documentation is:-
Ray Neilson
Altrad Belle, Sheen, nr. Buxton, Derbyshire, SK17 0EU, UK.
867/90003/0
GB GB
Ray Neilson
Managing Director
On behalf of Altrad Belle, Sheen, Derbyshire, UK
Place of Declaration:-
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, UK
Date of Declaration:-
December 2022
Signed by:

5
CE Declaration Of Incorporation of
Partly Completed Machinery
We,
Company Name: Altrad Belle
Postal address: Sheen, nr. Buxton, Derbyshire
Postcode: SK17 0EU
Telephone number: [phone]
E-Mail address: [email protected]
Declare that this DOC is issued under the sole responsibility of the manufacturer.
Apparatus model/product: Battery Power Head
Type: 82v 1.5kW Li-Ion
Serial Number(s): 101 YYMMDD 0000001 to 101 YYMMDD 9999999
I hereby declare that the partly completed equipment named above in its conception, construction
and form put by us on the market:
• MUST NOT BE PUT INTO SERVICE WITHIN THE EU UNTIL THE FINAL MACHINERY INTO WHICH
IT IS TO BE INCORPORATED HAS BEEN DECLARED IN CONFORMITY WITH THE MACHINERY
DIRECTIVE (2006/42/EC) AND ALL OTHER APPLICABLE EU DIRECTIVES
• Is designed and constructed solely as a non-functional component to be incorporated into a machine
requiring completion
• Is in conformity with the relevant Essential Health and Safety Requirements of the EC Machinery
Directive (2006/42/EC) shown overleaf and other directives listed overleaf
The relevant technical documentation is in accordance with the provisions of part B of Annex VII of the
machinery directive and is the responsibility of the signatory below. All relevant information about the
partly completed machinery will be provided, by email, on a reasoned request by the appropriate
national authority.
The name and address of the representative authorised to compile the relevant technical documentation is:-
Hugues Menager
Altrad (Group Holding), 125 Rue du Mas Carbonnier, 34000, Montpellier, France.
866/90003/0_GB
GB GB
Ray Neilson
Managing Director
On behalf of Altrad Belle, Sheen, Derbyshire, UK
Place of Declaration:-
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, UK
Date of Declaration:-
December 2022
Signed by:

6
Contents
GB
CONTENTS PAGE NUMBER
UKCA DECLARATION OF CONFORMITY .............................................................................................................................................. 2
EC/EU DECLARATION OF CONFORMITY ............................................................................................................................................. 3
UKCA DECLARATION OF INCORPORATION ........................................................................................................................................ 4
EC/EU DECLARATION OF INCORPORATION ....................................................................................................................................... 5
INTRODUCTION....................................................................................................................................................................................... 7
WARNING ...................................................................................................................................................................................... 7
Serial Numbers............................................................................................................................................................................... 8
MACHINE DESCRIPTION
General........................................................................................................................................................................................... 8
Standard Operation........................................................................................................................................................................ 8
Danger Zone .................................................................................................................................................................................. 8
Main Components Locations.......................................................................................................................................................... 9
Power Unit Components .............................................................................................................................................................. 10
Battery Pack Components............................................................................................................................................................ 10
Battery Charger.............................................................................................................................................................................11
TECHNICAL DATA
Static Dimensions......................................................................................................................................................................... 12
General Data................................................................................................................................................................................ 13
Battery Pack Data ........................................................................................................................................................................ 13
Battery Charger Data ................................................................................................................................................................... 13
SAFETY INSTRUCTIONS
General......................................................................................................................................................................................... 14
Pre-Start Checks.......................................................................................................................................................................... 14
Residual Risks.............................................................................................................................................................................. 14
Worksites...................................................................................................................................................................................... 14
Operating the Machine................................................................................................................................................................. 15
Battery Charger............................................................................................................................................................................ 16
Battery Pack................................................................................................................................................................................. 17
Weather Conditions...................................................................................................................................................................... 17
During Maintenance ..................................................................................................................................................................... 17
After Maintenance ........................................................................................................................................................................ 17
 Modications&ReplacementParts ............................................................................................................................................. 17
Safety Decals ........................................................................................................................................................................ 18 - 20
OPERATING INSTRUCTIONS
Mixer Assembly Instructions......................................................................................................................................................... 21
Stand Assembly Instructions ........................................................................................................................................................ 22
Charging the Battery Pack ........................................................................................................................................................... 23
Inserting the Battery Pack ............................................................................................................................................................ 23
Emergency Stop........................................................................................................................................................................... 23
Stopping the Power Unit............................................................................................................................................................... 23
Starting the Power Unit ................................................................................................................................................................ 23
Removing the Battery Pack.......................................................................................................................................................... 24
Check the Charge Level of the Battery Pack ............................................................................................................................... 24
Battery Charging .......................................................................................................................................................................... 24
 Loading&Unloading.................................................................................................................................................................... 25
Operating the Mixer...................................................................................................................................................................... 25
STORAGE............................................................................................................................................................................................... 26
SERVICE AND MAINTENANCE
General......................................................................................................................................................................................... 27
Cleaning ....................................................................................................................................................................................... 27
TROUBLESHOOTING GUIDE
 PowerUnit&Operation................................................................................................................................................................ 28
 BatteryPack&Charger................................................................................................................................................................ 28
WIRING DIAGRAM................................................................................................................................................................................. 29
ENVIRONMENT...................................................................................................................................................................................... 30
REPLACEMENT PARTS ........................................................................................................................................................................ 30
WARRANTY............................................................................................................................................................................................ 31

