AmazonBasics B01BGY010C User manual

created by: Impala Services Ltd.Page size: 139.7 x 107.95 mm
B01BGY010C B01BGY043Q B01BGY6GPG
Security Safe 20 Litres 28 Litres 34 Litres
Coffre-Fort 20 Litres 28 Litres 34 Litres
Tresor 20 Liter 28 Liter 34 Liter
Cassaforte 20 Litri 28 Litri 34 Litri
Caja Fuerte 20 Litros 28 Litros 34 Litros
金庫 20リットル 28リットル 34リットル
保险柜 20L 28L 34L
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 1 9/8/16 3:49 PM

English ..................................... 3
Français ................................. 17
Deutsch.................................. 31
Italiano................................... 45
Español.................................. 59
日本語 ..................................... 73
中文 ........................................ 87
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 2 9/8/16 3:49 PM

3
Welcome Guide •English
Security Safe
Contents:
Before getting started, ensure the package contains the following components:
Part Qty
Security safe 1
Emergency key 2
Expansion bolts 4
Note: The default preset password is “159”, change it immediately.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 3 9/8/16 3:49 PM

4
Product Overview
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 4 9/8/16 3:49 PM

5
Setup
Step 1:
Setting Up the Product
Opening the Safe - First Time
To open the safe the first time you will need to use the emergency key.
Remove the cover of the emergency lock .
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 5 9/8/16 3:49 PM

6
Setup
Step 2:
Setting Up the Product
Insert the emergency key and turn it clockwise.
Turn the knob clockwise to open the door.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 6 9/8/16 3:49 PM

7
Setup
Step 3:
Setting Up the Product
Open the door. Open the battery compartment and insert 4 x AA batteries (not included).
NOTE: When the batteries run out, the icon will turn on. Replace the batteries then.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 7 9/8/16 3:49 PM

8
Setup
Step 4:
Setting the Password
With the door open, press the Reset button . The safe will emit two beeps.
Choose a new password (3-8 digits), punch it on the keypad and press the #key to confirm.
If the icon turns on, the new password is successfully set.
If the icon flashes, the safe failed to set the new password. Repeat the steps above until
successful. NOTE: Test the new password with the door open before locking the door.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 8 9/8/16 3:49 PM

9
Setup
Step 5:
Securing to a Floor or Wall
Select a stable, dry and secure location for your safe.
If bolting to a wall, make sure that your safe is resting on a supporting surface (such as the floor or a
shelf). Do not bolt your safe to both the floor and wall.
Place the safe on the selected location. Use a pencil to mark the mounting holes on the floor or wall.
Move the safe and drill 2-inch-deep mounting holes (~50mm) using a 12mm drill bit.
Move the safe back in place, align the mounting holes to the openings in the safe. Insert the
expansion bolts (included) through the holes and into the mounting holes and tighten them securely.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 9 9/8/16 3:49 PM

10
Operation
Opening the Safe - Using Your Password
Input your password (3 to 8 digits) on the keypad. Press #key to confirm.
The icon turns on.
Rotate the knob clockwise and open the door.
NOTE: The default preset password is “159”, change it immediately.
Locking the Safe
Close the door, then turn the knob counterclockwise to lock it.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 10 9/8/16 3:49 PM