7
Introduction
GB
Thepurposeofthispublicationistoenabletheowner/operatortomaintainandusethemachinee󰀩ciently.Iftheseinstructionsare
followedcarefullytheywillcontributetoyearsofe󰀩cientandprotableoperationofthemachinesinthetrueAltradBelletradition.
Thevariationsinoperatingconditionsmakeitimpossibleforthecompanytomakecomprehensiveordenitestatementsinits
publications regarding performance and methods of use of its machines, or to accept any liability for any loss or damage which
may result from these statements, or from any errors or omissions.
When replacements are required, insist on genuine Altrad Belle parts, as extensive damage is liable to result from the use of inferior
quality parts.
Inaccordancewiththecompany’spolicyofcontinuousimprovementtoitsmachines,alterationtothespecicationsofmachinesmay
be made at any time without notice and the company accepts no responsibility for any discrepancies which may occur between
thespecicationsofitsmachinesandthedescriptionsthereofcontainedinthispublications.
Thismanualhasbeenwrittentoincludeallfactoryttedoptionsandspecicationsforworld-wideuse,butthisdoesnotimplythatallor
anyoftheseareincludedinthestandardmachineconguration.ThereforelocalAltradBelleDealer’smustalwaysbeconsultedabout
machinespecications.
This manual may not in part, or in whole, be copied, photocopied, reproduced, translated, or converted to any electronic or machine
readable form without written consent of Altrad Belle.
Directives with regard to the notations.
Text in this manual to which special attention must be paid are shown in the following way:
The product can be at risk. The machine or yourself can be damaged or injured if procedures are not
carried out in the correct way.
CAUTION
The life of the operator can be at risk.
WARNING
Before you operate or carry out any maintenance on this machine YOU MUST READ and STUDY
this manual.
WARNING
WARNING
GB
KNOW how to safely use the unit’s controls and what you must do for safe maintenance. (NB Be sure that you know how to switch the
machineo󰀨beforeyouswitchon,incaseyougetintodi󰀩culty.)
ALWAYS wear or use the proper safety items required for your personal protection. If you have ANY QUESTIONS about the safe use
or maintenance of this unit, ASK YOUR SUPERVISOR OR CONTACT: Altrad Belle (UK):+44(0)129884606
Altrad Belle reserves the right to change machine specication without prior notice or obligation.

8
Serial Numbers
GB
ENSURE you make a note of the serial numbers of your machine, power unit and accessories and always quote them in any
communication with Altrad Belle or one of our dealers.
RefertotheMachineDescriptionsectionofthismanualtondthelocationsofeachoftheserialnumbersontheitems.
A - MACHINE SERIAL NUMBER
B - POWER UNIT SERIAL NUMBER
Machine Description
GB
GENERAL
Heavy duty tip-up mixer with an emission free, Li-ion battery powered motor for all your mixing requirements, outdoor usage,
indoorusageandpoorlyventilatedareas.TheMinimix150E+canbeusedonoro󰀨itsstandandistheidealportableandrobust
solutionformixingconcrete&mortarbutwithoutanyengineemissionsortheneedforanelectricalpowersupply...Building a
Sustainable Future!
STANDARD OPERATION
The machine is intended to be used for the following, in safe environmental conditions as described in this manual.
Any other use is not deemed suitable for this machine. Altrad Belle will not be liable for any damage or injury resulting from any use
other than outlined above. The operator will be liable.
Anyunauthorisedmodicationsorattachmentsareprohibited.Theymaya󰀨ecttheperformanceandsafetyofthemachine,potentially
resulting in damage to the machine or injury to the operator.
Useofnon-genuinereplacementpartsmayalsoa󰀨ecttheperformanceandsafetyofthemachine.potentiallyresultingindamageto
the machine or injury to the operator.
DANGER ZONE
The danger zone is the area around the machine in which persons are endangered during standard operation as outlined above.
Duringoperationofthemachine,cordono󰀨theworkareaandkeepmembersofthepublicandunauthorizedpersonnelatasafe
distance away from the danger zone.
C - BATTERY PACK SERIAL NUMBER
D - CHARGER SERIAL NUMBER

9
Machine Description
GB
MAIN COMPONENT LOCATIONS
www.Altrad-Belle.com
Tel: [phone]
Fax: [phone]
MADE IN THE
UNITED KINGDOM BY:
Altrad Belle Ltd.
Sheen, Nr. Buxton, SK17 0EU
SERIAL No.:
MODEL CODE:
MODEL YEAR:
WEIGHT:
A
B
C
D
E
G
H
F
L
J
K
M
A. PowerUnit(seepage10).
B. ONButton(Green).
C. OFFButton(Red).
D. Tip Handles.
E. Top Cover Lid.
F. Mixing Drum.
G. Stand Assembly Clip.
H. PivotStandTop(with360°rotation).
J. Stand Base.
K. Wheels.
L. Belt Guard
M. Gearbox
N. Serial Label
N

10
Machine Description
GB
POWER UNIT COMPONENTS
BATTERY PACK COMPONENTS
A. Battery Pack Compartment.
B. Battery Pack Compartment Lid.
C. Isolator Key.
D. Battery Retaining Latch.
E. Serial Label
F. Air Vent Intake
A
B
C
A. Battery Charge Level Button.
B. Battery Charge Level Display.
C. Serial Label.
D. Battery Caution / Over Temperature Indicator
BA
E
C
D
F
D

11
2
1
F 8A
Before charging, read the instructions.
For indoor use.
Made in P.R.C
GLOBGRO AB
Globe Group Europe
Riggaregatan 53 211 13 Malmö, Sweden
Garden Equipment Ltd
First Floor, 3a Groveley Road,
Christchurch, Dorset,
BH23 3HB, UK
S/N:
Model: 82C2
ERP: 2901786
OUTPUT: 82V 8A
INPUT: 230V ~ 50Hz/60Hz, 8A
A. Battery Pack Charging Dock
B. AC Power Cable Socket
C. Dock Indicator 1
D. Dock Indicator 2
E. BatteryisCharging(BlinkingGreen)
F. BatteryisFullyCharged(SolidGreen)
G. BatteryOverTemperature(BlinkingRed)
H. Battery/ChargingFault.(SolidRed)
J. Serial Label
Machine Description
GB
BATTERY CHARGER
A
B
FE
A
A
A
C D G H
J

12
Technical Data
GB
STATIC DIMENSIONS
597mm 1211mm
1057mm 1227mm
890mm
1432mm

13
Model MINIMIX 150E+
Motor Power (Hp / kW) 2.0 / 1.5
Max. Drum Capacity (Ltr) 130
Max. Mixing Capacity (Ltr) 90
Mixing Output per Charge (m3)2.0
*Weight (Kg) 59
Stand Weight (Kg) 9.5
Noise Level (dB(A)) 84
Model Battery
Model Code OPM/14/FIO
Battery Type Li-Ion
Weight (kg) 2.8
Dimensions L x W x H (mm) 120 x 90 x 214
Max. Voltage (v) 82
Nominal Voltage (v) 72
Energy Rating (Wh) 360
Energy Capacity (Ah) 5
80% Charge Time (Mins) 28
100% Charge Time (Mins) 39
Model Battery Charger
Model Code OPM/16/FIO
Dimensions LxWxH (mm) 230 x 170 x 170
Weight (kg) 2.0
Input Voltage AC (v) 230v
Input Frequency (Hz) 50 / 60
Output voltage DC (v) 82
Output current (A) 8
Technical Data
GB
GENERAL DATA
BATTERY
BATTERY CHARGER

14
Safety Instructions
GB
Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
WARNING
GENERAL SAFETY
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the machine, consult your supervisor or Altrad Belle.
This machine is designed to eliminate the possible risks arising from the use of it. However, risks DO reside, and these residual risks
are not clearly recognizable, and may cause personal injury or property damage, and possible death. If such unpredictable and
unrecognizable risks become apparent, the machine must be stopped immediately, and the operator or their supervisor must take
appropriate measures to eliminate such risks. It is sometimes necessary that the manufacturer must be informed of such an event for
future counter measures.
ALWAYS keep the Operator’s Manual and any other manuals that accompany this machine to hand. Immediately replace any
manuals that may have been lost or are now illegible.
PRE-START CHECKS
The following Pre-start-up inspection must be performed before the start of each work session or after every four hours of use,
whicheverisrst.Pleaserefertotheservicesectionfordetailedguidance.Ifanyfaultisdiscovered,themachinemustnotbeused
untilthefaultisrectied.
1. Thoroughly inspect the machine for signs of damage. Check components are present and secure.
2. ENSURE all packaging material has been removed before operating.
3. ENSURE there is no debris or excessive dirt present on the machine.
4DO replace any worn/damaged warning decals.
5. ENSURE the battery pack is securely inserted into the power unit.
6. ENSUREthebatterypackissu󰀩cientlycharged.
7. DO NOTusethebatteryifitshowssignsofdamage/wearorifitisleakinguid.Inthiscaseplacethebatteryinasecurelocation
 awayfromammablematerialsandarrangeforsafedisposal
Once all the above checks have been made, test run the machine checking that all switches function correctly and all indicators light
when the power unit is turned on.
RESIDUAL RISKS
The following risks are inherent to the use of the cement mixer.
• Injuries from touching the rotating drum or paddles
• Riskoftrappingngerswhilstassemblingorsettingthemachineontooro󰀨itsstand.Similarrisksremainwhenclosingany
protective covers and when inserting or removing the battery.
• Health hazards caused by breathing cement dust, during the loading of the drum.
• Risk of injuries due to ‘mix spatters’ being projected during operation, loading and unloading the mixing drum.
• Risk of injuries during lifting operations.
• Risk of fatigue injuries during prolonged loading of the mixer.
WORKSITES
• ENSURE the operator is familiar with the working surroundings. Worksites can be hazardous.
• ALWAYS keep the work area tidy and clear of any obstructions that may lead to accidents and/or injuries.
• Cordono󰀨theworkareaandkeepmembersofthepublicandunauthorizedpersonnelatasafedistance.
• This machine is heavy and must not be lifted single-handedly, either GET HELP or use suitable lifting equipment.

15
Safety Instructions
GB
OPERATING THE MACHINE
• DO NOTuseinadverselywetconditionsorinthepresenceofammableliquidsorgases.
• DO NOT let children come into contact with this mixer. Supervision is required when inexperienced operators use this mixer.
• Check condition of the battery housing. Ensure that there is no residual moisture or water lying in the housing. If so remove this
before inserting the battery.
• Check the battery terminals are in order and not bent, damaged or heavily corroded. If they are DO NOT use the mixer.
• Check for visible damage to the switch and housing. If damaged DO NOT operate the mixer and arrange for repair.
• Checkallguards&coversarettedcorrectlyandingoodcondition.DO NOToperateifthesearenotttedordamaged.
• ENSURE the operator has had adequate training prior to use, is familiar with all controls and knows how to safely switch the
machine OFF before it is switched ONincaseyougetintodi󰀩culty.
• Suitable PPE MUST be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe
 cappedfootwear(withanti-slipsolesforaddedprotection).Wearclothingsuitablefortheworkyouaredoingand DO NOT wear
loose jewellery that could be caught in moving parts.
• ALWAYS inform colleagues of what you will be doing and where you will be working.
• DO NOToperatethemachinewhenyouareill,feelingtired,orwhenundertheinuenceofdrugs/alcohol.
• NEVER leave the mixer running and unattended.
•ALWAYS ensure mixer is on level ground before mixing.
•DO NOT tip the mixer onto the drum mouth when motor is running.
• NEVER place any part of your body or your shovel into the drum whilst the motor is running.
• NEVERremoveortamperwithanyguardstted,theyarethereforyourprotection.Alwayscheckguardsforconditionand
security, if any are damaged or missing, DO NOT USE THE MACHINE until the guard has been replaced or repaired.
• ENSURE extra care is taken when working near to banks or trenches where there is a danger of the material collapsing.
•Ifyouhavetoturno󰀨themixerinaemergencyyoumustTURN OFF at switch.
•Ifyourmixercatchesre,useadrypowderorC02reextinguishertoputoutthere.Iftherecannotbeputout,keepaway
 andcalltherebrigade.Ifyouareinanydoubtaboutthesafetyconditionofyourmachine,pleasecontactAltradBelleoryour
local authorised dealer.
Young Children and the Inrm
• Thismixerisnotintendedforusebyyoungchildrenorinrmpersonswithoutsupervision.
• Thismixerisnotintendedforusebypersons(includingchildren)su󰀨eringfromdiminishedphysical,sensoryormentalabilities;
lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never
be left alone with this machine
When Operating the Mixer
• Keepunauthorisedpersons&animalsawayfromthemixingdrum
• DO NOT use the battery charger outdoors
• DO only use the approved batteries to operate this machine
• DO only use the approved chargers to charge the batteries for this machine
• DO NOT expose the motor power unit to excessive amounts of water of pressurised jets of water
• DO always close the protective covers on the machine when in operation or stored outside.
• DO NOT obstruct any ventilation holes or vents
• DO NOToperatethemixerinexplosiveatmospheres,suchasinthepresenceofammableliquids,gasesordusts
• DO remove the battery when storing or transporting the mixer
• DO avoid damaging the motor housing. DO NOT drop or rest the mixer onto its motor housing. DO NOT rest heavy or sharp
objects on the housing during storage or transportation.
• DO keep batteries away from other metal objects when storing or transporting them. Keys, tools, nails, screws and other small
 metalobjectscouldcauseashortcircuitbetweenthebatteryterminals.Thiscouldresultinburns,reorbatterydamage.
• DOMaintainthemixeringoodworkingorder.Cleanregularlyandensureallcovers,guards&warningdecalsareinplace.Clean
 themachinewithasti󰀨non-metallicbrushandadampclothwithmildsoap.DO NOT use solvents or harsh chemicals for cleaning
non-metallic parts of the mixer. These chemicals may weaken the materials. DO NOT immerse parts in water or allow water to
enter the vents and openings of the motor housing.

16
Safety Instructions
GB
BATTERY CHARGER
• To reduce the risk of injury, ONLYchargeCramer82vBAB733,BAB735&BAB737typerechargeablebatteries.Othertypesof
batteries may burst causing personal injury and damage.
• This Battery Charger is not intended for use by children or persons with physical, sensory or mental limitations or a lack of
experience or knowledge. DO NOT allow children to play with this Battery Charger - IT IS NOT A TOY!
• Charge only Li-ion Battery Packs that do not exceed a capacity of 8AH 82v. The battery voltage must match the battery
charging voltage of the Battery Charger. DO NOTchargenon-rechargeableBatteryPacks,otherwisethereisdangerofre
and explosion.
• ContinueduseoftheBatteryChargerunderunusualconditionscouldresultinreorelectricshock,whichmaykillorseriouslyhurt
you.
• DO NOTmodifytheBatteryCharger.Modifying,disassemblingorrepairingtheBatteryChargercouldresultinreorelectricshock,
which can cause death or serious injury. Disassembly and repairs require specialised knowledge, contact your servicing dealer.
• BeforeusingtheBatteryCharger/chargingaBatteryPack,peoplewhoareusinganelectronicmedicaldevicesmustconrmhow
 theirdevicemightbea󰀨ected.Theelectromagneticradiationproducedduringchargingmaya󰀨ecttheoperationofelectronic
medical devices, which may kill or seriously hurt you.
• IftheBatteryPackleaksuidorsmellsstrangely,stopusingitandconcactyourservicingdealer.BatteryPackcontains
combustible organic solvents as an electrolyte solution. Mistakenly handling them may result in burns or serious injuries (See
 SafetyDataSheet).
DO NOT use the Battery Charger in the following situations.
• Locations where the Battery Charger becomes unstable.
• Locationswherethereisammablegasorcombustiblematerials
• Locations that are very cold or very hot, such as in direct sunlight or near a heater
• Locations exposed to water or excessive humidity
• Locations where children or pets might play with it
ALWAYS follow the rules below.
• DO NOT charge Battery Packs if there is the risk of a lightning storm.
• DO NOT charge if the electric outlet is loose.
• DO NOT charge if the Battery Charger, AC cable, or the electric outlet is damaged or deformed, dusty, dirty, or rusty.
• DO NOT plug too many power cords into one electric outlet.
• DO NOT charge while the AC cable is wound up.
• DO NOT stand on or place heavy objects on the Battery Charger or AC cable.
• DO NOT pull or repeatedly bend the AC cable or charging cable with an excessive force.
• DO NOT touch the Battery Charger or AC cable if your hands are wet.
• DO NOT splash or submerge the Battery Charger or AC cable in water.
– If the Battery Charger or AC cable is submerged in water while you are charging, do not touch the Battery Charger or AC cable.
Contact your servicing dealer.
• DO NOTleavetheACplugpluggedintotheelectricoutletafteryounishcharging.
• DO NOT pull on the cable when you pull out the AC plug.
• DO NOT subject the Battery Charger to excessive physical shock, such as by dropping or hitting it.
• DO NOT use the Battery Charger to charge anything except authentic Battery Packs. Charging a non-authentic Battery Pack could
damage it and the charger because of poor protection functions, etc.
• DO NOTtouchtheBatteryPackterminalswithmetal.Mishandlingthemcouldresultinelectricshockorre,whichmaykillor
seriously hurt you. Follow the procedures and instructions provided in the manufacturers manual.

17
Safety Instructions
GB
BATTERY PACK
• ALWAYS use a genuine battery pack that is intended for this machine.
• DO NOT disassemble the battery pack.
• DO NOT touch the Battery Pack’s connectors with metal objects or insert metal objects through openings into the Battery Pack.
• ALWAYS keep the battery pack clean and dry.
• NEVER allow the battery pack to come into contact with water.
• IftheBatteryPackleaksuidorsmellsstrangely,IMMEDIATELYmoveitawayfromanyheatsourcesorame.Thereisariskof
 reorrupturingiftheleakedliquidorgasignites.
• The Battery Pack contains combustible organic solvents as an electrolyte solution. If the liquid gets into your eyes, rinse them with
plenty of water. After that, IMMEDIATELY seek medical care. (SeeSafetyDataSheet).
• DO NOT allow children to use the Battery Pack. Store the Battery Pack out of the reach of children.
• DO NOT store the Battery Pack in a damp location. Doing so can cause a malfunction.
• When the Battery Pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or
 are.
• Incaseofre,STOP using the machine immediately and extinguish with dry chemical, sandy soil, carbon dioxide or appropriate
foam.
• The Battery Pack will deteriorate if it is repeatedly charged and discharged, as well as if it is stored and not used.
• As the Battery Pack deteriorates, its full-charge capacity decreases and the length of time it can be used shortens. Once the full-
charge capacity is reduced by deterioration, it cannot be recovered and cannot reach the charging capacity of a new Battery Pack.
• ALWAYS remove the battery pack from the power unit when transporting or maintaining it.
• ONLY charge the battery pack in a recommended charging unit.
• DO NOT expose the battery pack to extreme temperatures (below-14°C(6.8°F)orabove40°C(104°F))
• NEVER attempt to service a damaged battery pack.
• WORK ON THE BATTERY PACK OR POWER UNIT MUST ONLY BE CARRIED OUT BY SUITABLY COMPETENT &
QUALIFIED PERSONNEL
WEATHER CONDITIONS
• We recommended that this machine not be used in heavy rain.
• Rain can alter the condition of the worksite surface area. ALWAYS be aware of the condition of the surface after it has rained.
• Operating the machine in poor visibility can result in serious injury or even death. ALWAYS use lighting to improve the visibitlity
of the area.
• NEVER operatethemachineintemperaturesbelow5°C(41°F)orabove40°C(104°F)
DURING MAINTENANCE
• ALWAYS remove the battery before carrying out any maintenance on the machine.
• Carry out maintenance and repair work only if the machine is positioned on stable and level ground and has been secured against
inadvertent movement.
• NEVER service the machine while the power unit is running, always switch OFF and remove the battery.
• Clean the machine before carrying out maintenance/repair.
• When dismantling assemblies containing components under pressure from springs, always wear suitable PPE. This will protect
 againsteyeinjuriesfromaccidentalyingcomponents.
• When handling oil, grease and other chemical substances, observe the product related safety regulations.
AFTER MAINTENANCE
• ALWAYS tighten any screwed connections that have been loosened during maintenance and repair.
• Anysafetydevicesremovedforset-up,maintenanceorrepairpurposesmustberettedandcheckedimmediatelyuponcompletion
of the maintenance and repair work.
• ENSURE that all consumables and replaced parts are disposed of safely and with minimum environmental impact.
MODIFICATIONS & REPLACEMENT PARTS
• NEVERmakeanymodicationsoradditionstothemachinewithoutthepriorapprovalofAltradBelle.Anyunapproved
 modicationsmaya󰀨ecttheperformanceandsafetyofthemachine.ThismayalsovoidtheWarranty.
• ALWAYSusegenuineAltradBellereplacementparts.Useofnon-genuinereplacementpartsmaya󰀨ecttheperformanceand
safety of the machine. This may also void the Warranty.
Genuine Altrad Belle replacement parts can be purchased online at www.Altrad-Belle247.com

18
Safety Instructions
GB
SAFETY DECALS
A
E
C
F
A
A
A
A
A
A
B
A
D
A
A
G

19
Safety Instructions
GB
* Also see Technical Data section for Noise Level for this machine.
C. No pressure washing symbol.
101
*Indicates the
Noise Level
of the
Machine
SAFETY DECALS
A. Branding Decals
B. General Safety / Info Decal.
Read the
Operators
Manual
Wear Ear
Protection
Wear Eye
Protection
Remove Battery
Before
Transporting
DO NOT
Jetwash the
Machine
D. Stand Assembly Decal.
Includes on how to place the mixer onto the stand base.
2
1
3
Wear Protective
Footwear

20
Safety Instructions
GB
SAFETY DECALS
E. Battery Removal Decal.
Shows the correct procedure for removing the battery from the power unit.
1. Push down lightly onto the top of the battery with the palm of your hand.
 2. Whilststillpushingdown,pressandreleasethebatteryretaininglatchwiththengersofthesamehand.
Remove your hand from the top of the battery and it should rise slightly.
3. Grip the top of the battery with one hand across the 2 short faces.
4. Lift the battery slowly. Once the battery slides halfway out of the housing grip the middle of the battery with the second hand.
F. Cover Removal Decal.
The battery MUST be removed from the power unit BEFORE any protective covers are removed.
WARNING
G. Motor Rating Decal.
Shows the correct
130
Ltr 90
Ltr
15.0A
1.5 kW
Read the
Operators Manual
Electrical
Hazard!
Max. Drum
Capacity
Max. Mixing
Capacity
Nominal Current
& Nominal Power
82 VDC
20.0A Max 2600 rpm
15.0A
1.5 kW
Nominal Voltage Motor RPM Double Insulated
Product
Max. Mixing
Capacity
Nominal Current
& Nominal Power